Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Evaluation on the toxicity of ionic liquid mixture with antagonism and synergism to Vibrio qinghaiensis sp.-Q67

Ionic liquids (ILs) are a fascinating group of new chemicals with the potential to replace the classical volatile organic solvents, stimulating many applications in chemical industry. In case ILs are released to the environment, possible combined toxicity should be taken into account and it is, however, often neglected up to now. In this paper, therefore, the concentration-response curves (CRCs) of four groups of IL mixtures with various mixture ratios to Vibrio qinghaiensis sp.-Q67 were determined using the microplate toxicity analysis and were compared to the CRCs predicted by an additive reference model, the concentration addition (CA) or independent action (IA), to identify the toxicity interaction. It is showed that most of the IL mixture rays displayed the classical addition while the remaining rays exhibited antagonism or synergism. Moreover, it is found that the pEC₅₀ values of the mixture rays exhibiting antagonism or synergism are well correlated with the mixture ratio of a certain IL therein.     

Spatial distribution of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs) in an e-waste dismantling region in Southeast China: Use of apple snail (Ampullariidae) as a bioindicator

Fengjiang is a large e-waste dismantling site located in southeast China. In this paper, apple snail and soil samples were collected from this e-waste dismantling site and 25 vicinal towns to investigate the contamination status, spatial distributions and congener patterns of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs). Total PCB concentrations in apple snails (3.78-1812 ng g⁻¹ dry weight (dw)) were significant higher than that in soil samples (0.48-90.1 ng g⁻¹ dw). PBDE (excluding BDE 209) concentrations in apple snail and soil samples ranged from 0.09 to 27.7 ng g⁻¹ dw and 0.06 to 31.2 ng g⁻¹ dw, respectively. Concentrations of PCBs and PBDEs in snails and soils correlated negatively with the distance from Fengjiang. Both the concentrations and profiles of the pollutants were significantly correlated (p < 0.05) between the snail and soil samples, indicating the suitability of apple snail as a reliable bioindicator for PCBs and PBDEs contamination in this region. Relatively high concentrations of PCBs and PBDEs at locations far from e-waste dismantling sites implied that these pollutants have been transported to surrounding regions.     

Accumulation and quantitative estimates of airborne lead for a wild plant (Aster subulatus)

Foliar uptake of airborne lead is one of the pathways for Pb accumulation in plant organs. However, the approximate contributions of airborne Pb to plant organs are still unclear. In the present study, aerosols (nine-stage size-segregated aerosols and total suspended particulates), a wild plant species (Aster subulatus) and the corresponding soils were collected and Pb contents and isotopic ratios in these samples were analyzed. Average concentration of Pb was 96.5 ± 63.5 ng m⁻³ in total suspended particulates (TSP) and 20.4 ± 5.5 ng m⁻³ in the fine fractions of size-segregated aerosols (SSA) (<2.1 μm), higher than that in the coarser fractions (>2.1 μm) (6.38 ± 3.71 ng m⁻³). Enrichment factors show that aerosols and soils suffered from anthropogenic inputs and the fine fractions of the size-segregated aerosols enriched more Pb than the coarse fractions. The order of Pb contents in A. subulatus was roots > leaves > stems. The linear relationship of Pb isotope ratios (²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb) among soil, plant and aerosol samples were found. Based on the simple binary Pb isotopic model using the mean ²⁰⁶Pb/²⁰⁷Pb ratios in TSP and in SSA, the approximate contributions of airborne Pb into plant leaves were 72.2% and 65.1%, respectively, suggesting that airborne Pb is the most important source for the Pb accumulation in leaves. So the combination of Pb isotope tracing and the simple binary Pb isotope model can assess the contribution of airborne Pb into plant leaves and may be of interest for risk assessment of the exposure to airborne Pb contamination.     

CGE Simulation for Levying Carbon Tax in China and International Experience of Levying Carbon Tax

Levying carbon tax is conducive to reducing carbon dioxide emissions and protecting the environment.The author firstly reviewed some relevant empirical studies on carbon tax both home and abroad,and then established the CGE model and simulated levying carbon tax in China.The study found that levying carbon tax would have little impact on China’s economy:in a short-term,China’s GDP might decrease by 0.51%,while in a long-term it might decrease by 0.08%;however,the carbon dioxide emissions would be substantially reduced.Meanwhile,levying carbon tax has some negative impact on the output of each industry in the very economic structure;of this,the mineral extractive industries would be influenced the most.Then the author summarized experience of levying carbon tax in foreign countries.     

XAFS study of starch-stabilized magnetite nanoparticles and surface speciation of arsenate

It has been shown that starch can effectively stabilize nanoscale magnetite particles, and starch-stabilized magnetite nanoparticles (SMNP) are promising for in situ remediation of arsenic-contaminated soils. However, a molecular level understanding has been lacking. Here, we carried out XAFS studies to bridge this knowledge gap. Fe K-edge XAFS spectra indicated that the Fe-O and Fe-Fe coordination numbers of SMNP were lower than those for bare magnetite particles, and these coordination numbers decreased with increasing starch concentration. The decrease in the average coordination number at elevated stabilizer concentration was attributed to the increase in the surface-to-volume ratio. Arsenic K-edge XAFS spectra indicated that adsorbed arsenate on SMNP consisted primarily of binuclear bidentate (BB) complexes and monodentate mononuclear (MM) complexes. More BB complexes (energetically more favorable) were observed at higher starch concentrations, indicating that SMNP not only offered greater adsorption surface area, but also stronger adsorption affinity toward arsenate.     

Tissue distribution of Dechlorane Plus and its dechlorinated analogs in contaminated fish: high affinity to the brain for anti-DP

Information on tissue distribution of Dechlorane Plus (DP) and its dechlorinated analogs in wildlife is scarce. DP isomers and two dechlorinated compounds, anti-Cl₁₁-DP and anti-Cl₁₀-DP, were examined in the muscle, liver, and brain tissues of two bottom fish species collected from an electronic waste recycling site, South China. The median levels of syn-, anti-, and anti-Cl₁₁-DP isomers in the tissues ranged 0.18-39.1, 0.22-52.9, and 0.01-5.63 ng/g wet wt, respectively. Anti-Cl₁₀-DP was only detected in one muscle sample of mud carp (0.01 ng/g wet wt), although it was consistently detected in the sediments (0.42-0.83 ng/g dry wt). Preferential distribution in liver relative to muscle was observed for syn-DP and anti-Cl₁₁-DP. However, a high persistent retention in the brain compared to the liver was observed for anti-DP, suggesting that this isomer can across the blood-brain barrier of fish, and may cause adverse effects to the nervous system in the exposed biota.     

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities.     

Natural resistance of rose petals to microbial attack

Petals of red, yellow and white roses (Rosa damascene Mill.) of the family Rosaceae were extracted with (1:1) methylene chloride/methanol and tested for their antimicrobial activities against four species of Gram-positive bacteria (Bacillus cereus, Bacillus subtilis, Micrococcus luteus and Staphylococcus aureus), five species of Gram-negative bacteria (Enterobacter aerogenes, Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa and Serratia marcescens) and five species of fungi (Penicillium notatum, Aspergillus niger, Rhizopus stolonifer, Saccharomyces cerevisiae and Fusarium oxysporum). All of the crude extracts showed a wide range of antimicrobial activities according to the tested organism and rose's type. Micrococcus luteus was found to be the most susceptible bacteria to all crude extracts. Red and yellow petal extracts showed much higher antibacterial activity than the white petals extract. Bacillus subtilis was found to be the least susceptible to all extracts. The fungus, Penicillium notatum was found to be the most susceptible with white petal extract being the most effective. Saccharomyces cerevisiae and Fusarium oxysporum were the least susceptible to all extracts. White roses extract showed much higher antifungal activities against Penicillium notatum than red or yellow roses, therefore, it was subjected to several bioassay guided chromatographic fractionations and purification to isolate the active chemical(s) responsible for the antifungal activity. Chemical structure of the isolated antifungal compounds were identified by spectroscopy techniques and found to be a γ-sitosterol and (Z,Z)-9,12-octadecadienoic acid. Antibacterial activity of the various types of rose extracts were due to complex mixtures of organic compounds which are still under chemical investigation and will be published later.