佛山市创建生态市差距分析与策略研究

生态市建设是探索区域生态文明的准备阶段,亦是区域可持续发展道路的重要阶段。成功的生态市创建策略是在充分认识本区域发展现状及创建差距的基础上,抓住重点任务作出科学、合理、可操作的政策措施。佛山市提出了在2015年建成国家生态市的奋斗目标,时间紧任务重,必须尽快制定行之有效的策略。本文重点分析佛山市目前经济、生态环境与社会进步等方面与生态市考核指标要求之间的差异,在此基础上识别佛山市创建生态市的重点任务,进一步研究相应的配套政策需求。     

酸性水汽提及硫磺回收工艺的研究及应用研究

文章主要通过对酸性水气体及硫磺回收工艺特点的介绍与比选,着重分析“无在线炉硫磺回收及尾气处理工艺”（SSR）,其中硫回收为一段高温转化,二级催化转化的克劳斯工艺,尾气处理为加氢还原一吸收工艺,并介绍原辅材料成分及处理效率。该工艺能够有效解决石化企业的酸性气及酸水排放问题,具有良好的社会、环境效益显著。     

河流健康评估的研究与应用进展研究

自20世纪50年代以来,河流健康越来越受到社会的广泛关注。河流健康的概念、评估方法、范围、内容和指标体系得到不断拓展和完善。目前常用的两类河流健康评估方法是综合指标评估法和指示生物评估法。综合指标评估法采用河流水文、水质、生态系统等多个指标,能较全面地反映河流生态系统的健康状况,但是存在指标数量不易精简、部分指标难以量化等不足支出。在实际应用中更为常用的是指示生物评估法,采用鱼类、大型无脊椎动物、浮游藻类等指示生物的动态变化反映河流健康状况,方法更为简单直观。     

汶川地震余震地震动衰减关系研究

2008年汶川8.0级特大地震发生后,又发生了多次余震,震区的固定台站和流动台站因此获取了上万条MS3.3～6.4级地震动观测记录。地震记录显示这些余震的震中距和震级分布比较均匀,为建立地震动衰减关系奠定了较好的数据基础。本文基于汶川地震MS3.3～6.4震级范围内、震中距小于150 km区域范围的余震观测数据进行了统计回归分析,建立了汶川地震余震(MS≤6.4)的衰减关系模型,并对地震动加速度峰值(PGA)给出了具体的衰减关系表达式。     

液态聚合氯化铝铁深度除磷的优化研究

以北京市生活废水为研究对象,考察了液态聚合氯化铝铁及与聚丙烯酰胺(PAM)协同作用下除磷效果及其影响因素。结果表明,液态聚合氯化铝铁与PAM复合作用时对除磷效果有一定的提高,明确了PAM的最佳投加量、最佳搅拌强度、最佳搅拌时间和pH,并得出了影响混凝效果因素的主次顺序为:pH值搅拌时间搅拌强度投加量。     

黄河入河沙漠颗粒物对磷酸盐的吸附特征

研究了黄河入河沙漠颗粒物在天然水(河水和海水)中对磷酸盐的吸附行为,用改进的Langmuir和Freundlich等温吸附模型对实验数据进行了拟合.结果表明,①改进的Langmuir等温吸附模型更适用于描述黄河入河沙漠颗粒物对磷酸盐的吸附特征,其物理意义更明确,得到的拟合参数更合理;②颗粒物对磷的最大吸附容量Qmax变化范围为41.322～357.143mg.kg-1,其中居延海颗粒物Y2的Qmax最大.Qmax与颗粒物(Y1～Y5)的有机质有着极显著的正相关关系;③除巴丹吉林沙漠颗粒物Y1外,颗粒物的临界磷平衡浓度EPC0值均大于其相应水体的磷浓度.Y1在黄河水中吸附磷的EPC0小于相应水体的磷浓度0.0100.053 mg.L-1,而在渤海海水中却大于相应水体的磷浓度0.1090.074 mg.L-1,表明Y1吸附了黄河水中的磷,进入渤海后Y1原有吸附可交换态磷NAP转移到海水中.其它颗粒物与相应水体进行磷交换的过程中存在着解吸磷的现象,具有向相应水体释放磷的能力;④黄河入河沙漠颗粒物对磷酸盐的吸附等温线是过溶液浓度轴0.00的交叉型等温线,这种新型交叉型吸附-解吸模型较好地解释了其吸附特征和天然粒子的双重性作用.     

浅谈欧盟化学品新法规及其对我国石油化工行业的影响

介绍了即将实施的欧盟化学品新法规出台背景和主要内容,并浅析了新法规对我国石油化工行业的影响.     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

Adsorptive property of Cu^2＋-loaded montmorillonite clays for Escherichia coli K_（88） in vitro

The Cu²⁺-loaded montmorillonite clays (MMT-Cu) may be a good material for the adsorbed and eliminated pathogenic bacteria from aqueous solution.     

Effect of C/N ratio, aeration rate and moisture content on ammonia and greenhouse gas emission during the composting

Gaseous emission (N₂O, CH₄ and NH₃) from composting can be an important source of anthropogenic greenhouse gas and air pollution. A laboratory scale orthogonal experiment was conducted to estimate the effects of C/N ratio, aeration rate and initial moisture content on gaseous emission during the composting of pig faeces from Chinese Ganqinfen system. The results showed that about 23.9% to 45.6% of total organic carbon (TOC) was lost in the form of CO₂ and 0.8% to 7.5% of TOC emitted as CH₄. Most of the nitrogen was lost in the form of NH₃, which account for 9.6% to 32.4% of initial nitrogen. N₂O was also an important way of nitrogen losses and 1.5% to 7.3% of initial total nitrogen was lost as it. Statistic analysis showed that the aeration rate is the most important factor which could affect the NH₃ (p = 0.0189), CH₄ (p = 0.0113) and N₂O (p = 0.0493) emissions significantly. Higher aeration rates reduce the CH₄ emission but increase the NH₃ and N₂O losses. C/N ratio could affect the NH₃ (p = 0.0442) and CH₄ (p = 0.0246) emissions significantly, but not the N₂O. Lower C/N ratio caused higher NH₃ and CH₄ emissions. The initial moisture content can not influence the gaseous emission significantly. Most treatments were matured after 37 days, except a trial with high moisture content and a low C/N ratio.