四氯化钛精制除钒废弃物的综合利用

对四氯化钛铜丝除钒精制过程中产生的废弃物,采用酸碱联合法回收其中的铜和钒。考察了关键的碱处理及盐酸沉钒过程的影响因素。实验结果为：在碱处理溶液pH12．0—13．0,碱处理温度60℃,碱处理时间1h,沉钒溶液pH1．0～1．5,沉钒温度60℃,沉钒时间1h的条件下,铜和钒的回收率分别达到90％和75％以匕,获得的阴极铜和五氧化二钒的产品质量均达到国家标准。     

基于布谷鸟搜索优化的光伏电站辐照强度预测

针对光伏电站日前小时短期辐照强度的预测准确性问题,且考虑到支持向量机的学习参数对预测模型的性能有较大影响,为进一步提高数据的预测精度,利用布谷鸟搜索算法对支持向量机的惩罚因子c和核参数g进行优化,提出了一种基于布谷鸟搜索算法和支持向量回归的组合预测方法。仿真结果表明:该方法大大提高了光伏辐照强度预测的准确性和精度,可行且高效,适用于光伏在线预测。     

菲和镉单一及复合污染条件下在毛蚶体内的富集动力学研究

采用室内半静态双箱动力学模型实验,研究了菲和镉单一及复合污染条件下在毛蚶(Anadara subcrenata)体内的生物富集,通过对富集与释放过程中毛蚶体内菲和Cd的富集量进行非线性曲线拟合,获得了菲和Cd单一及复合污染条件下在毛蚶体内的吸收速率常数k1、释放速率常数k2、生物富集因子BCF、生物半衰期B1/2和平衡状态下最大富集量CA max等动力学参数。实验结果表明,菲和Cd在实验前期富集速率较高,8 d以后富集速率减缓,释放阶段与富集阶段相似。毛蚶对菲的BCF值为37.80,远大于Cd的BCF值13.12,且生物半衰期时间更长,菲更容易在生物体内富集。菲和Cd联合暴露条件下,在毛蚶体内的CA max和BCF值均大于单一作用,说明二者同时暴露时,毛蚶对菲和镉的吸收富集均有所增强。实验模型拟合度较好,输出值和实测值之间无显著性差异,拟合方程和拟合参数可信。     

基于统计方法的辽东湾沉积物中多环芳烃来源特征分析

为研究辽东湾表层沉积物中多环芳烃(PAHs)的来源特征,2014年5月采集了20个辽东湾海域表层沉积物样品,并利用气相色谱质谱联用仪对优先控制的16种PAHs进行测定,采用聚类分析、主成分分析-多元线性回归分析、异构体比值3种统计方法对辽东湾表层沉积物中PAHs来源特征进行了研究。结果表明,辽东湾表层沉积物中PAHs含量范围88.5~199.3 ng·g-1,平均值为(126.3±35.3)ng·g-1,其中,萘、菲和荧蒽是PAHs优势组分。通过统计分析结果表明,辽东湾北部表层沉积物中PAHs含量低于西南部,沉积物中PAHs的来源包括石油燃烧来源、煤炭、木材等生物质燃烧来源和石油来源,其中燃烧来源是主要来源,煤炭、木材等生物质燃烧来源占49.9%,石油燃烧来源和石油来源占50.1%。     

Cancer risk from gaseous carbonyl compounds in indoor environment generated from household coal combustion in Xuanwei,China

Airborne carbonyls were characterized from emitted indoor coal combustion. Samples were collected in Xuanwei (Yunnan Province), a region in China with a high rate of lung cancer. Eleven of 19 types of samples (58%) demonstrated formaldehyde concentrations higher than the World Health Organization exposure limit (a 30-min average of 100 μg m^?3). Different positive significant correlations between glyoxal/methylglyoxal and formaldehyde/acetaldehyde concentrations were observed, suggesting possible different characteristics in emissions between two pairs of carbonyl compounds. A sample in the highest inhalation risk shows 29.2 times higher risk than the lowest sample, suggesting different coal sampling locations could contribute to the variation of inhalation risk. Inhabitants in Xuanwei also tend to spend more time cooking and more days per year indoors than the national average. The calculated cancer risk ranged from 2.2–63 × 10^?5, which shows 13 types of samples at high-risk level. Cumulative effect in combination with different carbonyls could have contributed to the additive actual inhalation cancer risk. There is a need to explicitly address the health effects of environmentally relevant doses, considering life-long exposure in indoor dwellings.     

Spatial variation and toxicity assessment for heavy metals in sediments of intertidal zone in a typical subtropical estuary (Min River) of China

Environmental Science and Pollution Research - Sediment samples were collected in five marshes (C1, Phragmites australis marsh; C2, P. australis and Cyperus malaccensis marsh; C3, C. malaccensis...     

Kinetics and mechanism for omethoate degradation by catalytic ozonation with Fe(III)-loaded activated carbon in water

The kinetics and mechanism for degradation of omethoate (OMT) by catalytic ozonation with Fe(III)-loaded activated carbon (Fe@AC) were investigated in this study with focus on identification of degradation byproducts. The rate constants of OMT reacting with ozone and hydroxyl radical (OH) were determined to be 0.04 and 5.3 × 10⁸ M^?1 s^?1 at pH 7.5 and 20 °C, respectively. OMT was predominantly degraded by OH in the catalytic ozonation with Fe@AC. The high-molecular-weight degradation byproducts identified were O,O,O-trimethyl phosphoric ester (TMP), pyrrolidin-2-one, N-methyl-2-sulfanylacetamide, 2-(methylthio)acetamide, O,O,S-trimethylthiophosphate (STMP), and N-methyl-2-(methylthio)acetamide. Besides, low-molecular-weight organic acids and inorganic anions were also detected and quantified, including formic, acetic and oxalic acids as well as nitrate, sulfate and phosphate ions. In the catalytic ozonation, TMP and phosphate were two major P-containing byproducts resulting from OMT degradation. The toxicity of OMT solution gradually decreased during the catalytic ozonation, indicating that Fe@AC is a safe catalyst for OMT removal by ozone in water.     

Removal of sulfamethoxazole and sulfapyridine by carbon nanotubes in fixed-bed columns

Sulfamethoxazole (SMX) and sulfapyridine (SPY), two representative sulfonamide antibiotics, have gained increasing attention because of the ecological risks these substances pose to plants, animals, and humans. This work systematically investigated the removal of SMX and SPY by carbon nanotubes (CNTs) in fixed-bed columns under a broad range of conditions including: CNT incorporation method, solution pH, bed depth, adsorbent dosage, adsorbate initial concentration, and flow rate. Fixed-bed experiments showed that pH is a key factor that affects the adsorption capacity of antibiotics to CNTs. The Bed Depth Service Time model describes well the relationship between service time and bed depth and can be used to design appropriate column parameters. During fixed-bed regeneration, small amounts of SMX (3%) and SPY (9%) were irreversibly bonded to the CNT/sand porous media, thus reducing the column capacity for subsequent reuse from 67.9 to 50.4 mg g^?1 for SMX and from 91.9 to 72.9 mg g^?1 for SPY. The reduced column capacity resulted from the decrease in available adsorption sites and resulting repulsion (i.e., blocking) of incoming antibiotics from those previously adsorbed. Findings from this study demonstrate that fixed-bed columns packed with CNTs can be efficiently used and regenerated to remove antibiotics from water.     

陶瓷膜污染过程分析与膜清洗方法优化

采用膜孔径为50 nm的陶瓷膜错流过滤方式,对碱性高浓度有机洗涤废水进行9个周期的膜通量衰减及反向脉冲清洗再生实验研究.通过设计膜污染阻力构成实验,测算膜污染总阻力及其构成比例.实验结果表明,膜固有阻力比例较低,浓差极化污染较弱,Rt和Rc+Rirt污染阻力稳定性较高,膜堵塞形式兼有孔内堵塞和滤饼过滤;选择质量分数0.1％的稀盐酸和0.2％的草酸溶液膜清洗效果均较好,清洗时间为3 min,脉冲时间和频率为3 s/5 s.     

过硫酸钾去除水中的TCE

以地水中的氯代烃污染物三氯乙烯(TCE)为目标污染物,以过硫酸钾溶液为氧化剂,探讨了不同条件下过硫酸钾对TCE的去除效果。实验结果表明,在40℃,过硫酸钾初始浓度为2.43 g/L条件下,反应2 h后,TCE的去除率就可达到96.8%;过硫酸钾对TCE的去除符合一级反应动力学方程,速率常数(K)为1.3364 h-1,半衰期(t1/2)为0.51 h;过硫酸钾对TCE的去除速率在pH为中性附近时最大,其后无论pH升高或降低去除速率均减小;受温度和pH影响较明显,并且反应温度越高,受pH的影响越明显;随离子强度的增加而减小;反应活化能为119.6 kJ/mol;过硫酸钾溶于水生成过硫酸根离子(S2O28-),S2O28-会进一步生成硫酸根自由基(SO4-.),在碱性条件下,SO4-.与OH-反应会进一步生成羟基自由基(.OH)。过硫酸钾对于TCE的去除主要源自SO4-.和.OH的强氧化性。