生物物种信息平台建设进展研究

信息技术的突飞猛进和互联网的迅速扩张,为生物多样性信息的收集、存储、提交、检索、分析、传播和使用带来了革命性的发展。生物多样性数据和信息服务的内容逐步从单一的名录数据库建设转向为多学科交叉的综合信息服务平台。本文结合国家生物多样性保护专项,在介绍国内外主流生物多样性信息平台建设现状的基础上,分析了我国现有平台存在的问题,并对下一步如何完善和推进平台应用进行探讨。     

三峡水库消落区土壤、植物汞释放及其在斑马鱼体的富集特征

利用室内模拟试验,探讨了三峡水库消落区淹没后土壤、植物汞释放特征及其在斑马鱼体的富集水平.结果表明,随淹水时间的延长,淹没土壤中总汞(THg)含量下降;水体THg浓度总体明显升高.淹没土壤及水体中甲基汞(MMHg)含量总体明显上升,其中稗草+土壤处理水体中增加尤为明显,淹水21 d后,其浓度是土壤处理的2.52倍.表明消落区土壤、植物是水库水体汞的一个重要来源.供试稗草淹水分解造成水体pH及溶解氧(DO)含量下降、溶解性有机碳(DOC)含量上升,对土壤MMHg含量无明显影响,对水体MMHg影响较大.供试斑马鱼头部、内脏及肌肉中THg含量总体明显上升,与水体中THg浓度具有显著相关性(P<0.01).鱼体头部、内脏及肌肉中均出现不同程度的MMHg富集现象,以头部与肌肉最为明显.淹水21 d后,添加土壤处理的鱼体头部、内脏及肌肉MMHg增加的含量分别是对照的1.75~6.25、3.53~8.38、2.22~3.36倍;稗草+土壤处理的分别是土壤处理的3.57、2.37、1.52倍.可见,淹没土壤是鱼体MMHg增加的重要来源,淹没植物改变原水环境条件影响其向水体释汞过程能提高鱼体中MMHg含量.     

北京市污水资源化利用现状及其对策分析研究

北京是水资源严重匮乏的城市,水资源短缺已经成为制约北京经济社会可持续发展进程的重要因素.污水资源化将城市污水进行加工处理,转化为达标的、可供人们二次利用的合格水资源,既能增加水源,又能减少水环境污染,是解决北京目前水资源紧缺问题的最为有效的途径.文章梳理了近年来北京市污水资源化利用的发展现状,指出了北京市污水资源化利用所面临的困境,并提出了加快北京市污水资源化利用的对策.     

拟除虫菊酯杀虫剂对水生态系统的毒性作用

拟除虫菊酯杀虫剂主要用于防治棉田、菜地、果树和茶叶上的农业害虫以及卫生害虫,也用于渔业生产上杀灭寄生虫。近几年来其使用量越来越大,是传统有机磷农药的替代品。它具有高效广谱、低残留的特点,对光稳定,在哺乳动物体内代谢、排泄迅速,但是对水生态系统危害较大。报道了拟除虫菊酯杀虫剂对水生生物的急、慢性毒性和中毒机理的研究进展,阐述了有待研究的方向。     

分散式污水处理设施集约化管理创新探索

随着近年来大量农村污水处理设施的新建,项目污水处理设施面广、点多、单体规模小、污染物浓度变化大、经营困难等问题凸显,如何突破困境找到一条相对适合分散式污水处理设施的运营管理十分必要。本文提出了集约化管理创新探索,在生产标准化管理、人力资源管理、安全管理、设备设施管理及物资管理等方面全方位的总结了运营管理经验,为分散式污水处理设施管理提供了参考和借鉴。     

含锌废物综合利用项目环境影响评价工程探索

工业生产的废物当中包含多种重金属,例如钢铁厂的粉尘当中就含有锌。含锌粉尘不仅会在高炉内循环和富集,影响高炉的运行,还会造成环境污染。基于此,本文主要分析含锌废物综合利用,对该项目进行环境评价,探讨有效的对策,以提高含锌废物综合利用的科学性,提高环境保护等级。     

大气颗粒物中环境持久性自由基的电子顺磁共振检测方法

大气颗粒物中的环境持久性自由基具有强氧化性,参与大气中诸多化学反应,影响空气质量,进而影响人体健康,因此对其定性、定量检测具有重要意义,然而现阶段并没有成熟有效的分析检测方法.本文利用电子顺磁共振波谱仪,对比大气颗粒物的3种进样方式,建立了便捷、有效的大气颗粒物中环境持久性自由基检测方法.首先,配制不同标准物质(或溶液),确定仪器的最佳检测参数和大气颗粒物的最低响应浓度(或质量).然后,分别使用水洗脱法和有机溶剂提取法对大气颗粒物进行前处理,优化大气颗粒物的水洗脱和有机提取条件,对比大气颗粒物直接进样、水洗脱样和有机提取样的测定结果.最后,确定了上述3种进样方法的适用条件,即直接检测法适用于石英膜和Teflon膜样品,且操作简便,易于定量测定大气颗粒物中自由基的浓度;水洗脱法仅适用于Teflon膜样品,但需要已知颗粒物洗脱效率才能定量计算;有机溶剂提取法不能有效的提取的颗粒物上的自由基.     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.     

长江河口硅和磷生源要素质量浓度的变化特征

根据近年来长江河口区域内大通水文站的记录和近期在长江入海河口区上海段多个采样点的生源要素质量浓度实测数据,比较水中可溶性硅酸盐和磷酸盐的质量浓度,分析在长江入海河口区水中硅和磷元素含量的主要变化特征.结果表明,长江水中的硅酸盐和磷酸盐从长江入海河口进入大海的过程中,其质量浓度有降低的趋势,它们在长江入海河口的多年的质量浓度变化趋势是相反的.长江入海河口区域上游的磷酸盐质量浓度升高幅度较大,而硅酸盐变化不大,硅酸盐、磷酸盐质量浓度在长江河口区进入海洋的过程中迅速降低.