Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

长江三角洲城市群工业用水效率评价及时空差异研究

在水资源约束趋紧的背景下,选取长江三角洲城市群中26个城市2005~2014年的面板数据,运用SBM模型对工业用水效率进行测算,并基于可分解的泰尔指数分析长江三角洲城市群内部工业用水效率的空间差异。结果显示：（1）长江三角洲城市群工业用水效率水平整体偏低,在不考虑与考虑非期望产出的情况下,工业用水效率10a平均值分别为 0.591 8.和 0.519 7;（2）工业用水效率的地区内部差异是造成总差异的主要部分,并且有随时间递增的趋势,其中安徽省对于地区内部差异的贡献率最大,其次为浙江省,江苏省贡献率最低;（3）江苏省各城市工业用水效率虽然差异不大但整体水平较低,而上海市工业用水效率较高并处于稳步上升状态。因此,缩小地区内部差异是实现长江三角洲城市群工业用水效率整体上升的重要途径。     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

以红薯浸泡液为碳源的生物反硝化

为选择低碳氮比污水生物脱氮中合适的碳源,以搅拌罐浸泡淀粉类物质释放碳源,在确定利用红薯浸泡液为碳源后,以浸没式生物滤池为反应器进行生物反硝化实验。实验结果表明:20 g红薯置于2 L自来水中,采用250 r/m in的搅拌速度,搅拌频率为每搅拌3 h停1 h,2 d后得到的浸泡液COD浓度平均为5 921 mg/L,最高可超过7 000 mg/L;将此红薯浸泡液和污水以1∶50的流量比例,采用分别投加的方式进入反应器,污水中总氮、硝酸盐氮、亚硝酸盐氮及氨氮的平均去除率分别为88.6%、91.6%、88.2%和54.8%,出水COD平均在30 mg/L以下;在红薯浸泡液COD浓度为5 700 mg/L左右时,进水中亚硝酸盐氮浓度与硝酸盐氮浓度比为3∶2时总氮去除率为95.3%,当该比例为2∶3时总氮去除率为88.2%。研究表明,红薯浸泡液是一种经济合适的碳源,采用红薯浸泡液作为低碳氮比污水生物处理中反硝化的碳源是可行的。     

树脂固载纳米铁对偶氮染料直接湖蓝5B的脱色性能研究

以FeSO4和NaBH4水溶液为前驱溶剂,以聚苯乙烯型阳离子交换树脂为载体,制备了树脂固载的纳米铁,室温下用于对偶氮染料直接湖蓝5B水溶液进行脱色研究。研究结果发现,脱色反应遵循准一级反应动力学,在初始pH为3~10的范围内,反应进行14 m in时,50 mg/L的染料溶液脱色率均能达到83%以上。固载的纳米铁材料可多次重复利用,溶液中释放的铁离子浓度不超过0.1 mg/L。     

活性炭吸附和脱附-等离子体氧化净化有机废气的研究

根据滑动弧放电等离子体适于降解高浓度有机物废气的特性,结合活性炭吸附法,提出了吸附器的吸附浓缩和热脱附-等离子体氧化净化有机废气的方法。在活性炭吸附过程中,最初2 h内甲苯净化率达到100%,随着时间的增加净化率下降;在热脱附滑动弧放电等离子体净化过程中,甲苯降解效率最高为97.3%。将滑动弧放电等离子体反应器出口气相产物收集进行FT-IR检测,发现放电后有CO2、CO、H2O和NO2产生,并分析了甲苯的降解机理。     

我国城市居民健康状况及影响因素研究

随着中国城市化、工业化快速推进,城市居民的健康日益受到环境、外部压力等因素的影响,加上生活方式和健康观念方面的原因,城市居民健康状况的改善缓慢.利用2006年中国健康与营养调查(CHNS)截面数据,描述了我国城市居民的健康及其分布状况,利用Ordered Probit模型分析了影响城市居民的健康状况的各类因素.结果发现:家庭状况、生活习惯、就医决策、医疗保险等因素均影响城市居民的健康水平;尤其是在收入、工作等经济因素之外,健康观念、就医决策和保险覆盖等社会和制度因素亦对城市居民个人健康产生影响.同时,通过逐步回归控制相关变量的方法,检验了Grossman模型的适用性,同时也检验了影响因素作用机制的稳定性.在总结研究结论与不足的基础上,提出了应从经济,社会和制度三个层面全面促进城市居民健康的综合改革框架.     

Fe_2O_3/膨润土微波诱导氧化处理染料废水

以膨润土为载体,采用直接沉淀法制备了Fe2O3/膨润土负载型催化剂。制备催化剂的最佳工艺条件:硝酸铁质量浓度为8.08g/L,硝酸铁与膨润土质量比为1.0,焙烧温度为350℃,焙烧时间为3h。用Fe2O3/膨润土负载型催化剂微波诱导氧化处理50mL质量浓度为50mg/L的模拟活性嫩黄废水的最佳工艺条件:催化剂加入量为0.5g,微波功率为900W,微波作用时间为5min。在此条件下模拟活性嫩黄废水脱色率达96.40%。微波诱导氧化处理模拟活性嫩黄废水的反应符合一级反应动力学方程。     

长江三角洲生产性服务业的空间分布特征分析

在国家层面,生产性服务业向大都市地区聚集的趋势十分明显;在地区层面,生产性服务业在都市核心区集群化发展日益凸显。长三角地区生产性服务业发展不平衡,总体上初步形成了以上海生产性服务业与其他城市现代制造业相互促进的发展局面,产业之间的联系更加紧密,横向联系日益加强,推动着长三角地区产业竞争力和区域竞争力的提升。     

浅谈阿克苏地区工业污染源排放现状及环境管理工作中存在的问题和对策

根据阿克苏地区工业污染源排放现状及特点,分析了阿克苏地区环境监督管理工作中存在的问题,从提高环境监管力度、"三同时"制度管理水平、在线监控能力、优化产业结构等方面提出了相应的对策和建议。