丁二烯过氧化物的生成、危害及安全性研究

综述了国内外丁二烯过氧化物研究进展，主要包括丁二烯过氧化物的危害性、成因、危险评价和热稳定性，并对今后的研究方向进行了展望。     

珠江上游少数民族县域经济活动的累积环境效应研究--以贵州三都水族自治县为例

为了探索珠江上游少数民族区域经济活动的累积环境效应与生态安全，我们选择三都水族自治县作为定位研究基地．对建国以来区域内经济活动变迁进行历史、现状研究和综合评估，揭示历史时期发展政策、发展模式、重大经济活动等人为扰动因素在区域生态环境系统退化过程中的作用．评估少数民族经济活动的累积环境效应与生态安全。     

Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.     

全国大气扩散输送模态与区划研究

基于NCEP再分析气象资料,使用HYSPLIT模式对我国大陆区域进行了一整年的连续轨迹计算.轨迹以1°×1°的网格化经纬度分辨率进行计算.考虑气候、地理及经济因素,将全国计算区域分为10个大区,分别统计各大区出发的轨迹在全国的分布频率.根据全年和各季的轨迹统计结果,分析我国不同区域的大气输送扩散特征以及区域间大气环境的相互影响潜势.结果表明,全国10个大区的大气扩散输送模态可分为特性不同的7大类,其中以西北方向的3个大区为一类,西南高原的2个大区为另一类,其它各区自成一类.10个大区大气扩散物质的累积效应差异显著且季节变化特征各异.全国以西南区(XN)东部大气累积效应最强,东北区(DB)累积效应最弱.     

经度、纬度及时差设置对AERMOD预测结果的影响

为了验证经度、纬度和时差参数对AERMOD模式预测结果是否有影响,假设在某气象条件下存在一个点源,利用AERMOD模式计算该点源排放的污染物的浓度分布.保持气象条件和污染源参数不变,仅改变点源所在地的经度、纬度或时差,重新利用AERMOD模式进行了预测,比较预测结果的差异.结果表明,经度、纬度和时差参数对白天时段行星边界层参数的计算值有影响,受影响的参数包括地表热通量、摩擦速度、Monin-Obukhov长度、对流速度尺度、温度尺度和混合高度.经度、纬度和时差的不同取值对AERMOD计算出的污染物小时平均浓度最大值和浓度分布影响明显.根据AERMOD公式的描述和能量变化得出,经度、纬度和时差的改变引起了项目所在地白天太阳高度角的变化,进而改变了地表热通量.地表热通量的改变,造成了行星边界层参数的变化,最终影响了浓度分布的计算值.     

地质封存中CO_2盐水溶液的表观摩尔体积模型

在现有CO2盐水溶液密度模型的基础上,根据CO2地下盐水溶液密度实验数据,考虑了温度、压力和CO2质量分数三个参数的影响,建立了CO2盐水溶液的表观摩尔体积模型。模型结果表明该模型能在30~50℃、10~20 MPa温压范围内准确预测CO2在盐水溶液中的表观摩尔体积,将预测结果与实验数据进行对比发现最大相对误差为0.25%,平均相对误差为0.1%,模型预测精度明显高于现有的CO2盐水溶液表观摩尔体积模型,为CO2地下盐水层封存提供了必要的基础。     

吐纳麝香长期暴露下蚯蚓体内金属硫蛋白和谷胱甘肽变化

吐纳麝香(AHTN)作为人工合成麝香中多环麝香的典型代表,具有挥发性、易生物富集等特性,由于其在环境中的浓度日益升高,呈现出一定的生物效应,可能对生态系统的稳态存在着潜在的威胁,为探讨上述课题,试验通过采用自然土壤法以赤子爱胜蚓(Eiseniafetida)作为试验动物,首次研究测定蚯蚓在AHTN的长期暴露条件下,其体内金属硫蛋白和谷胱甘肽含量的变化。试验结果得出低浓度的AHTN能够抑制机体内金属硫蛋白和谷胱甘肽的生成,使得金属硫蛋白和谷胱甘肽的含量显著减少,在一定浓度范围内的AHTN对机体无明显不利影响,而高浓度的AHTN能够诱导机体内金属硫蛋白和谷胱甘肽的生成,使得金属硫蛋白和谷胱甘肽的含量显著增多(P<0.05),从而对土壤环境存在着潜在的生态风险。     

Biological sulfate removal from acrylic fiber manufacturing wastewater using a two-stage UASB reactor

A two-stage UASB reactor was employed to remove sulfate from acrylic fiber manufacturing wastewater. Mesophilic operation (35±0.5℃) was performed with hydraulic retention time (HRT) varied between 28 and 40 hr. Mixed liquor suspended solids (MLSS) in the reactor was maintained about 8000 mg/L. The results indicated that sulfate removal was enhanced with increasing the ratio of COD/SO₄^2-. At low COD/SO₄^2-, the growth of the sulfate-reducing bacteria (SRB) was carbon-limited. The optimal sulfate removal efficiencies were 75% when the HRT was no less than 38 hr. Sulfidogenesis mainly happened in the sulfate-reducing stage, while methanogenesis in the methane-producing stage. Microbes in sulfate-reducing stage performed granulation better than that in methane-producing stage. Higher extracellular polymeric substances (EPS) content in sulfate-reducing stage helped to adhere and connect the flocculent sludge particles together. SRB accounted for about 31% both in sulfate-reducing stage and methane-producing stage at COD/SO₄^2- ratio of 0.5, while it dropped dramatically from 34% in sulfate-reducing stage to 10% in methane-producing stage corresponding to the COD/SO₄^2- ratio of 4.7. SRB and MPA were predominant in sulfate-reducing stage and methane-producing stage respectively.     

纳米铁酸镍的制备及可见光催化性能研究

利用水热法制备了纳米铁酸镍,表征了其微观结构和光谱性能,并以罗丹明B溶液作为目标污染物,研究了铁酸镍催化剂的可见光催化性能。结果表明:所制备铁酸镍的微观形貌为由直径200-300 nm左右的类似球形小颗粒组成的大颗粒,平均粒径为95.60 nm,在紫外-可见光谱区均有较强的光吸收。光催化过程中催化剂的适宜用量为0.05 g,少量H2O2的加入有助于提高罗丹明B溶液的降解率。催化剂用量为0.05 g,加入0.4 mL 30%的H2O2,降解50 mL 20 mg/L罗丹明B溶液,模拟太阳光照射240 min后降解率能够达到99.2%。在实际太阳光照射下,240 min后罗丹明B溶液的降解率可以达到85.2%。     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.