试论凝灰熔岩——碎斑熔岩——花岗斑岩的成因联系

本文从岩相岩石学特征、地球化学演化,讨论了凝灰熔岩、碎斑熔岩、花岗斑岩三者之间的成因联系:它们是同源岩浆经分异结晶,形成岩浆房成分梯度和分带后,分别代表岩浆房从上到下不同部位成分岩浆依次侵位、在不同成岩条件下形成的一套岩石,可建立“三位一体”成岩模式.     

东南大陆岩石圈板块地体构造

东南大陆的地质构造模型,具有欧亚大陆边缘向洋增生的独特形式。除外来地体之外,或以扩张、地幔上涌,洋壳向大陆地壳转化,并不断向洋增生;或是大陆分裂,地幔柱——热点物质不断注入变薄和破裂了的地壳,形成区域性新的生长构造层,构造岩浆地质体表现为有独特属性的“A型”花岗岩和流纹岩链。这些高DI值的富硅富碱富钠质岩石,出现在欧亚大陆边缘的重力梯度带上。裂解带的地壳结构模式是上地壳存在着重力不稳定的硅铝低速带;中地壳有洋——陆过渡型地壳的“类裂谷型”结构,P波速度为6.3～6.4km/s的中间壳层;在下地壳下部有速度为7.0～7.4km/s的壳——幔混合型高速层;随着“异常”的上地幔的形成,有大范围的热活动和壳——幔边界穹窿,穹窿的地盖比正常区为为薄。由于化学库和化学边界层的横向不连续,可划分出古老基底和后期地质发展史完全迥异的两个亚板块;和以壳层(或幔层)断裂为边界特点的八个地体;一个以分裂为主,并具热点径迹的最新生长构造层的扩张——裂解构造岩浆地体。     

The relationship between light intensity and nutrient uptake kinetics in six freshwater diatoms

In order to find effective measures to control diatom blooms, a better understanding of the physiological characteristics of nutrient uptake in diatoms is needed. A study of P and Si-uptake kinetics for diatom species from two light regimes was conducted at low (LL), moderate (ML) and high light intensities (HL) (2, 25 and 80 μmol photons/(m²·sec)), respectively. The results showed that P uptake of diatoms was heavily influenced by historic light regimes. P affinity changed with growth and photosynthetic activity. The lowest half saturation constant for P uptake (K_m(P)) was under HL for high-light adapted diatoms while the lowest half-saturation constant for low-light adapted diatoms was observed under LL. The Si half-saturation constant (K_m(Si)) increased with increasing light intensities for pennate diatoms but decreased for centric diatoms. Diatom volumes were correlated with the maximum Si uptake rates (V_m(Si)) at HL and K_m(Si) at ML and HL for six diatom species. Our results imply that when we assess the development of diatom blooms we should consider light intensity and cell volume in addition to ambient Si or P concentration. The relationship between light intensity and P-uptake suggests that we can find suitable methods to control diatom blooms on the basis of reducing phytoplankton activity of P-uptake and photosynthesis simultaneously.     

Genomic analyses of metal resistance genes in three plant growth promoting bacteria of legume plants in Northwest mine tailings,China

To better understand the diversity of metal resistance genetic determinant from microbes that survived at metal tailings in northwest of China, a highly elevated level of heavy metal containing region, genomic analyses was conducted using genome sequence of three native metal-resistant plant growth promoting bacteria(PGPB). It shows that: Mesorhizobium amorphae CCNWGS0123 contains metal transporters from P-type ATPase, CDF(Cation Diffusion Facilitator), Hup E/Ure J and CHR(chromate ion transporter) family involved in copper, zinc, nickel as well as chromate resistance and homeostasis. Meanwhile, the putative Cop A/Cue O system is expected to mediate copper resistance in Sinorhizobium meliloti CCNWSX0020 while Znt A transporter, assisted with putative Czc D, determines zinc tolerance in Agrobacterium tumefaciens CCNWGS0286. The greenhouse experiment provides the consistent evidence of the plant growth promoting effects of these microbes on their hosts by nitrogen fixation and/or indoleacetic acid(IAA) secretion,indicating a potential in-site phytoremediation usage in the mining tailing regions of China.     

Do trace metal(loid)s in road soils pose health risks to tourists? A case of a highly-visited national park in China

Nowadays, more people tend to spend their recreational time in large national parks, and trace metal(loid)s in soils have attracted long-term attention due to their possible harm to human health. To investigate the pollution levels, potential sources and health risks of trace metal(loid)s in road soils, a total of eight trace metal(loid)s (including As, Cd, Cr, Cu, Ni, Pb, Zn and Hg) from 47 soil samples along roads were studied in the Huangshan National Park in Southeast China. The results showed that the concentrations of As, Cd, Pb, Zn and Hg appeared different degrees of pollution compared with their corresponding background values. According to the pollution indices, Hg and Cd were recognized as significant pollutants presenting moderate to high ecological risk. Combining principal component analysis and positive matrix factorization model, the results showed that traffic, industrial, agricultural and natural sources were the potential origins of trace metal(loid)s in this area, with contribution rates of 39.93%, 25.92%, 10.53% and 23.62%, respectively. Non-carcinogenic risks were all negligible, while the carcinogenic risk of As was higher than the limit (1 $\times$ 10⁻⁶). Moreover, children were more susceptible to trace metal(loid)s by ingestion which appeared to be a more important exposure pathway than dermal contact and inhalation. The contribution rates of different sources to non-carcinogenic risks and carcinogenic risks were similar among children and adults, while traffic and industrial sources have a significant impact on health risks. This study will give more insights to control the environmental risks of trace metal(loid)s in national parks.     

羟基多溴联苯醚对鲤鱼急性毒性及定量结构活性关系

羟基多溴联苯醚是一类具有环境风险的新兴污染物,它们已经在众多环境介质甚至人体内广泛存在。参照GB/T13267-91标准方法,采用静态生物急性毒性试验,测定了6种羟基多溴联苯醚(2′-OH-BDE7、4′-OH-BDE17、2′-OH-BDE28、2′-OH-BDE68、4′-OH-BDE90和2′-OH-BDE123)对普通鲤鱼的急性毒性96 h-LC50值,分别为697、1 130、854、550、644和522 ng.mL-1。除4′-OH-BDE17为高毒物质外,其他5种OH-PBDEs均为剧毒物质,高溴代的2′-OH-BDE123毒性最大。选用OH-PBDEs的KOW参数及由MOPAC软件PM3算法计算出的16个量子化学参数(EHomo、qBr+、ELumo等)为描述符,运用一元线性回归分析分别研究了96 h-LC50与他们之间的相关关系。结果表明:lgKOW和ELumo与6种羟基多溴联苯醚的96 h-lg LC50表现出较好的相关性,复相关系数均大于0.96,根据方程得到的96 h-lg LC50预测值与实验值基本相同,进一步对环境中广泛检出的其它OH-PBDEs的96 h-LC50值也进行了预测。     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures (24, 28 and 32°C). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide (DMS), dimethyl trisulfide (DMTS), 2-methylisoborneol, geosmin (GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa (first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa (after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

大豆过敏原P34蛋白基因检测技术与环境污染的关系研究

环境污染易引起大豆种植区域出现过敏原P34蛋白基因变异情况,当前蛋白基因检测方法不能满足检测需求,提出基于探针引物的大豆过敏原P34蛋白基因荧光PCR定量检测技术,针对大豆过敏原特异性基因P34蛋白基因序列进行设计;通过DNA提取、浓度测定,荧光定量PCR检测,实现大豆过敏原P34蛋白基因检测。实验结果表明,所提方法能够准确检测出包括环境污染区域在内的大豆食品过敏原P34蛋白基因成分,具有很好的应用前景,满足市场监督检测的需要。     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

Regeneration of commercial selective catalyst reduction catalysts deactivated by Pb and other inorganic elements

The regeneration of commercial SCR(Selective Catalyst Reduction) catalysts deactivated by Pb and other elements was studied.The deactivated catalyst samples were prepared by chemical impregnation with mixed solution containing K_2SO_4,Na_2SO_4,CaSO_4,Pb(NO_3)_2and NH_4H_2PO_4.A novel method combining Ethylenediaminetetraacetic acid disodium salt(EDTA-2Na) and H_2SO_4solution(viz.catalysts treated by dilute EDTA-2Na and H_2SO_4 solution in sequence) was used to recover the activity of deactivated samples,and the effect was compared with single H_2SO_4,oxalic acid,acetic acid,EDTA or HNO_3 solutions.The surface structure,acidity and reducibility of samples were characterized by N_2adsorption–desorption,inductively coupled plasma optical emission spectrometer(ICP-OES),scanning electron microscopy(SEM),X-ray diffraction(XRD),X-ray fluorescence(XRF),H-2-temperature programmed section(H_2-TPR),NH3-temperature programmed desorption(NH3-TPD) and in situ DRIFTS.Impurities caused a decrease of specific surface area and surface reducibility,as well as Br?nsted acid sites,and therefore led to severe deactivation of the SCR catalyst.The use of an acid solution alone possibly eliminated the impurities on the deactivated catalyst to some extent,and also increased the specific surface area and Br?nsted acid sites and promoted the surface reducibility,thus recovered the activity partially.The combination of EDTA-2Na and H_2SO_4 could remove most of the impurities and improve the activity significantly.The removal of Pb should be an important factor for regeneration.Due to a high removal rate for Pb and other impurities,the combination of EDTA-2Na and H_2SO_4 solutions provided the best efficiency.