唐山排污权交易模式浅析

对开展排污权交易的目的、意义、关键因素进行了分析,对唐山排污权交易的工作进程以及交易指标、交易主体、交易程序、指导价格、申购数量、交易范围、优先及限制条件等模式特点进行了阐述,以期为同类型城市开展排污权交易提供参考。     

Influence of biochar on nitrogen fractions in a coastal plain soil

Interest in the use of biochar from pyrolysis of biomass to sequester C and improve soil productivity has increased; however, variability in physical and chemical characteristics raises concerns about effects on soil processes. Of particular concern is the effect of biochar on soil N dynamics. The effect of biochar on N dynamics was evaluated in a Norfolk loamy sand with and without NHNO. High-temperature (HT) (≥500°C) and low-temperature (LT) (≤400°C) biochars from peanut hull ( L.), pecan shell ( Wangenh. K. Koch), poultry litter (), and switchgrass ( L.) and a fast pyrolysis hardwood biochar (450-600°C) were evaluated. Changes in inorganic, mineralizable, resistant, and recalcitrant N fractions were determined after a 127-d incubation that included four leaching events. After 127 d, little evidence of increased inorganic N retention was found for any biochar treatments. The mineralizable N fraction did not increase, indicating that biochar addition did not stimulate microbial biomass. Decreases in the resistant N fraction were associated with the high pH and high ash biochars. Unidentified losses of N were observed with HT pecan shell, HT peanut hull, and HT and LT poultry litter biochars that had high pH and ash contents. Volatilization of N as NH in the presence of these biochars was confirmed in a separate short-term laboratory experiment. The observed responses to different biochars illustrate the need to characterize biochar quality and match it to soil type and land use.     

上海市奉贤区O3污染特征与影响分析

于2014-2019年,对上海市奉贤区4个环境空气自动监测站的臭氧(O3)污染特征及其影响因素监测数据进行了统计分析.结果表明,O3质量浓度年均值大体平稳且略呈下降趋势,O3日8 h质量浓度中位值和最大值呈现逐步上升趋势,O3质量浓度的最高点和次高点均出现在4-10月.气温与O3质量浓度呈显著正相关关系;随着风速和湿度...     

维生素和酮苷生产废水中难降解污染物的溯源研究

研究了维生素和酮苷生产过程中各生产工段排水的生物降解特性,评价了各生产工段对生产废水中难降解有机物的贡献率,追溯了可能的难降解特征污染物。结果表明,维生素生产废水中的难降解物质主要来自W1-1、W1-3、W1-5和W1-6生产工段,甲醛、丁烯酮、醛酮聚合物和吡啶可能是导致生产废水难降解的重要原因;酮苷生产废水中的难降解物质主要来自W2-1、W2-3和W2-7生产工段,氯代有机溶剂和苯环类物质可能是导致生产废水难降解的重要原因。建议根据具体生产工段排水的水质特征,有针对性地进行物化处理,提高废水可生化性。     

Sulfamethoxazole sorption by sediment fractions in comparison to pyrene and bisphenol A

The environmental behavior of antibiotics has attracted great research attention. However, their sorption mechanisms in soils/sediments are still unknown. Comparison of the sorption properties between the widely-studied hydrophobic organic contaminants (HOCs) and antibiotics may provide valuable insight to antibiotic sorption mechanisms. Thus, in this study batch experiments for pyrene (PYR), bisphenol A (BPA), and sulfamethoxazole (SMX) sorption were conducted on a sediment sample and its separated fractions. Our results showed the high sorption of PYR on black carbon and organic matter. Although high sorption of SMX was observed for both separated organic fractions (humic acids) and inorganic mineral particles, the original sediment particles showed relatively low sorption. Competitive sorption between SMX and dissolved humic acid on mineral particles was observed in this study. This competitive interaction is a unique process for antibiotic sorption in soils/sediments compared with apolar HOCs and may be one of the important factors controlling the antibiotic sorption.     

高燃速推进剂成型过程中的安全性分析

为研究高燃速推进剂成型过程中的安全性,根据配方组成和工艺条件,对其压伸过程的热点形成因素进行了理论分析,并采用热-结构耦合方法,选择有限元软件ABAQUS对其不同工艺条件下的压伸过程进行了建模分析。结果表明:在压伸过程中,物料在收缩段承受的压力最大,且温度变化显著。物料中残留的气泡是影响高燃速推进剂压伸成型过程安全性的主要因素。当物料中有残留气泡时,随压伸过程所加的载荷不同,气泡的最高温度会显著上升,载荷为15MPa时,气泡的最高温度可达139.3℃;载荷为20 MPa时,温度可达264.2℃。     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Impacts of emissions and meteorological changes on China’s ozone pollution in the warm seasons of 2013 and 2017

O₃ increment is mainly caused by changes in meteorology rather than emissions. Emission reduction is effective to reduce O₃ nationwide, especially in summer. Strengthened NO_x controls are necessary to meet the ambient O₃ standard. We have quantified the impacts of anthropogenic emissions reductions caused by the Air Pollution Control Action Plan and changes in meteorological fields between 2013 and 2017 on the warm-season O₃ concentration in China using a regional 3D chemical transport model. We found that the impact on daily maximum eight-hour (MDA8) O₃ concentration by the meteorological variation that mostly increased O₃ was greater than that from emission reduction, which decreased O₃. Specifically, the control measures implemented since 2013 in China have reduced SO₂, NO_x, PM_2.5, and VOC emissions by 33%, 25%, 30%, and 4% in 2017, while NH₃ emissions have increased by 7%. The changes in anthropogenic emissions lowered MDA8 O₃ by 0.4–3.7 ppb (0.8%–7.6%, varying by region and month), although MDA8 O₃ was increased slightly in some urban areas (i.e. North China) at the beginning/end of warm seasons. Relative to 2013, the average 2 m temperature in 2017 shows increments in North, North-east, East, and South China (0.34℃–0.83℃) and decreases in Central China (0.24℃). The average solar radiation shows increments in North, North-east, and South China (7.0–9.7 w/m²) and decreases in Central, South-west, and North-west China (4.7–10.3 w/m²). The meteorological differences significantly change MDA8 O₃ by -3.5–8.5 ppb (-8.2%–18.8%) with large temporal variations. The average MDA8 O₃ was slightly increased in North, North-east, East, and South China. The response surface model suggests that the O₃ formation regime transfers from NO_x-saturated in April to NO_x-limited in July on average in China.     

高效厌氧产甲烷颗粒污泥中微生物多样性及定量化研究

以小试高效厌氧反应器不同运行阶段的颗粒污泥为对象,利用变性梯度凝胶电泳(DGGE)、荧光原位杂交(FISH)和实时定量链式聚合酶反应(RTQ-PCR)等技术研究了其中微生物种群的多样性、特征微生物的空间分布和定量关系,结果表明:随着反应器有机负荷逐渐提高,颗粒污泥中古菌的群落结构的变化较细菌更为明显;细菌多分布在颗粒外层,而古菌则主要分布在颗粒内层;古菌含量略少于细菌,但有逐渐增多的趋势;产甲烷丝菌在古菌中的含量增加明显.