滴水湖及其环湖水系沉积物、土壤中多氯联苯的空间分布特征及风险评价

为了解城市人工湖泊中多氯联苯(PCBs)的污染状况,利用GC/MS技术测定了滴水湖及其环湖水系沉积物、土壤中14种PCBs的含量,并对其分布特征、来源和生态风险进行了探讨与分析.结果表明,滴水湖及其环湖水系沉积物、周边农田土壤中Σ_(14)PCBs含量分别为0.65~16.41 ng·g~(-1)(以干重计)和0.47~1.27 ng·g~(-1),总体处于较低污染水平.但环湖水系表层沉积物高于湖区表层及柱样沉积物中PCBs含量,引水过程可能会对湖区造成污染.湖区沉积物中PCBs随深度增加而降低,表明自成湖以来湖区沉积物中PCBs有污染加剧的趋势.研究区沉积物、土壤中PCBs均以四氯联苯(Tetra-CBs)和五氯联苯(Penta-CBs)为主,分别占Σ_(14)PCBs的20.65%和67.12%,主要特征单体为PCB105、PCB118和PCB77.主成分分析(PCA)结果表明,PCBs主要来源于国产2号、1号PCB产品的使用残留、城市固废焚烧及煤、木材的燃烧排放.研究区沉积物及土壤中12种类二噁英类多氯联苯(DL-PCBs)的毒性当量浓度(TEQs)为0.01~79.40 pg·g~(-1),其中环湖水系及湖区表层沉积物有7个样点中DL-PCBs-TEQs超过了美国EPA沉积物质量指导值(ISQGs),可能对水生生物产生毒性影响,应当引起重视.     

京津冀地区主要排放源减排对PM2.5污染改善贡献评估

研究选取2012年1月和7月作为冬夏两季代表时段,利用CMAQ/2D-VBS模型分析了冬夏两季京津冀地区主要排放源减排30%对改善区域PM_(2.5)污染的效果.结果表明,工业源对PM_(2.5)污染的贡献最大,其次是民用源,但工业源单位减排量贡献低于民用源,交通源和电厂源的整体贡献和单位减排量贡献均较小.工业部门内贡献最大的为钢铁冶金行业,其次是水泥、工业锅炉、炼焦、石灰砖瓦和化工行业.与各部门各物种排放量的比较反映出各排放源贡献大小与其一次PM_(2.5)排放水平高度相关.因京津冀地区冬季NO_x减排对PM_(2.5)形成的促进作用,以及冬季较弱的大气垂直扩散作用,各排放源夏季减排比冬季普遍更有效,交通源、电厂源以及工业源中的水泥、工业锅炉和石灰砖瓦行业夏季减排效果相比冬季优势明显.民用源由于采暖季排放较高而冬季贡献更明显,农业源因秸秆开放燃烧量大,冬季单位减排量贡献十分显著.从同等幅度减排考虑,应将工业源作为控制重点,优先控制其一次PM_(2.5)排放,在部门内进一步重点控制钢铁冶金行业的NO_x和SO_2排放、水泥行业的夏季NO_x排放以及炼焦行业的SO_2和NMVOC排放.民用源排放应着重在冬季采暖期控制.     

巯基硅烷改性多壁碳纳米管的合成及其对Cd2+的吸附性能研究

利用3-巯丙基三甲氧基硅烷(MPTMS)作硅烷偶联剂对多壁碳纳米管(MWCNTs)进行改性,制备巯基硅烷改性多壁碳纳米管(SHMWCNTs),并进行了SH-MWCNTs对Cd~(2+)的批量吸附实验.同时,利用扫描电镜(SEM)、X射线光子能量仪(EDS)、红外光谱(FT-IR)对SHMWCNTs进行表征,探究了溶液初始pH、吸附剂投加量、吸附时间、溶液初始Cd~(2+)浓度等因素对吸附效果的影响,分析了吸附动力学特征及吸附等温线特征,初步探讨了吸附机理.SEM、EDS与FT-IR图谱显示,MPTMS已成功接枝到MWCNTs表面,表明SH-MWCNTs制备成功.吸附时间为90 min,pH为4时的吸附效果最佳,吸附量随SH-MWCNTs投加量、Cd~(2+)浓度的增加而增大.吸附动力学和吸附等温线研究表明,SHMWCNTs对Cd~(2+)的吸附动力学符合准二级线性方程,吸附等温线符合Freundlich、Langmuir 2种模型,吸附以单分子层吸附为主,也存在层间扩散的多层吸附.     

速生树种竹柳对复合污染土壤中镉和锌的吸收、积累与生理响应特性

为探讨竹柳在重金属复合污染(镉、锌)土壤中生长的生理变化及重金属在植株内的转移情况,以竹柳(Salix sp.)三号及竹柳五号为试验材料,以重金属复合污染的水稻土为供试土壤,通过盆栽试验研究了重金属对竹柳生理指标、重金属吸收与积累量、富集系数(BCF)和转运系数(TF)的影响.结果表明:竹柳各器官重金属含量和转移情况不同,其中,叶片中Cd、Zn含量最高,分别达61.4和1940 mg·kg~(-1);竹柳三号对Zn的转运能力大于竹柳五号,而竹柳五号的净光合速率更高;生长100 d后,重金属在竹柳叶片中的积累量和转移系数均高于其他部位,竹柳吸收的重金属主要分布在叶片中,可通过集中处理叶片达到去除土壤中重金属污染的目的.     

淮南深部山西组煤中汞的含量分布及赋存特征研究

以淮南煤田深部山西组煤为研究对象,分别采集研究区张集煤矿和新集二矿二叠系山西组1煤层的煤样品,测试了样品中总汞的含量,分析汞的空间分布特征,采用浮沉实验、逐级化学提取实验以及相关性分析研究了煤中汞的赋存状态,并结合沉积环境探讨了深部山西组煤中汞的富集成因.结果 表明:(1)研究区煤样中汞含量介于0.03～0.93 μg...     

Sorption of phenanthrene by dissolved organic matter and its complex with aluminum oxide nanoparticles

Intent of this study was to explore the potential application of polymerin, the polymeric, dissolved organic matter fraction from olive oil wastewaters, in technologies aimed at remediating hydrophobic organic compounds (HOCs) point-source pollution. Phenanthrene binding with polymerin was investigated. Moreover, the effect of addition of micro and nanoscale aluminum oxides (Al₂O₃) was studied, as well as sorption of polymerin on the oxides. Phenanthrene binding capacity by polymerin was notably higher than the sorption capacities for both types of Al₂O₃ particles. Polymerin sorption on nanoparticles was nearly 100 times higher than microparticles. In a three-phase system, using microparticles, higher phenanthrene sorption was found by adding into water polymerin, oxides and phenanthrene simultaneously. In contrast, using nanoparticles, a considerable enhancement of phenanthrene sorption was shown by adding phenanthrene to a pre-formed and dried polymerin-oxide complex. These findings support the application of polymerin, especially associated with Al₂O₃ nanoparticles, in remediation of water contaminated with HOCs. This work highlights the significant role of nanoparticles.     

电动力学技术修复苯酚污染土壤的研究

用电动力学技术对苯酚污染砂土的修复进行了实验研究.探讨了苯酚污染砂土电动力学修复的可行性及在不同电场强度下苯酚的迁移特征和机制.研究了采用添加阴离子表面活性剂十二烷基苯磺酸钠(LAS)和控制液(柠檬酸和NaOH)等对迁移效果的影响,以及苯酚在砂土中的迁移和分布规律.实验结果表明,在电场作用下苯酚在砂土中发生富集.在电场强度为2.0V/cm时的苯酚富集效果明显,比在电场强度为0.5 V/cm时苯酚多增加30%,且向阳极的迁移距离增大了12 cm;在阴极添加不同浓度的LAS,苯酚在砂土中的富集效果不同,LAS浓度越大向阳极迁移得越快富集效果越明显,当LAS为0.046 0 mol/L时苯酚最高增加了143%;向阳极添加NaOH,苯酚在阳极区增加了136%,比向阴极添加柠檬酸的效果明显.     

Sorption of organic contaminants by biopolymers: role of polarity, structure and domain spatial arrangement

Sorption behavior of hydrophobic organic contaminants (HOCs) (i.e., pyrene, phenanthrene and naphthalene) by native and chemically modified biopolymers (lignin, chitin and cellulose) was examined. Lignins (native and treated) showed nonlinear sorption for all compounds studied, emphasizing their glassy character. Chitins and celluloses had linear isotherms for phenanthrene and naphthalene, illustrating the dominance of partitioning, while pyrene yielded nonlinear isotherms. Sorption capacity (K(oc)) of HOCs was negatively correlated with the polarity [(O+N)/C] of the biopolymers. Aromatic and alkyl+aromatic C percentages, rather than alkyl C content, demonstrated a better correlation with K(oc) values, indicating the importance of aromatic structures for HOC affinity. Hydrophobicity (K(ow))-normalized K(oc) values decreased sharply with increasing percentage of O-alkyl C versus total aliphatic C (O-alkyl C/total aliphatic C) or with polar C/(alkyl+aromatic C) ratio of the biopolymers until their values reached 80% and 4, respectively, illustrating the effect of surrounding polar groups on reducing affinity for HOCs. Overall, the results of this study highlight the role of spatial arrangement of domains within biopolymers in sorption of HOCs, and point to sorbent properties, such as functionality, polarity and structure, jointly regulating the sorption of HOCs in biopolymers.     

苯酚、苯胺及其衍生物对斜生栅列藻的急性毒性及QSAR研究

本文应用ＯＥＣＤ标准方法测定了１８种酚类胺类化合物对斜生栅列藻的４８ｈ－ＥＣ６０值,选择参数ＥＬＵＭＯ和ｌｇＫｏｗ进行了ＱＳＡＲ分析,得到下列回归方程：－１ｇＥＣ５０＝２．５４１－０．６４９ＥＬＵＭＯ＋０．２９９ＬｇＫｏｗ,ｎ＝１８,ｒ＝０．９０３,ＳＥ＝０．３１４应用所得方程计算了化合物的毒性,探讨了毒机理。     

Efficient degradation of rhodamine B using modified graphite felt gas diffusion electrode by electro-Fenton process

The electro-Fenton (EF) process treatment of 0.1-M (rhodamine B) RhB solution was studied with different graphite cathode materials, and graphite felt (GF) was selected as a promising material in further investigation. Then, the degradation performances of gas diffusion electrode (GDE) and graphite felt (GF) were compared, and GDE was confirmed to be more efficient in RhB removal. The operational parameters such as Fe²⁺ dosage and current density were optimized, and comparison among different modified methods—polytetrafluoroethylene-carbon black (PTFE-CB), polytetrafluoroethylene-carbon nanotube (PTFE-CNT), electrodeposition-CB, and electrodeposition-CNT—showed 98.49 % RhB removal by PTFE-CB-modified cathode in 0.05 M Na₂SO₄ at a current density of 50 A/m² and an air flow rate of 1 L/min after 20 min. Meanwhile, after cathode modified by PTFE-CB, the mineralization efficiency and mineralization current efficiency performed absolutely better than the pristine one. Cyclic voltammograms, SEM images, contact angles, and BET surface area were carried out to demonstrate stronger current responses and higher hydrophilicity of GF after modified. The value of biochemical oxygen demand/chemical oxygen demand (BOD₅/COD) increased from 0.049 to 0.331 after 90-min treatment, suggesting the solution was biodegradable, and the modified cathode was confirmed to be stable after ten circle runs. Finally, a proposed degradation pathway of RhB was put forward.