嘉兴地区农村生活污水时空分布及处理设施现状分析

研究选取嘉兴市下辖农村的160座生活污水处理设施进出水为研究对象,分析了区域农村生活污水污染物时空分布特征及其处理设施现状,以期提高处理设施效率。结果表明:嘉兴市农村生活污水中氮、磷污染较有机污染更严重,ρ（COD）、ρ（TP）、ρ（TN）、ρ（NH₄+-N）年均值分别为142.23,4.02,44.19,27.74 mg/L,各污水处理设施处理效果有很大优化空间,COD、TP、TN、NH₄+-N年均去除率分别为50.5%、29.7%、36.8%、51.7%。农村生活污水空间上呈自西向东、由北至南逐渐减小的分布特征,时间上表现为冬季 > 春季 > 秋季 > 夏季。相关性分析表明,COD、TP、TN、NH₄+-N之间呈极显著正相关（P<0.01）,相关系数为0.688±0.946。设施进水C/N、NH₄+-N/TN年均值分别为3.21、68.9%,传统的单一A2/O处理工艺对低碳源污水处理效果不理想,可通过组合工艺设计、规范运营管理、加强后期监测等有效措施来进一步加强污水处理设施处理效果。     

洞庭湖近30年水环境演变态势及影响因素研究

水量、泥沙和污染物交换作为河流与湖泊之间的关键过程,对湖泊生态环境演变具有复杂而深远的影响.以长江中游典型通江湖泊洞庭湖为研究对象,着眼于“江湖”“河湖”“人湖”三重作用关系变化,从水文情势、水质、富营养化3个层面剖析了近30年洞庭湖水环境演变态势及主控因素.结果表明:①“江湖”关系变化影响了洞庭湖水沙交换及其年内分配,是湖泊枯水期提前和延长、水沙关系突变等现象的主控因素;“河湖”“人湖”关系变化协同加剧了该现象.②“河湖”关系的失衡和“河湖”统筹管理措施缺位,造成入湖河流长期输送大量营养物质,是湖体氮磷污染较重的根源;“江湖”“人湖”关系变化协同影响着营养盐分布格局,但影响范围及程度有限.③在“江湖”“河湖”作用关系复合影响下,藻类生长条件更为有利,增加了洞庭湖富营养化及水华风险.为保障洞庭湖水环境安全,建议:针对“江湖”作用主导的低枯水位问题,以水资源调控为核心,推进长江与流域上游水库联合生态调度,保障湖泊生态流量;针对“河湖”作用主导的水质恶化问题,以水污染防治为核心,强化流域污染控制,统筹“河湖”一体化监测管理模式,保障湖泊水环境质量;对于“人湖”作用主导的生态破坏问题,以生态空间管控为核心,划定并坚守生态红线,保障生态空间.      

基于最大熵模型的福建省红树林潜在适生区评估

本研究利用生物气候、地形、底质类型、海温等环境因子和红树林分布数据建立了福建省红树林分布模型,基于最大熵方法分析了福建省沿岸红树林潜在适生区的空间分布.根据模型输出结果对福建省红树林的生境适宜性进行了评估,识别了影响红树林分布的关键环境因子及其适生值区间,并通过空间叠加分析获取了福建省红树林保护与修复的优先区与空缺区域.结果表明,影响福建省红树林适生区分布格局的主要环境因子包括海表温度、气温和降水等,福建省红树林潜在适生区主要位于沙埕港-三沙湾-兴化湾沿岸、泉州湾-厦门湾-九龙江口沿岸、漳江口-东山湾沿岸等地,其中最优适生区面积约为91km².全省共识别出8处红树林保护与修复的优先区域,现存红树林保护率约为64.4%,保护修复空缺主要出现在沙埕港、三沙湾、罗源湾、福清湾等处,研究结论可为未来福建省红树林保护和修复行动提供科学参考.     

全球海洋初级生产力与海洋环境要素时空关联模式挖掘分析

全球海洋初级生产力在海洋环境要素的驱动下呈现不同的时空分布特征,但在不同的海域两者之间的关联模式并不清晰。本文从地理时空规则挖掘的角度,利用1998年1月—2016年12月之间的序列多源遥感产品数据,探讨了全球海洋初级生产力和海洋表面温度、海面高度异常、海面降雨、混合层深度和ENSO（El Ni?o-Southern Oscillation）事件的时空关联模式。研究结果表明:1）在西赤道太平洋,海面高度异常降低、海面降雨异常降低和混合层深度异常升高会提升真光层营养盐供应,致使海洋初级生产力的异常升高。2）在中赤道太平洋,海面高度异常升高、海面降雨异常升高和混合层深度异常降低会抑制真光层营养盐供应,致使海洋初级生产力的异常降低。3）在东赤道太平洋,海面高度异常升高和海面降雨异常升高会抑制真光层营养盐供应、混合层深度异常升高降低了铁元素含量,从而导致海洋初级生产力的异常降低。4）在南太平洋,浮游植物丰度与营养盐呈负相关,海洋表面温度异常升高/异常降低会提升/抑制微生物光合作用效率、海面高度的异常升高/异常降低会抑制/提升真光层营养盐供应,致使海洋初级生产力的异常升高/异常降低。5）厄尔尼诺事件相较于拉尼娜事件更容易引起海洋初级生产力的异常变化。     

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Mitigation and Adaptation Strategies for Global Change - Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global...     

Optimal range of plug-in electric vehicles in Beijing and Shanghai

Both China’s national subsidy policies for plug-in electric vehicles (PEVs) purchasers and passenger cars corporate average fuel consumption and new vehicle credit regulation (dual-credit policy) favor long-range 300+ km battery electric vehicles (BEVs) and 80+ km plug-in hybrid electric vehicles (PHEVs). However, these electric vehicles tend to have lower energy efficiency and higher purchase and operation costs. Vehicle with larger batteries can also be less equitable because the subsidies are often provided to more expensive vehicles and wealthier owners. This study takes advantage of a novel dataset of daily driving data from 39,854 conventional gasoline vehicles in Beijing and 4999 PHEVs in Shanghai to determine the optimal range of BEVs and PHEVs within their respective cities. We simulate a model to explore ranges with which PEVs emit less GHGs than that of a baseline hybrid and conventional gasoline vehicle while ensuring that all daily travel demands are met. Our findings indicate that in both cities, the optimal ranges to balance cost and travel demand for BEVs are 350 km or less and for PHEVs are 60 km or less in Beijing and 80 km or less in Shanghai. We also find that to minimize carbon dioxide (CO₂) emissions, the ranges are even lower 10 km in Beijing and 30 km in Shanghai. Our study suggests that instead of encouraging long-range PEVs, governments should subsidize PEV models with shorter ranges. Parallel efforts should also be made to both increase renewable energy over fossil fuels and expand charging facilities. Although individual mobility demand varies, the government could reduce occasional long-distance driving by subsidizing alternative transportation choices. Providing week-long driving trials to consumers before their purchases may help decrease the demand of very long range PEVs by alleviating the range anxiety through a learning process.

     

水解酸化-MBR组合工艺处理雏鸡孵化场废水

文章介绍了采用水解酸化-MBR组合工艺处理雏鸡孵化场废水的应用实例。结果表明,当进水COD、BOD5、NH3-N和SS浓度分别为1 230、268、22和456 mg/L时,污染物去除率依次分别为96.7%、97.5%、82.7%和98.6%。经该工艺处理后的出水水质稳定,并达到了《城镇污水处理厂污染物排放标准(GB 18918—2002)》一级A标准。     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Long-term effects of sliver nanoparticles on the abundance and activity of soil microbiome

正Silver nanoparticles(Ag NPs)are among the most extensively used engineered nanomaterials because of their wellestablished antimicrobial and unique physicochemical properties(Yin et al.,2015).Applications of AgNPs have now been