Combined glassification of EAF dust and incinerator fly ash

Stainless steelmaking dust contains large amount of heavy metals, such as Cr and Ni. If these hazardous materials are not treated properly, they will cause detrimental secondary contamination. Preliminary study on recycling stainless steelmaking dust employed the thermal molten technology. Glass-ceramics were formed by combination stainless steel dust and incinerator fly ash with the ratio of 1:9. The major phases were Augite, Akermanite, and Donathite. It was found that the glass-ceramics shows the best characteristic at 900 degrees C after 5 h of heat treatment. This product can be used as building materials or refractory materials.     

Characteristics of aerosols collected in central Taiwan during an Asian dust event in spring 2000

Aerosol samples for PM(2.5) and PM(2.5-10) were collected at four locations in central Taiwan from 26 to 31 March 2000, a period that experienced exceedingly high PM levels from 29 to 30 March due to the passage of an Asian dust storm. The samples were analyzed for mass, metallic elements, ions, and carbon. The purpose of this paper is to investigate the influence of the dust storm on the characteristics of local ambient particulate matter. The results indicate that the concentrations of the crustal elements Ca, Mg, Al, Fe and the sea salt species Na+ and Cl- in PM(2.5-10) during the dust episode exceed the mean concentrations in the non-dust period by factors of 3.1, 2.9, 2.6, 2.2, 2.3 and 2.1 respectively. Enrichment factors of Ca, Fe, and Mg in PM(2.5-10) during the dust event are close to unity, indicating that these elements are from soil. Reconstruction of aerosol compositions revealed that soil of coarse particulates elevated approximately 50% in the dust event. It is noted that during the dust event, the ratio of Mg/Al in PM(2.5-10) ranged from 0.21 to 0.25 while that of Ca/Al ranged from 0.6 to 0.9, levels more constant than those obtained in non-dust period.     

Determination of atmospheric nitrate particulate size distribution and dry deposition velocity for three distinct areas

In this study, both atmospheric particulates and dry deposited particulates were collected at a highway intersection, coastal location and suburban area in Taichung, Taiwan for the characterization of nitrate containing particulates (NCPs) in size distribution and dynamic properties. Collected particulates were placed in contact with nitron (C20H16N4) to form distinctive products of NCPs, which were examined by a SEM. For total atmospheric particulates, the sum of NCP and non-nitrate containing particulate (NNCP), the average shape factor values are 1.69, 1.49, and 1.36 for the highway intersection, coastal area and suburban area, respectively. The calculated shape factors show no significant differences with sizes. Dry deposition fluxes and atmospheric concentrations at various size ranges were estimated. The mass distributed in fine particle range (相似文献   

Optimizing electron spin resonance detection of hydroxyl radical in water

The parameters affecting the electron spin resonance (ESR) detection of hydroxyl free radical in water are studied and optimized. The hydroxyl radical is generated by the Fenton reaction with iron (II) ammonium sulfate and hydrogen peroxide reacting in a phosphate buffer using N-tert-butyl-alpha-phenylnitron as the spin trap. The concentrations of Fe²⁺, H₂O₂, and phosphate buffer are the parameters studied. The Taguchi method and the orthogonal experiment design were used to evaluate the effects of these parameters on the ESR signal intensity. By the analysis of the signal-to-noise ratio and the analysis of variance, the order of importance of the various parameters on the hydroxyl radical formation is determined for optimal ESR detection of hydroxyl radical. The results will help the development of water purification technologies using hydroxyl free radical as a green oxidant.     

水处理工艺去除藻毒素的效果探讨

探讨了饮用水处理的各工艺过程对藻毒素的去除作用,并根据前期已进行的实验对各工艺的优化组合进行了讨论,认为以气浮代替沉淀,并附之以粉末活性炭吸附预处理可有效地去除藻毒素;对没有条件改造沉淀池的水厂可暂时采用预氯化和粉末活性炭吸附组合的工艺也可达到较好的效果;对生物预处理工艺进行适当的强化,可达到对有机物、藻类、藻毒素等物质的有效去除.     

固相微萃取气相色谱法测定水样中的苯胺、吡啶

应用PDMS/DVB固相微萃取探头,结合GC/FID测定水中的苯胺、吡啶.优化了萃取温度、萃取平衡时间、pH等条件.该方法对苯胺和吡啶的检测限分别为0.050、0.065 mg/L,相对标准偏差6.44%～8.67%,具有快速、准确和方便等优点.     

建筑陶瓷行业SO2污染物评价及总量控制实用方法

采用高斯点源模型对建陶生产造成的SO2地面浓度增量进行计算.利用比例下降模型计算建陶业的SO2允许排放总量,并根据企业的设备生产能力进行了总量分配,在方法上具有较强的可操作性,计算结果表明,可有效降低所在地区的SO2地面浓度.     

模糊神经网络控制在污水处理中的应用研究

对模糊神经网络(FNN)技术应用于污水处理进行了研究,提出了一个具有五层的模糊神经网络控制器,仿真实验表明,该控制系统具有很强的鲁棒性与容错性.该控制器能够自动调整隶属度函数、动态优化控制规则,将其应用于溶解氧控制和出水水质预测,结果表明可以快速、有效地使溶解氧浓度达到期望值,实际出水水质预测结果也具有很好的收敛性和预测精度.     

垃圾填埋场渗滤液处理工艺研究进展

介绍了垃圾渗滤液的来源和特点，结合近些年的工程实际和实验研究，主要综述了垃圾渗滤液的处理方案和技术，包括回灌法、土地处理法、物化法、生物法以及其他处理方法，在比较这些方法的基础上提出了一些建议。