孔径对微孔曝气充氧性能的影响

孔径是微孔曝气产品最重要的参数之一,研究孔径对微孔曝气氧传质的影响对于提高微孔曝气器充氧性能有重要意义。本研究在1.5 m水深条件下对不同大小孔径的钟罩型塑料微孔曝气器充氧性能进行评价。结果发现,在实验条件下,微孔曝气器的阻力损失RL、标准氧总转移系数KLas、标准氧转移速率SOTR,标准氧转移效率SOTE及理论动力效率E随孔径增大而显著减小。     

Characteristic Study of Ambient Air Total Gaseous Mercury (TGM) Concentrations During Rainy and Non-Rainy Periods at a Traffic Site in Taiwan

This investigation studied the concentrations of ambient air total gaseous mercury (TGM) during the rainy periods at the Hung-Kuang traffic sampling site in central Taiwan from May 26 to June 16, 2014. The results were compared with those of a previous study for ambient air TGM during non-rainy daytime and nighttime periods at the Hung-Kuang traffic sampling site, which was conducted during March 21 to July 20, 2012. The observed mean concentration of ambient air TGM was 1.16 ng/m³ during the rainy periods at the Hung-Kuang traffic sampling site. The mean ambient air TGM concentrations were higher in the non-rainy sampling period in daytime than in the rainy sampling period from this study. The mean ratio of non-rainy sampling period in daytime to that of rainy sampling period for ambient air TGM were 3.15. Furthermore, the mean ambient air TGM concentrations were higher in the non-rainy sampling period in nighttime in than in the rainy sampling period for this study. The mean rations for non-rainy sampling period in nighttime to that of the rainy sampling period for ambient air TGM were 2.70. The results obtained in this study also revealed that the ambient air TGM concentrations during the rainy period had the lowest concentrations when compared with the other sampling sites in other world regions.     

汽车电气和电子部件的环境试验总体要求与可靠性研究

本文针对3.5 t以下汽车电气和电子部件,采用ISO 16750系列标准和多个主流整车企业近年来实际使用的供货规范中关于环境试验与可靠性的要求,对于车辆中不同电子电气部件的环境试验序列与方案的设置、试验中和试验后的参数验证测试进行了详细解析。     

汽车电气和电子部件环境可靠性与关键试验解析

本文针对3.5 t以下汽车电气和电子部件,基于ISO 16750和IEC 60068-2系列标准中的专业基础性试验及方法,重点阐述了主流整车企业使用的供货规范VW 80000最新版中关于环境可靠性试验的增补和变更项目,对于汽车部件环境试验中3个关键试验项目:密封性试验、冷却回路压力脉动试验、冷凝与气候试验,进行了详尽的解析。     

Development of a new polyclonal antibody for the determination of polychlorinated biphenyls in indoor air by ic-ELISA

A new polyclonal antibody (pAb) was prepared and used for the determination of polychlorinated biphenyls (PCBs) in air samples to promote the application of immunoassay technology in the determination of PCBs. Three PCB congeners immunogen mixture was used to stimulate immune responses in rabbits. The specific pAb to PCBs was obtained and used to develop an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA). A standard curve for Aroclor 1248 was prepared using concentrations ranging from 0.1 to 100 μg L^?1. The average IC₅₀ value was 16.21 μg L^?1 and the limit of detection at 10 % inhibition (IC₉₀) was 0.069 μg L^?1. The entire procedure was then evaluated using spiked air samples. The recoveries of Aroclor 1248 at various spiking levels in the air samples ranged from 84 to 113 %, with relative standard deviations of 3 to 6 %. Under optimum conditions, the cross-reactivity profiles of the assays were obtained using three selected congeners, four Aroclor products, and other structurally related compounds of PCBs. The assays were found to be highly specific for PCB congeners and Aroclors 1248 and 1242. The air samples were then analyzed using gas chromatography coupled with high-resolution mass spectrometry to confirm the ic-ELISA results. The attained results demonstrated that the proposed method was an effective and inexpensive technique for the PCBs determination in air samples.     

C60-DOM interactions and effects on C60 apparent solubility: a molecular mechanics and density functional theory study

Dissolved organic matter (DOM) plays a critical role in the transport of carbon nano-particles (e.g. C(60)) in the aquatic environment. However, the mechanism for C(60)-DOM interactions and its environmental implications needs further investigations. In this study, the interaction of C(60) with relevant reference compounds of DOM (DOM(R)) is computationally simulated by molecular mechanics and density functional theory (DFT). All the C(60)-DOM(R) complexes are firstly optimized by classical annealing, and then DFT using the Dmol(3) code. The adsorption energies of C(60) on DOM(R) were computed. The computed electrostatic potential indicates that DOM(R) are electron acceptors in the C(60)-DOM(R) complexes, and the thermodynamic calculations indicate that electrostatic interaction is the dominant driving force for the C(60)-gallic acid complexation process in water. The presence of DOM(R) increases the apparent water solubility of C(60). It is also observed that the C(60) apparent water solubility decrease with the increase of the energy gaps of frontier molecular orbitals (E(LUMO)-E(HOMO)) for each C(60)-DOM(R) complex. These findings indicate that computational simulation is an important tool for predicting the behavior and fate of carbon nano-particles in the aquatic environment.     

汞、铅、铬污染土壤的微生物修复

利用裂褶菌(Schizophyllum commune)GGHN08-116菌株,以棉籽壳、玉米秸等为固体发酵底物修复受汞、铅、铬污染的土壤。通过菌丝穿透重度重金属土壤实验,研究了菌丝在穿透土壤过程对交换态重金属的影响以及该菌株子实体对重金属离子的富集能力,同时,通过盆栽实验研究了在重度重金属污染土壤上,施用不同比例的固体发酵料对污染土壤中汞、铅、铬及其胡萝卜根茎质量、产量的影响,研究结果表明,该菌株能穿透厚度为5 cm的土壤,并有子实体生成,土壤pH值略有下降,与对照差异不显著;与对照相比,土壤中交换态汞、铬含量均显著下降,而交换态铅差异不显著,子实体中除汞含量符合标准外,铅、铬均超出了GB 7096-2003,GB 2762-2005规定标准。在固体发酵料处理下土壤中交换态汞、铅、铬含量均显著下降,胡萝卜根茎中均未检测到汞、铅含量,铬含量也符合GB 2762-2005规定标准。GGHN08-116菌株及其固体发酵产物具有修复受重金属污染土壤的能力。     

废水中KMnO4对生物处理效果的影响

为减轻和消除含高浓度KMnO4的牛仔服加工废水对生物处理系统的毒害作用,采用模拟序批式活性污泥法,研究KMnO4对活性污泥微生物生长的影响及COD和NH4+-N的降解规律。结果表明,当处理进水COD浓度500 mg/L,NH4+-N浓度23.5 mg/L,污泥浓度为2 000 mg/L时,曝气时间为4 h,KMnO4质量浓度增加对COD和NH4+-N的降解影响很大;同样条件下曝气时间改为8 h,对NH4+-N的降解影响显著减小,但对COD的降解影响减少不多;并且,高浓度KMnO4对NH4+-N去除效果的抑制作用比对COD的大。因此,处理含高浓度KMnO4的废水需要延长一倍曝气时间,可以获得良好的COD和NH4+-N的降解效果。同时,KMnO4对活性污泥的抑制影响较好地吻合非竞争性抑制机理修正莫若特方程的规律。     

环保型钻井液的研究应用现状及发展趋势

介绍与分析了现阶段国内外环保型钻井液及其处理剂的特点和研究现状。推荐了钻井液体系环保指标及毒性的评价方法。指出制约中国环保型钻井液技术开发的因素,对环保型钻井液技术研究的重点和发展趋势进行了分析。指出环保型钻井液的发展趋势,强调无毒性硅酸盐钻井液是今后研究的重点。     

Mixing and transformation of Asian dust with pollution in the two dust storms over the northern China in 2006

To study the mixing and transformation of Asian dust with pollution in the two dust storms over the northern China in 2006, both TSP and PM_2.5 samples were collected at three sites of northern China in addition to the dry deposition samples collected in an episode in Beijing. 23 elements, 15 ions, and 16 PAHs in each sample were analyzed. The two dust storms in northern China were observed in April 8–10 (DS1) and April 16–18 (DS2). Compared to DS2, DS1 was weaker and more polluted with stronger mixing between crustal and pollutant aerosols during their long-range transport. The concentrations of pollution species, e.g. pollution elements, ions, and PAHs were higher in DS1 than that in DS2, while the crustal species showed adverse variation. The correlation between chemical species and Al and between PAH(4) and PAH(5,6) further confirmed the stronger chemical transformation and aerosol mixing in DS1 than that in DS2. Back trajectory and chemical analysis revealed that in DS1 the air masses at Beijing were mostly from southern or southwestern direction at lower altitude with much more pollution, while in DS2 the air masses were mostly from the northwestern and northern direction with dust mainly, which explained why there was a stronger mixing of dust with pollution aerosol in DS1 than that in DS2 over Beijing.