Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment

Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).     

Effect of alginate on the aggregation kinetics of copper oxide nanoparticles (CuO NPs): bridging interaction and hetero-aggregation induced by Ca<Superscript>2+</Superscript>

The stability of CuO nanoparticles (NPs) is expected to play a key role in the environmental risk assessment of nanotoxicity in aquatic systems. In this study, the effect of alginate (model polysaccharides) on the stability of CuO NPs in various environmentally relevant ionic strength conditions was investigated by using time-resolved dynamic light scattering. Significant aggregation of CuO NPs was observed in the presence of both monovalent and divalent cations. The critical coagulation concentrations (CCC) were 54.5 and 2.9 mM for NaNO₃ and Ca(NO₃)₂, respectively. The presence of alginate slowed nano-CuO aggregation rates over the entire NaNO₃ concentration range due to the combined electrostatic and steric effect. High concentrations of Ca²⁺ (>6 mM) resulted in stronger adsorption of alginate onto CuO NPs; however, enhanced aggregation of CuO NPs occurred simultaneously under the same conditions. Spectroscopic analysis revealed that the bridging interaction of alginate with Ca²⁺ might be an important mechanism for the enhanced aggregation. Furthermore, significant coagulation of the alginate molecules was observed in solutions of high Ca²⁺ concentrations, indicating a hetero-aggregation mechanism between the alginate-covered CuO NPs and the unabsorbed alginate. These results suggested a different aggregation mechanism of NPs might co-exist in aqueous systems enriched with natural organic matter, which should be taken into consideration in future studies.

Open image in new window

Graphical abstract Hetero-aggregation mechanism of CuO nanoparticles and alginate under high concentration of Ca²⁺

     

APSFZn在富营养化湖泊型水体中的应用

采用复合共聚法制备一种新型无机高分子絮凝剂凹凸棒-聚硅酸铁锌(APSFZn),并应用于富营养化湖泊型原水的实验研究。考察了水体p H、投加量、搅拌强度影响因素对絮凝效果的影响。研究表明,APSFZn具有较宽的p H使用范围。当p H为7.6、投加量为20 mg/L、搅拌强度为快搅速度200 r/min,快搅时间2 min,慢搅速度50 r/min,慢搅时间15 min时,APSFZn絮凝剂对Chl-a、CODMn、TP和TN的去除率分别为91.57%、87.11%、93.48%和48.98%。与传统絮凝剂PAC、PFS、PSFZn对比,APSFZn的絮凝效果明显优于传统絮凝剂。该絮凝剂制备简单、具有良好的稳定性和絮凝特性、工艺无二次污染,将APSFZn应用于富营养化湖泊型原水具有良好的絮凝效果。     

盐效萃取法从电子产品清洗废液中回收异丙醇

用盐效萃取法从电子产品清洗废液中回收片丙醇,考察了碳酸钾水溶液与该清洗废液的质量比对脱水率的影响,测定了异丙醇-水-碳酸钾体系存40℃时的液液相平衡数据,用Pitzer理论和NRTL方程对液液相平衡数据进行了理论计算。结果表明：当质量分数为60．00％的碳酸钾水溶液与该废液的质晕比为2．00时,脱水率高达90．00％;将有机相进行精馏可得到质量分数为99．50％的异丙醇;计算值与实测值接近,水相和有机相的绝对平均偏差分别为0．62％和0．46％。     

尿素基纤维的制备及对水中Cu2+和Cd2+的吸附

以棉纤维为原料,经氯化和取代反应,制得尿素基纤维并用于水中Cu^2＋和Cd^2＋的吸附,考察了各种因素对吸附效果的影响。尿素基纤维对Cu^2＋和Cd^2＋的吸附可用Langmuir等温吸附方程描述,吸附过程可看成单层吸附。较佳吸附条件：重金属离子溶液pH为5,流量为7mL／min。用过的尿素基纤维经2mol／L的盐酸洗脱再生后,对Cu^2＋的吸附、解吸、再吸附的性能良好,可重复使用。     

含碳纳米TiO2光催化降解甲醇

采用管式光催化反应器,在石英玻璃管壁上涂镀含碳纳米TiO2薄膜,研究含碳纳米TiO2对甲醇气体的光催化降解性能。实验结果表明：随气体流量增加,甲醇降解率呈线性降低;在气体流量为200mL／min、相对湿度为40％、甲醇初始质量浓度为90～170mg／m^3的较佳条件下,甲醇降解率维持在80％以上,最高达85％;在甲醇初始质量浓度为150mg／m^3、气体流餐为200mL／min、相对湿度为40％的条件下,德国Degusa—P25光催化剂对甲醇的平均降解率为89％,含碳纳米TiO2对甲醇的平均降解率为82％,最人降解率为85％。     

氧化沟反应器流体力学特性的数值模拟与实验研究

采用CFD数值计算和体视PIV测试相结合的方法研究卡鲁塞尔氧化沟反应器流场特性。探索复杂边界条件下反应器流场的模拟方法,采用体视PIV技术分别测量了反应器直道、弯道处三维全场流速;研究不同位置处纵、横、垂三向的流动结构和沿程分布特点。结果表明,模拟与实验结果较吻合;纵、垂两向的流动分布是决定沟内水力特性的主要因素;横、垂两向的流动是决定污泥沉积位置的主要因数;外沟靠近曝气叶轮直道段的流速分布上大下小,在低速区底部易发生污泥沉积;外沟远离曝气叶轮直道段流速分布上小下大,利于防止泥水分离;弯道段受横比降和横向环流的影响,内侧容易形成低速区或停滞区而发生污泥沉积。     

水环境数学模型与GIS的集成研究

从地理信息系统(GIS)的功能特点、环境信息的特性和水环境数学模型软件应用时存在不足的3个方面分析了GIS和水环境数学模型软件集成的必要性.介绍了GIS和水环境数学模型的集成方式以及苏州河三期综合整治决策支持系统的主要功能结构,重点从GIS和水环境数学模型集成方面介绍了地图矢量化、模型计算结果转化为相应数据库文件、数据库文件和GIS实现绑定以及断面水位动态演示的实现方法和重要作用.     

涡凹气浮(CAF)/SBR法在高寒地区屠宰废水中的应用

采用涡凹气浮(CAF)和序批式活性污泥(SBR)法处理高寒地区屠宰废水,在冬季室温15℃以上培养的活性污泥完全适应该工艺的要求.经该工艺处理后,出水水质可达到国家《污水综合排放标准》(GB 8978-1996)一级标准,COD、BOD5、SS、氨氮和TN去除率分别达到95.3%、96.7%、87.1%、63.3%和60.9%.     

有机固体废弃物的热解处理研究

通过对锯末、稻壳、纸屑、橱芥、塑料和橡胶6种具有代表性的有机固体废弃物原料的热解实验,测量了它们三相产物收率,并分析了它们固体、液体和气体三相产物的组成.特别对液体产物,针对它们的特殊性分别采用了层析、模拟蒸馏和全烃气相色谱分析,详细探讨了热解焦油的具体组分,得到了热解法处理有机固体废弃物的一些有意义的数据.