Optimization of micro-aeration intensity in acidogenic reactor of a two-phase anaerobic digester treating food waste

Micro-aeration is known to promote the activities of hydrolytic exo-enzymes and used as a strategy to improve the hydrolysis of particulate substrate. The effect of different micro-aeration rates, 0, 129, 258, and 387 L-air/kg TS/d (denoted as LBR-AN, LBR-6h, LBR-3h and LBR-2h, respectively) on the solubilization of food waste was evaluated at 35 °C in four leach bed reactors (LBR) coupled with methanogenic upflow anaerobic sludge blanket (UASB) reactor. Results indicate that the intensity of micro-aeration influenced the hydrolysis and methane yield. Adequate micro-aeration intensity in LBR-3h and LBR-2h significantly enhanced the carbohydrate and protein hydrolysis by 21–27% and 38–64% respectively. Due to the accelerated acidogenesis, more than 3-fold of acetic acid and butyric acid were produced in LBR-3h as compared to the anaerobic treatment LBR-AN resulting in the maximum methane yield of 0.27 L CH₄/g VS_added in the UASB. The performance of LBR-6h with inadequate aeration was similar to that of LBR-AN with a comparable hydrolysis degree. Nevertheless, higher aeration intensity in LBR-2h was also unfavorable for methane yield due to significant biomass generation and CO₂ respiration of up to 18.5% and 32.8% of the total soluble hydrolysate, respectively. To conclude, appropriate micro-aeration rate can promote the hydrolysis of solid organic waste and methane yield without undesirable carbon loss and an aeration intensity of 258 L-air/kg TS/d is recommended for acidogenic LBR treating food waste.     

Long-term study of heavy metal pollution in the northern Hangzhou Bay of China: temporal and spatial distribution,contamination evaluation,and potential ecological risk

Environmental Science and Pollution Research - Coastal ecosystem is vulnerable to heavy metal contamination. The northern Hangzhou Bay is under intensifying impact of anthropogenic activities. To...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

CO2 dynamic of Lake Donghu highlights the need for long-term monitoring

Environmental Science and Pollution Research - Inland freshwater lakes have been widely considered as significant sources of CO2 to the atmosphere. However, long-term measurements of CO2 dynamics...     

Sustainability prioritization of sewage sludge to energy scenarios with hybrid-data consideration: a fuzzy decision-making framework based on full consistency method and fusion ranking model

Environmental Science and Pollution Research - This work proposed a novel mathematical framework for the sustainability assessment of sewage sludge to energy (SStE) scenarios, by resorting to fuzzy...     

Soil-plant nitrogen isotope composition and nitrogen cycling after biochar applications

Environmental Science and Pollution Research - Biochar has strong potential to improve nitrogen (N) use efficiency in both agricultural and horticultural systems. Biochar is usually co-applied with...     

Facile in situ synthesis of silver nanocomposites based on cellulosic paper for photocatalytic applications

Environmental Science and Pollution Research - In this work, various photocatalysts were synthesized with an impregnation-precipitation process to in situ decorate Ag-based nanoparticles (NPs,...     

Mercury uptake by Paspalum distichum L. in relation to the mercury distribution pattern in rhizosphere soil

Environmental Science and Pollution Research - Paspalum distichum L. was tested to evaluate their phytoremediation capacity for Hg contaminated soil through analyzing the dissipation of Hg in soil...     

The catalytic performance of Cu46Zr47-xAl7Yx amorphous ribbons in the degradation of AO II dye wastewater

Environmental Science and Pollution Research - Metallic glasses (MGs) with unique disordered atomic stacking structures exhibit excellent catalytic performance in wastewater treatment. The...