In situ immobilization of cadmium in soil by stabilized biochar-supported iron phosphate nanoparticles

The potential for nanoscale phosphate amendments to remediate heavy metal contamination has been widely investigated, but the strong tendency of nanoparticles to form aggregates limits the application of this technique in soil. This study synthesized a composite of biochar-supported iron phosphate nanoparticle (BC@Fe₃(PO₄)₂) stabilized by a sodium carboxymethyl cellulose to improve the stability and mobility of the amendment in soil. The sedimentation test and column test demonstrated that BC@Fe₃(PO₄)₂ exhibited better stability and mobility than iron phosphate nanoparticles. After 28 days of simulated in situ remediation, the immobilization efficiency of Cd was 60.2 %, and the physiological-based extraction test bioaccessibility was reduced by 53.9 %. The results of sequential extraction procedures indicated that the transformation from exchangeable (EX) Cd to organic matter (OM) and residue (RS) was responsible for the decrease in Cd leachability in soil. Accordingly, the pot test indicated that Cd uptake by cabbage mustard was suppressed by 86.8 %. Compared to tests using iron phosphate nanoparticles, the addition of BC@Fe₃(PO₄)₂ to soil could reduce the Fe uptake of cabbage mustard. Overall, this study revealed that BC@Fe₃(PO₄)₂ could provide effective in situ remediation of Cd in soil.     

Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment

Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).     

Effect of alginate on the aggregation kinetics of copper oxide nanoparticles (CuO NPs): bridging interaction and hetero-aggregation induced by Ca<Superscript>2+</Superscript>

The stability of CuO nanoparticles (NPs) is expected to play a key role in the environmental risk assessment of nanotoxicity in aquatic systems. In this study, the effect of alginate (model polysaccharides) on the stability of CuO NPs in various environmentally relevant ionic strength conditions was investigated by using time-resolved dynamic light scattering. Significant aggregation of CuO NPs was observed in the presence of both monovalent and divalent cations. The critical coagulation concentrations (CCC) were 54.5 and 2.9 mM for NaNO₃ and Ca(NO₃)₂, respectively. The presence of alginate slowed nano-CuO aggregation rates over the entire NaNO₃ concentration range due to the combined electrostatic and steric effect. High concentrations of Ca²⁺ (>6 mM) resulted in stronger adsorption of alginate onto CuO NPs; however, enhanced aggregation of CuO NPs occurred simultaneously under the same conditions. Spectroscopic analysis revealed that the bridging interaction of alginate with Ca²⁺ might be an important mechanism for the enhanced aggregation. Furthermore, significant coagulation of the alginate molecules was observed in solutions of high Ca²⁺ concentrations, indicating a hetero-aggregation mechanism between the alginate-covered CuO NPs and the unabsorbed alginate. These results suggested a different aggregation mechanism of NPs might co-exist in aqueous systems enriched with natural organic matter, which should be taken into consideration in future studies.

Open image in new window

Graphical abstract Hetero-aggregation mechanism of CuO nanoparticles and alginate under high concentration of Ca²⁺

     

“十二五”畜禽养殖污染减排问题及防治对策

对中国"十二五"前3年畜禽养殖业污染减排实践中存在的问题和面临的困境进行了分析和梳理,针对问题依据各地养殖现状核算了各区域耕地粪污承载负荷。据此提出种养结合是区域适宜的粪污治理思路,为地方政府与环境主管部门推进畜禽养殖污染防治和粪污资源化利用提出了建议。     

电絮凝—超滤组合工艺处理设施农业营养废液的试验研究

设施农业营养废液具有氮和磷营养元素含量高、碳元素少、病原菌多的特点,直接排放会污染环境、影响生态平衡,因此排放前需经过适当净化处理。为此,采用电絮凝—超滤组合工艺对设施农业营养废液进行处理,重点研究了电絮凝—超滤组合工艺对营养废液中污染物的去除效果,同时考察了电流密度和电解时间对处理效果的影响。结果表明,电絮凝—超滤组合工艺对大肠杆菌、总磷、总氮和总有机碳(TOC)都有一定的去除效果,在电流密度为1.78mA/cm2、电解时间为30min、超滤压力为0.16 MPa的条件下,其去除率分别为99.88%、99.76%、47.59%、28.72%。因此,电絮凝—超滤组合工艺对设施农业营养废液有较好的处理效果。     

APSFZn在富营养化湖泊型水体中的应用

采用复合共聚法制备一种新型无机高分子絮凝剂凹凸棒-聚硅酸铁锌(APSFZn),并应用于富营养化湖泊型原水的实验研究。考察了水体p H、投加量、搅拌强度影响因素对絮凝效果的影响。研究表明,APSFZn具有较宽的p H使用范围。当p H为7.6、投加量为20 mg/L、搅拌强度为快搅速度200 r/min,快搅时间2 min,慢搅速度50 r/min,慢搅时间15 min时,APSFZn絮凝剂对Chl-a、CODMn、TP和TN的去除率分别为91.57%、87.11%、93.48%和48.98%。与传统絮凝剂PAC、PFS、PSFZn对比,APSFZn的絮凝效果明显优于传统絮凝剂。该絮凝剂制备简单、具有良好的稳定性和絮凝特性、工艺无二次污染,将APSFZn应用于富营养化湖泊型原水具有良好的絮凝效果。     

船舶柴油机选择性催化还原积碳臭氧直接氧化再生

为解决船舶柴油机SCR催化剂积碳再生问题,提出了臭氧直接氧化再生的方法。实验用玻璃纤维无胶滤筒采集PM,然后在管式炉中用臭氧氧化滤筒中的PM,研究了温度和臭氧浓度对PM氧化的影响。实验表明,臭氧的最佳氧化温度窗口为200~240℃,PM氧化速度随臭氧浓度提高明显加快,PM氧化率可以达到92%以上。根据实验结果,提出了船舶柴油机SCR积碳O3低温再生技术方案。     

江苏省太湖流域水功能区纳污能力及限制排污总量研究

水功能区纳污能力及限制排污总量研究是制定区域水污染控制规划的基础。依据《江苏省地表水(环境)功能区划》,结合江苏省太湖流域现状水质和污染概况,针对河网区和湖库区分别采用一维、二维非稳态模型,计算江苏省太湖流域水功能区纳污能力,在此基础上,引入最大污染物入河量,核定50%、75%和90%水文保证率下的最大污染物入河量分别为2015年、2020年和2030年限排总量。结果表明:(1)CODMn和氨氮纳污能力分别为284 803 t/a和22 448 t/a;(2)2015年CODMn和氨氮限排总量分别为221 867 t/a和20 520 t/a,2020年和2030年限排总量递减,均小于纳污能力;(3)CODMn和氨氮入河量削减率分别为21.8%和46.3%,与水质超标率相差均在25%以内,基本相符。江苏省太湖流域纳污能力、限排总量、污染物入河量削减率和水质超标率之间关系合理,计算结果合理。研究成果为太湖流域水环境控制规划提供决策依据。     

不同混凝剂处理松花江低温水

东北松花江地区冬季有将近6个月的冰封期,低温季节水源水处理难度大。为了保证东北地区冬季饮用水供应,研究几种混凝剂在处理冬季松花江低温水时的混凝效果。实验结果表明,NPAC1和NPAC2水解产物中具有较高的Alb和Alc成分,拥有较高的电中和、吸附和网捕卷扫性能,高效聚铝铁(PAF)水解产物Fe(OH)3具有比表面积大、吸附架桥作用较强的优点。这3种混凝剂无论是在控制出水浊度还是在对水体有机物去除能力方面均优于目前水厂所使用的PAC和聚合氯化铝铁(水厂PAF);NPAC2的投加量达到50 mg/L时,出水浊度达到最优;当混凝剂投加量达到50 mg/L时,NPAC1的浊度去除率逐渐超过NPAC2,剩余浊度低于3.0 NTU;NPAC1、NPAC2和PAF 3种混凝剂对有机物的去除能力大致相当,当混凝剂投加量为50 mg/L时,这3种混凝剂处理后的水的UV254的值均低于0.06,而水厂使用的2种混凝剂处理后的水的UV254仍高于0.1;结合其对浊度去除的情况,可以判断55 mg/L的投药量为NPAC1的最优投药点,PAF的最佳投药量为65 mg/L;投加适量的粉末活性碳可以有效地提高氨氮的去除率,当粉末活性炭的投加量为30 mg/L时,氨氮的去除率基本达到最大(51.27%)。表面负荷对混凝效果具有重要的影响,合理降低沉淀池的表面负荷对于提高出水水质具有重要作用。     

铁盐与铝盐对腈纶废水生化出水混凝特性的对比

针对腈纶废水生化单元出水,对比研究了Al2(SO4)3和Fe2(SO4)3在不同絮凝剂投量和p H时的混凝处理效果,并利用紫外-可见分光光度法(UV-Vis)、三维荧光光谱(EEM)、凝胶渗透色谱(HPSEC)等对混凝特性进行了初步探讨。研究显示,2种混凝剂在投量为63.5 mg/L时可获得30%以上的COD去除率,且最佳p H为中性附近。当投量小于32 mg/L时,Al2(SO4)3较Fe2(SO4)3具有更高的COD去除率,进一步增大混凝剂的投量很难提高Al2(SO4)3对COD的去除率,而Fe2(SO4)3则在有限范围内能持续提高COD去除率。EEM光谱分析显示,与Al2(SO4)3相比,Fe2(SO4)3对有机物具有更广的处理范围和更好的去除效果。HPSEC分析表明,Fe2(SO4)3相对于Al2(SO4)3在去除重均分子量为2 776、1 856和1 325 Da的有机物组分方面具有优势。铁盐或铝盐混凝是深度净化腈纶废水生化单元出水的可行方案之一。