三价砷和五价砷对活性污泥几种酶活性的影响

应用静态试验,研究了As(Ⅲ),As(Ⅴ)对活性污泥脱氢酶活性、脲酶活性、蛋白酶活性的影响。其结果:抑制10%脱氢酶、脲酶、蛋白酶活性的As(Ⅲ)浓度分别为10.0mg/gMLSS,13.4mg/gMLSS,2.6mg/gMLSS;As(Ⅴ)的浓度则分别为552.6mg/gMLSS,464.4mg/gMLSS,193.7mg/gMLSS。As(Ⅲ)对活性污泥的毒性比As(Ⅴ)平均大53倍。     

多环芳烃的分配系数与双区理论

以双区理论为基础,提出了多环芳烃的致癌性与其分配系数之间的定量关系方程,并利用该方程计算了77个多环芳烃的致癌性。计算值与实验值基本符合。     

Insights into reactive oxygen species formation induced by water-soluble organic compounds and transition metals using spectroscopic method

Ambient particulate matter (PM) can cause adverse health effects via their ability to produce Reactive Oxygen Species (ROS). Water-Soluble Organic Compounds (WSOCs), a complex mixture of organic compounds which usually coexist with Transition Metals (TMs) in PM, have been found to contribute to ROS formation. However, the interaction between WSOCs and TMs and its effect on ROS generation are still unknown. In this study, we examined the ROS concentrations of V, Zn, Suwannee River Fulvic Acid (SRFA), Suwannee River Humic Acid (SRHA) and the mixtures of V/Zn and SRFA/SRHA by using a cell-free 2′,7′-Dichlorodihydrofluorescein (DCFH) assay. The results showed that V or Zn synergistically promoted ROS generated by SRFA, but had an antagonistic effect on ROS generated by SRHA. Fluorescence quenching experiments indicated that V and Zn were more prone to form stable complexes with aromatic humic acid-like component (C1) and fulvic acid-like component (C3) in SRFA and SRHA. Results suggested that the underlying mechanism involving the fulvic acid-like component in SRFA more tending to complex with TMs to facilitate ROS generation through π electron transfer. Our work showed that the complexing ability and complexing stability of atmospheric PM organics with metals could significantly affect ROS generation. It is recommended that the research deploying multiple analytical methods to quantify the impact of PM components on public health and environment is needed in the future.     

低温条件下生物除磷系统的强化启动和运行

本文通过对比试验对冬季低温条件下生物除磷系统的启动和运行进行了研究，结果表明，低温条件下：(1)温度对生物除磷系统的影响是通过影响有机物的酸化水解而间接产生作用的；(2)通过人工投加HAc使污水中VFA≥80mg／L时，可以顺利启动生物除磷系统；(3)设置独立水解酸化池，可以提高生物除磷效果，在进水COD=150～300mg/L、磷酸盐=5mg／L时，出水磷酸盐≤1mg／L；(4)低温条件下按照水解-外循环ERP-SBR方式运行时，在磷酸盐浓度高达10mg／L的情况下仍能保证出水磷酸盐浓度≤0．5mg／L。     

Detecting forest landcape boundary between Mountain Birch and evergreen eoniferous forest in the northern slope of Changbai Mountain

Boundaries between different forest types in Changbai Mountain Eatern China are results from complex interactions between forest ecosystems,topogrphy,and geomorphology.Detecting and quantifying the transitional zones are highly important since high environmental beterogeneity and biodiversity are ofter found within these zpmes.In this study,we used GIS and multivariate statistics techniques(PCA and MSWA) to analyze data from Landsat TM satellite imageries and quantitatively determined the positions and widths of the landscape boundary betweeen mountain birch and evergreen coniferous forests in the northern slope of Changbai Mountain.The results showed that the widths of the landscape boundary ranges from 30-50 m while using the MWW A or/and PC method.Such detected widths are consistent with field transect data that suggest a 50m tranistional zone width.The results further suggest that TM data can be used in combination with GIS and statistical techniques in determining forest landscape boundaries.MSWA is more reliable than PCA,while PCA can also be used to determine the landscape boundary when transects are properly located.     

反硝化聚磷一体化设备生产性实验研究

反硝化聚磷一体化设备主要特点是在利用含反硝化聚磷菌的活性污泥在缺氧状态过量聚磷，在完成磷去除的同时进行反硝化。通过实验得出缺氧释磷在前30min内大量释放，60min以后甚微；反硝化吸磷在最初10几分钟内速率极大；吸磷与反硝化紧密相关；聚磷菌在释、聚磷时利用一定量的有机物。     

基于集集地震的建筑物易损性统计分析

文章收集了台湾921集集地震的强地震动和震害调查资料，利用统计分析的方法，分析了建筑物破坏的数量、震中距、地表加速度之间的关系，对集集地震做了基于地震动参数的易损性初步分析。     

炼油污水气浮絮凝处理中试

气浮絮凝是炼油污水处理工艺中重要的一步 ,它是确保炼油污水生化处理顺利运行的关键 ,而开发和筛选优良的絮凝剂则又是提高气浮处理效果的保证。采用无机—有机复合絮凝剂进行炼油污水的中试试验 ,通过一系列条件试验 ,确定了复合絮凝剂投药剂量、投药间隔时间和投药方式 ,取得了令人满意的试验效果 ,CODCr的去除率 5 5 % ,石油类去除率 >75 % ,为后续的生化处理提供了合格的水质     

研究单位压边力值对板料成形性能的影响

主要介绍板料在拉深成形过程中单位压边力值对板料成形性能的影响。研究方法采用仿真技术 ,指出板料在成形过程中如按最初设定的单位压边力值进行成形 ,那么 ,板料成形过程中单位压边力值将逐渐增大 ,严重影响板料成形极限。如果采用控制板料在成形过程中压边圈下坯料的单位压边力值 ,将提高板料成形极限。其结论为生产现场提高板料成形性能和表面质量提供了一种可实施的方法。     

Recovery of heavy metals from electroplating sludge and stainless steel pickle waste liquid by ammonia leaching method

１　ＩｎｔｒｏｄｕｃｔｉｏｎＥｌｅｃｔｒｏｐｌａｔｉｎｇｓｌｕｄｇｅ，ｃｏｎｔａｉｎｉｎｇＣｕ，Ｎｉ，Ｚｎ，Ｃｒ，Ｆｅ，ｅｔｃ．，ｉｓｈａｒｍｆｕｌｗａｓｔｅｍａｔｅｒｉａｌｐｒｏｄｕｃｅｄｂｙｇａｌｖａｎｉｚａｔｉｏｎｉｎｄｕｓｔｒｙ．Ｔｈｅｒｅｉｓｓｔｉｌｌｎｏｅｆｆｅｃｔｉｖｅｍｅｔｈｏｄｔｏｒｅｃｏｖｅｒｒｅｓｏｕｒｃｅａｎｄｃｏｎｔｒｏｌｐｏｌｌｕｔｉｏｎｂｏｔｈａｔｈｏｍｅａｎｄａｂｒｏａｄ．Ｔｈｅｍｅｔａｌｓｄｉｓｃａｒｄｅｄｂｙｇａｌｖａｎｉｚａｔｉｏｎｉｎｄｕｓｔｒｙａｍｏｕｎ…