某铝厂熔铸项目职业病危害控制效果评价

采用职业卫生调查、职业卫生检测、检查表分析法等方法对某铝厂熔铸项目存在的职业病危害进行了识别、分析,提出了职业病危害防护措施方面的建议。     

机械制造业中镀铬工序清洁生产方案研究

通过对机械制造业中某一电镀企业重金属离子铬的产排污情况分析,评价了该企业的清洁生产水平,制定了清洁生产的中高费方案,即将镀铬工序产生的含铬废水蒸发浓缩后,浓缩液进入镀铬槽内进行回用,蒸馏水则回用于水洗槽用作清洗用水。并从技术、环境和经济3个方面进行了评估,环境评估从7个方面进行,如资源与能源、废弃物排放量变化、回收利用情况等,证明该方案实施是可行的,为我国机械制造业中镀铬工序的清洁生产提供了参考依据。     

从新疆煤炭产业布局看我国主体功能区规划实施

新疆经济发展对煤炭资源依赖程度愈发强烈,在限制开发区大力发展煤炭矿区及煤电化,不可避免地使资源环境承载压力加剧,使主体功能区规划实施效果大打折扣。在这一背景下,为了促进主体功能区规划在我国经济发展中发挥更有效的作用,本文从新疆煤炭产业布局入手,分析主体功能区规划实施中的问题,并提出改进建议。     

2010-2013年舟山污水处理厂排污口邻近海域的表层水质评价

根据2010—2013年对浙江舟山2个污水处理厂排污口邻近海域14个站位的表层海水铜、铅、锌、镉、砷、总铬、总汞、p H值、无机氮、活性磷酸盐、石油类、化学耗氧量、悬浮物和粪大肠菌群等14项污染因子的调查,采用单因子指数法和营养指数法对监测海域海水水质进行评价。结果表明,舟山污水处理厂排污口邻近海域表层海水质量总体良好,基本符合第二类海水水质标准;主要污染因子为无机氮、活性磷酸盐和悬浮物,其他水质指标则较低;2个污水处理厂排污口邻近海域海水均呈高富营养化状态,并受到一定程度的铅污染。     

两种微藻胞外分泌物与NO2-、NO3-对2，4-D光解的影响

在模拟太阳光照射下,利用旋转式光化学反应装置,研究了海水小球藻(Chlorella vulgaris)和新月菱形藻(Nitzschia closterium)的胞外分泌物(EOM),以及分别在NO-2或(和)NO-3共存条件下对2,4-二氯苯氧乙酸(2,4-D)光解的影响.实验结果表明,2,4-D在海水小球藻和新月菱形藻EOM及分别在NO-2、NO-3共存下的光解过程均符合准一级动力学反应.研究发现,2,4-D的光解速率随海水小球藻和新月菱形藻EOM浓度的增加而减小,表明这两种微藻EOM可抑制海水中2,4-D的光解.当在微藻EOM溶液中分别加入不同浓度的NO-2或NO-3后,微藻EOM对2,4-D光解的抑制作用减弱,且随着NO-2和NO-3浓度的增加,2,4-D光解速率明显增加.特别是当微藻EOM与NO-2或NO-3三者共存时,可进一步促进2,4-D的光解.     

新型螯合型表面活性剂增溶菲的热力学和动力学研究

采用批平衡试验法,研究了新型螯合型表面活性剂N-十二酰基乙二胺三乙酸钠(N-LED3A)增溶菲的性能,并探讨了其增溶热力学和动力学特征.结果表明:N-LED3A可有效增溶菲,菲的表观溶解度S*w及其在表面活性剂单体和胶束相的分配系数Kmn和Kmc均随温度升高而增大;N-LED3A的临界胶束浓度(CMC)随温度的升高(15、25、35、45℃)呈现先减小后增大的趋势;菲在N-LED3A单体/水、胶束/水的表观摩尔分配焓变ΔH*mm、ΔH*mc分别为18.30、13.12 kJ·mol-1,菲在水、N-LED3A单体和胶束中的表观摩尔溶解热分别为18.87、37.17和31.99 kJ·mol-1,均为吸热过程,故温度升高有利于菲在N-LED3A单体和胶束中的分配作用,菲在水、N-LED3A单体和胶束中的溶解量随温度升高而增大。动力学方程拟合结果表明,一级动力学方程最适合描述N-LED3A对菲的增溶过程.     

Metal composition of layered double hydroxides (LDHs) regulating ClO4- adsorption to calcined LDHs via the memory effect and hydrogen bonding

A series of calcined carbonate layered double hydroxides （CLDHs） with various metal compositions and different M^2＋/M^3＋ ratios were prepared as adsorbents for perchlorate. Adsorption isotherms fit Langmuir model well, and the adsorption amount followed the order of MgA1-CLDHs 1〉 MgFeCLDHs 〉〉 ZnA1-CLDHs. The isotherms of MgA1-CLDHs and MgFe-CLDHs displayed a two-step shape at low and high concentration ranges and increased with an increase in the M^2＋/M^3＋ ratio from 2 to 4. The two-step isotherm was not observed for ZnA1-CLDHs, and the adsorption was minimally affected by the M^2＋/M^3＋ ratio. The LDHs, CLDHs and the reconstructed samples were characterized by X-ray diffraction, SEM, FT-IR and Raman spectra to delineate the analysis of perchlorate adsorption mechanisms. The perchlorate adsorption of MgA1-CLDHs and MgFe-CLDHs was dominated by the structural memory effect and the hydrogen bonds between the free hydroxyl groups on the reconstructed-LDHs and the oxygen atoms of the perchlorates. For ZnAI-CLDHs, the perchlorate adsorption was controlled by the structural memory effect only, as the hydroxyl groups on the hydroxide layers preferred to form strong hydrogen bonds with carbonate over perchlorate, which locked the intercalated perchlorate into a more confined nano-interlayer. Several distinct binding mechanisms of perchlorate by CLDHs with unique M^2＋ ions were proposed.     

Combination of heterogeneous Fenton-like reaction and photocatalysis using Co-TiO2 nanocatalyst for activation of KHSO5 with visible light irradiation at ambient conditions

A novel coupled system using Co–Ti O2 was successfully designed which combined two different heterogeneous advanced oxidation processes, sulfate radical based Fenton-like reaction（SR-Fenton） and visible light photocatalysis（Vis-Photo）, for degradation of organic contaminants. The synergistic effect of SR-Fenton and Vis-Photo was observed through comparative tests of 50 mg/L Rhodamine B（Rh B） degradation and TOC removal. The Rhodamine B degradation rate and TOC removal were 100% and 68.1% using the SR-Fenton/Vis-Photo combined process under ambient conditions, respectively. Moreover, based on XRD, XPS and UV-DRS characterization, it can be deduced that tricobalt tetroxide located on the surface of the catalyst is the SR-Fenton active site, and cobalt ion implanted in the Ti O2 lattice is the reason for the visible light photocatalytic activity of Co–Ti O2. Finally, the effects of the calcination temperature and cobalt concentration on the synergistic performance were also investigated and a possible mechanism for the synergistic system was proposed. This coupled system exhibited excellent catalytic stability and reusability,and almost no dissolution of Co2＋was found.     

Atmospheric sulfur hexafluoride in-situ measurements at the Shangdianzi regional background station in China

We present in-situ measurements of atmospheric sulfur hexafluoride（SF6） conducted by an automated gas chromatograph–electron capture detector system and a gas chromatography/mass spectrometry system at a regional background site, Shangdianzi,in China, from June 2009 to May 2011, using the System for Observation of Greenhouse gases in Europe and Asia and Advanced Global Atmospheric Gases Experiment（AGAGE）techniques. The mean background and polluted mixing ratios for SF6 during the study period were 7.22 × 10-12（mol/mol, hereinafter） and 8.66 × 10-12, respectively. The averaged SF6 background mixing ratios at Shangdianzi were consistent with those obtained at other AGAGE stations located at similar latitudes（Trinidad Head and Mace Head）, but larger than AGAGE stations in the Southern Hemisphere（Cape Grim and Cape Matatula）. SF6 background mixing ratios increased rapidly during our study period, with a positive growth rate at 0.30 × 10-12year-1. The peak to peak amplitude of the seasonal cycle for SF6 background conditions was 0.07 × 10-12, while the seasonal fluctuation of polluted conditions was 2.16 × 10-12. During the study period, peak values of SF6 mixing ratios occurred in autumn when local surface horizontal winds originated from W/WSW/SW/SWS/S sectors, while lower levels of SF6 mixing ratios appeared as winds originated from N/NNE/NE/ENE/E sectors.     

优化控制技术提高清洁生产水平

企业在其生产过程中存在着复杂的化学物理及生化反应,在这一系列的反应过程中产生了诸多的产品与副产品,同时也产生了污染物.