物理气相沉积硬质耐腐蚀磨损防护涂层研究进展

叙述了用物理气相沉积技术制备的硬质耐腐蚀磨损防护涂层的研究进展。重点介绍了腐蚀磨损耦合工况特性和作用机理,单元、多元掺杂氮化物涂层,高熵氮化物涂层,多层、纳米多层、纳米复合、梯度氮化物涂层耐腐蚀磨损性能研究,非金属元素/金属元素掺杂DLC涂层、多层复合DLC涂层耐腐蚀磨损性能研究,并对涂层改性、强化机理和腐蚀磨损失效机制进行了总结。最后,提出了未来物理气相沉积硬质耐腐蚀磨损防护涂层重点发展的方向,应重点发展涂层组元/结构设计、力–电耦合损伤机理研究、高效率研发设计、涂层先进制备装备与评估体系等方面的能力。     

Green and efficient degradation of cefoperazone sodium by Bi4O5Br2 leading to the production of non-toxic products: Performance and degradation pathway

Photocatalytic process represents a promising approach to overcome the pollution challenge associated with the antibiotics-containing wastewater. This study provides a green, efficient and novel approach to remove cephalosporins, particularly cefoperazone sodium (CFP). Bi₄O₅Br₂ was chosen for the first time to systematically study its degradation for CFP, including the analysis of material structure, degradation performance, the structure and toxicity of the transformation products, etc. The degradation rate results indicated that Bi₄O₅Br₂ had an excellent catalytic activity leading to 78% CFP removal compared with the pure BiOBr (38%) within 120 min of visible light irradiation. In addition, the Bi₄O₅Br₂ presents high stability and good organic carbon removal efficiency. The effects of the solution pH (3.12 - 8.75) on catalytic activity revealed that CFP was mainly photocatalyzed under acidic conditions and hydrolyzed under alkaline conditions. Combined with active species and degradation product identification, the photocatalytic degradation pathways of CFP by Bi₄O₅Br₂ was proposed, including hydrolysis, oxidation, reduction and decarboxylation. Most importantly, the identified products were all hydrolysis rather than oxidation byproducts transformed from the intermediate of β-lactam bond cleavage in CFP molecule, quite different from the mostly previous studies. Furthermore, the final products were demonstrated to be less toxic through the toxicity analysis. Overall, this study illustrates the detailed mechanism of CFP degradation by Bi₄O₅Br₂ and confirms Bi₄O₅Br₂ to be a promising material for the photodegradation of CFP.     

霾与非霾期间汞在不同粒径颗粒物上的分布特征

在我国高速经济增长过程中,霾污染日趋突出,同时大气汞污染也十分严重,而颗粒汞对于汞在大气中的循环演化意义重大.为了探讨霾污染期间汞在不同粒径颗粒物中的分布特征,采用Nano-moudi 12级(6.2~9.9μm、3.1~6.2μm,1.8~3.1μm、1.0~1.8μm、0.56~1.0μm、0.32~0.56μm、0.18~0.32μm、0.10~0.18μm,0.056~0.10μm、0.032~0.056μm、0.018~0.032μm、0.010~0.018μm)大气颗粒物采样器,对上海霾与非霾期间不同粒径大气颗粒物中的汞进行分析.结果表明,颗粒态汞含量与颗粒物含量正相关;采样期间霾天颗粒态汞平均浓度0.31 ng·m-3是非霾天颗粒态汞平均浓度0.11 ng·m-3的2~3倍;霾和非霾天颗粒态汞浓度以及颗粒物质量浓度随粒径分布呈双峰型,霾期间峰值分别出现在0.56~1.0μm粒径段和3.1~6.2μm粒径段,而非霾期峰值分别出现在0.32~0.56μm和3.1~6.2μm粒径段;霾天较非霾天颗粒态汞和颗粒物的粒径分布均出现了向大粒径方向偏移;颗粒态汞主要分布在粒径≤1μm粒子上,能够长时间停留和长距离输送;非霾期间颗粒态汞在颗粒物中的平均含量为0.029 ng·μg-1,而霾期间为0.015 ng·μg-1;霾污染过程中其他污染物迅速成长,而汞成长较慢;霾天积聚核模态粒子中颗粒态汞质量浓度为2.06 ng·m-3,而非霾天为0.55 ng·m-3,积聚态颗粒物的大幅增加,是灰霾形成的主要原因.本地源燃煤等的排放以及风沙扬尘的增加和外地源的输送是导致霾天污染严重的重要原因.     

空塔钠碱法烟气脱硫实验研究

在内径200mm,高度1100mm的喷淋塔内,采用Na2CO3作为吸收剂进行SO2吸收实验,重点研究了液气比(L/G)、空塔气速、进口SO2质量浓度、吸收液pH及初始浓度对脱硫效率的影响。通过实验得到该系统适宜操作条件:吸收液pH值在6.5～7.5之间,液气比在1～1.5之间,吸收液初始浓度5%,空塔气速1.6m/s,在此条件下,进口SO2质量浓度在3000mg/m3以内,脱硫效率可以达到80%以上。     

银川活动断层卫星遥感图像解译

采用对地表具有一定穿透能力的合成孔径雷达数据（ENVISAT ASAR）和光谱信息丰富的常规光学遥感数据（Landsat-7 ETM）作为主要数据源,综合了雷达遥感与光学遥感的成像优势,利用图像预处理、图像增强处理与多源遥感信息融合突出了银川研究区的活动断裂遥感影像特征。根据活动断层遥感解译标志,共解译出8条主要活动断层,分别为银川-平罗断裂、芦花台断裂、镇北堡断裂、黄河-灵武断裂、贺兰山东麓断裂带、黎家新庄-南泉子断裂、三关口断裂与青铜峡断裂,并对其影像特征与空间分布规律进行详细分析。银川活动断裂的解译分析为该地区的地震安全性评价与地震活动性分析奠定了基础。     

O3/UV降解喹啉过程中不同氧化剂的相对重要性

研究O₃/UV降解自配喹啉水溶液时水体中存在的不同氧化剂对喹啉降解的相对重要性的结果表明,O₃和·OH是喹啉降解过程的主要氧化剂.通过靛蓝二磺酸钠法和·OH探针化合物(对氯苯甲酸)法分别测定了水体中的O₃浓度和·OH浓度,定量地计算了O₃和·OH在降解喹啉时的相对重要性,得到喹啉与·OH的二级反应速率常数为6.65×10⁹mol·(L·s)^-1.在本试验条件下,由·OH引起的喹啉去除率占总去除率的88%,而由O₃引起的喹啉去除率占总去除率的12%.提高水体中·OH的浓度有利于提高喹啉的总降解速率.     

Determination of vanillin in vanilla perfumes and air by capillary electrophoresis

The present study investigated capillary electrophoretic detection of vanillin in vanilla perfume and air. An UV-absorbance detector was used in a home-made capillary electrophoretic instrument. A fused silica capillary (outer diameter: 364μm, inner diameter: 50 m) was used as a separation capillary, and a high electric voltage (20 kV) was applied across the two ends of the capillary. Total length of the capillary was 70 cm, and the effective length was 55 cm. Experimental results showed that the vanillin peak was detected at about 600, 450, and 500 seconds when pH of running buffers in CE were 7.2, 9.3, and 11.5, respectively. The peak area of vanillin was proportional to its concentration in the range of 0-10^-2 mol/L. The detection limit was about 10^-5 mol/L. Vanillin concentration in a 1% vanilla perfume sample was determined to be about 3×10^-4 mol/L, agreed well with that obtained by a HPLC method. Furthermore, determination of vanillin in air by combination of CE and active carbon adsorption method was investigated.     

生物法净化挥发性有机废气的吸附-生物膜理论模型与模拟研究

针对挥发性有机废气的生物法净化过程,进行了吸附-生物膜新型理论的相关动力学模型研究.经采用实验室数据和工业应用试验结果的对比验证表明,该模型对描述实际过程有很好的适用性.应用该模型对人口气体甲苯浓度、气体流量及生物膜填料层高度等主要因素的影响进行模拟研究,模拟计算值与实验值之间有较好的相关性,相关系数r为0.80～0.97.     

大气污染物对流垂直输送作用的探讨

利用一个欧拉型硫沉降模式探讨了积云对硫污染物的对流垂直输送作用．结果表明,积云引起的垂直气流是造成大气污染物浓度分布及输送通量变化的重要因素．对流垂直输送可使硫污染物在高层出现大浓度区,浓度的增加率为５０％—４００％,中层和低层的浓度相应也有所变化．积云区内南北剖面上的通量也因对流输送作用在高层出现了大值中心．     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.