7种农药对管氏肿腿蜂的毒性及初级风险评价

为评估农药对寄生类自然天敌昆虫的安全性,选择管氏肿腿蜂(Scleroderma guani Xiao et Wu)作为受试生物,采用管测药膜法测定了3种杀虫剂、2种除草剂、2种杀菌剂对其致死效应,并根据田间推荐剂量计算暴露量,采用风险商值HQ对杀虫剂进行风险评估。结果显示,与空白对照比较,3种杀虫剂均具明显毒性作用,其中丁硫克百威、吡虫啉和呋虫胺对管氏肿腿蜂的24 h半致死量(24 h-LR50)分别为5.11、2.92和0.06 g a.i.·ha-1,农田内风险商值分别为60.23、16.64和3 105。除草剂和杀菌剂在3倍最大田间推荐剂量作用下,24 h管氏肿腿蜂死亡率均小于50%。上述结果表明,在田间推荐用量下,3种杀虫剂对管氏肿腿蜂的初级风险评价为存在高风险,建议进一步开展高级阶段风险评估或者采取合理的风险管理措施来降低风险;除草剂和杀菌剂对管氏肿腿蜂的风险可接受。     

基于高通量测序的工业园区地下水和土壤细菌群落结构比较研究

为探究工业园区地下水和土壤细菌群落结构、多样性变化特征,采用高通量测序技术对地下水和土壤细菌16S r RNA基因高变区域进行序列测定。通过对Alpha多样性、物种组成、丰度和群落结构的分析,比较地下水和土壤细菌群落结构的异同。Alpha多样性的比较结果表明,土壤细菌群落多样性和丰富度明显高于地下水,地下水细菌群落多样性指数反映出地下水已受到周边污染源的影响。物种注释结果表明,地下水样品共检出48个细菌门,土壤样品共检出50个细菌门。变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)和厚壁菌门(Firmicutes)是地下水细菌群落的优势类群,共占93.54%,且该工业园区地下水细菌群落呈现出典型的淡水种群特征;土壤中优势细菌门为Proteobacteria、放线菌门(Actinobacteria)、酸杆菌门(Acidobacteria)、Firmicutes和芽单胞菌门(Gemmatimonadetes),共占85.21%。由于地下水和土壤两者的生态系统和理化环境的差异,致使Actinobacteria、Acidobacteria、绿弯菌门(Chloroflexi)、硝化螺旋菌门(Nitrospirae)、α-变形菌纲(Alphaproteobacteria)、δ-变形菌纲(Deltaproteobacteria)和Gemmatimonadetes占比在地下水和土壤细菌群落间差异显著,同时使地下水和土壤细菌群落各含有一些特有的优势细菌属(地下水2个,土壤4个)。基于高通量测序技术对工业园区样品的测序结果可以为地下水和土壤环境的生态评价提供方法依据。     

气溶胶中抗生素抗性基因研究进展:以养殖场和医院为例

抗生素在医药和养殖业的大量使用导致耐药菌的出现,加速了抗生素抗性基因(antibiotic resistance genes,ARGs)在不同环境介质中的传播扩散,抗生素耐药性已成为目前全球卫生、食品安全和发展的最大威胁之一。气溶胶作为ARGs的潜在储存库缺乏系统的研究数据,而通过空气传播具有较高抗生素抗性水平的细菌可能是引起重要疾病的主要传播途径。本文针对养殖场和医院2个抗生素大量使用的典型场所,对气溶胶中ARGs的污染现状、样品采集与检测技术进行综述,并探讨了这一环境污染的潜在风险,表明开展气溶胶中ARGs研究的必要性,并为以后需开展的工作提出几点建议。     

Arsenic sorption by red mud-modified biochar produced from rice straw

Red mud-modified biochar (RM-BC) has been produced to be utilized as a novel adsorbent to remove As because it can effectively combine the beneficial features of red mud (rich metal oxide composition and porous structure) and biochar (large surface area and porous structure properties). SEM-EDS and XRD analyses demonstrated that red mud had loaded successfully on the surface of biochar. With the increasing of pH in solution, arsenate (As(V)) adsorption on RM-BC decreased while arsenite (As(III)) increased. Arsenate adsorption kinetics process on RM-BC fitted the pseudo-second-order model, while that of As(III) favored the Elovich model. All sorption isotherms produced superior fits with the Langmuir model. RM-BC exhibited improved As removal capabilities, with a maximum adsorption capacity (Q_max) for As(V) of 5923 μg g^?1, approximately ten times greater than that of the untreated BC (552.0 μg g^?1). Furthermore, it has been indicated that the adsorption of As(V) on RM-BC may be strongly associated with iron oxides (hematite and magnetite) and aluminum oxides (gibbsite) by X-ray absorption near-edge spectroscopy (XANES), which was possibly because of surface complexation and electrostatic interactions. RM-BC may be used as a valuable adsorbent for removing As in the environment due to the waste materials being relatively abundant.     

Coupled Monte Carlo simulation and Copula theory for uncertainty analysis of multiphase flow simulation models

Environmental Science and Pollution Research - Simulation-optimization techniques are effective in identifying an optimal remediation strategy. Simulation models with uncertainty, primarily in the...     

An interprovincial cooperative game model for air pollution control in China

The noncooperative air pollution reduction model (NCRM) that is currently adopted in China to manage air pollution reduction of each individual province has inherent drawbacks. In this paper, we propose a cooperative air pollution reduction game model (CRM) that consists of two parts: (1) an optimization model that calculates the optimal pollution reduction quantity for each participating province to meet the joint pollution reduction goal; and (2) a model that distribute the economic benefit of the cooperation (i.e., pollution reduction cost saving) among the provinces in the cooperation based on the Shapley value method. We applied the CRM to the case of SO₂ reduction in the Beijing–Tianjin–Hebei region in China. The results, based on the data from 2003–2009, show that cooperation helps lower the overall SO₂ pollution reduction cost from 4.58% to 11.29%. Distributed across the participating provinces, such a cost saving from interprovincial cooperation brings significant benefits to each local government and stimulates them for further cooperation in pollution reduction. Finally, sensitivity analysis is performed using the year 2009 data to test the parameters’ effects on the pollution reduction cost savings.

Implications: China is increasingly facing unprecedented pressure for immediate air pollution control. The current air pollution reduction policy does not allow cooperation and is less efficient. In this paper we developed a cooperative air pollution reduction game model that consists of two parts: (1) an optimization model that calculates the optimal pollution reduction quantity for each participating province to meet the joint pollution reduction goal; and (2) a model that distributes the cooperation gains (i.e., cost reduction) among the provinces in the cooperation based on the Shapley value method. The empirical case shows that such a model can help improve efficiency in air pollution reduction. The result of the model can serve as a reference for Chinese government pollution reduction policy design.     

动态污水处理过程的多模型动态矩阵控制

针对活性污泥法污水处理系统的强耦合和动态变化特性,提出一种用于前置反硝化脱氮工艺的多模型动态矩阵(DMC)解耦控制方法;通过K-均值聚类分析法对外界入水中氨氮浓度进行聚类,获得以聚类中心为入水氨氮浓度的静态模型集合,分别设计线性DMC解耦控制器;再以当前时刻外界进水氨氮浓度和聚类中心为基本元素,构造切换函数,实现多模型切换。将该方法应用于活性污泥1号模型(ASM1)中,获得了较好的动态仿真效果。     

Toxicological effect of MPA-CdSe QDs exposure on zebrafish embryo and larvae

Cadmium selenium (CdSe) quantum dots (QDs) are semiconductor nanocrystals that hold wide range of applications and substantial production volumes. Due to unique composition and nanoscale properties, their potential toxicity to aquatic organisms has increasingly gained a great amount of interest. However, the impact of CdSe QDs exposure on zebrafish embryo and larvae remains almost unknown. Therefore, the lab study was performed to determine the developmental and behavioral toxicities to zebrafish under continuous exposure to low level CdSe QDs (0.05-31.25 mg L⁻¹) coated with mercaptopropionic acid (MPA). The results showed MPA-CdSe exposure from embryo to larvae stage affected overall fitness. Our findings for the first time revealed that: (1) The 120 h LC₅₀ of MPA-CdSe for zebrafish was 1.98 mg L⁻¹; (2) embryos exposed to MPA-CdSe resulted in malformations incidence and lower hatch rate; (3) abnormal vascular of FLI-1 transgenic zebrafish larvae appeared after exposure to MPA-CdSe including vascular junction, bifurcation, crossing and particle appearance; (4) larvae behavior assessment showed during MPA-CdSe exposure a rapid transition from light-to-dark elicited a similar, brief burst and a higher basal swimming rate; (5) MPA-CdSe induced embryos cell apoptosis in the head and tail region. Results of the observations provide a basic understanding of MPA-CdSe toxicity to aquatic organisms and suggest the need for additional research to identify the toxicological mechanism.     

Arsenic accumulation and speciation in the submerged macrophyte Ceratophyllum demersum L.

Introduction

Ceratophyllum demersum L. is a widespread submerged macrophyte in aquatic environments.

Methods

Simulation experiments were conducted in the laboratory to investigate arsenic (As) accumulation, speciation, and efflux of C. demersum exposed to arsenate and arsenite solutions.

Results

Plant shoots showed a significant accumulation of As with a maximum of 862 and 963???g?As?g^?1 dry weight after 4?days of exposure to 10???M arsenate and arsenite, respectively. Regardless of whether arsenate or arsenite was supplied to the plants, arsenite was the predominant species in plant shoots. Furthermore, a dramatically higher influx rate of arsenate compared with arsenite was observed in C. demersum exposed to As solutions without the addition of phosphate (P). Arsenate uptake was considerably inhibited by P in this study, suggesting that arsenate is taken up by C. demersum via the phosphate transporters. However, arsenite uptake was unaffected by P and markedly reduced in the presence of glycerol and antimonite (Sb), indicating arsenite shares the aquaporin transport pathway. In addition, C. demersum rapidly reduces arsenate to arsenite in the shoot of the plant and extrudes most of them (>60?%) to the external solutions. The efflux of arsenite was much higher than that of arsenate; the former is supposed to be both active and passive processes, and the latter through passive leakage.

Conclusion

C. demersum is a strong As accumulator and an interesting model plant to study As uptake and metabolism due to the lack of a root-to-shoot translocation barrier.     

Enhanced mercuric chloride adsorption onto sulfur-modified activated carbons derived from waste tires

A number of activated carbons derived from waste tires were further impregnated by gaseous elemental sulfur at temperatures of 400 and 650 degrees C, with a carbon and sulfur mass ratio of 1:3. The capabilities of sulfur diffusing into the micropores of the activated carbons were significantly different between 400 and 650 degrees C, resulting in obvious dissimilarities in the sulfur content of the activated carbons. The sulfur-impregnated activated carbons were examined for the adsorptive capacity of gas-phase mercuric chloride (HgC1) by thermogravimetric analysis (TGA). The analytical precision of TGA was up to 10(-6) g at the inlet HgCl2 concentrations of 100, 300, and 500 microg/m3, for an adsorption time of 3 hr and an adsorption temperature of 150 degrees C, simulating the flue gas emitted from municipal solid waste (MSW) incinerators. Experimental results showed that sulfur modification can slightly reduce the specific surface area of activated carbons. High-surface-area activated carbons after sulfur modification had abundant mesopores and micropores, whereas low-surface-area activated carbons had abundant macropores and mesopores. Sulfur molecules were evenly distributed on the surface of the inner pores after sulfur modification, and the sulfur content of the activated carbons increased from 2-2.5% to 5-11%. After sulfur modification, the adsorptive capacity of HgCl2 for high-surface-area sulfurized activated carbons reached 1.557 mg/g (22 times higher than the virgin activated carbons). The injection of activated carbons was followed by fabric filtration, which is commonly used to remove HgCl2 from MSW incinerators. The residence time of activated carbons collected in the fabric filter is commonly about 1 hr, but the time required to achieve equilibrium is less than 10 min. Consequently, it is worthwhile to compare the adsorption rates of HgCl2 in the time intervals of < 10 and 10-60 min.