Degradation of rizazole in water–sediment systems

This study investigated the degradation of rizazole in water-sediment systems (West Lake system, WL; Beijing–Hangzhou Grand Canal system, BG) with two different types of sediments under aerobic and anaerobic conditions. The half-lives of rizazole in the WL water phase (14.59–15.13 d) were similar to those in the BG water phase (15.90–16.46 d). Within 3–7 d, the rizazole concentration in the sediments reached the maximum values, i.e., equilibrium. Rizazole dissipation was faster in the WL sediment phase with higher organic matter content (T_1/2 = 18.99–19.09 d) compared with the BG sediment phase (T_1/2 = 31.08–33.32 d). Rizazole degradation was slightly faster in the West Lake water-sediment system (WL system) (T_1/2 = 17.11–18.05 d) than in the Beijing–Hangzhou Grand Canal water—sediment system (BG system) (T_1/2 = 20.51–25.02 d). The aerobic degradation of rizazole was similar to its anaerobic degradation in the water-sediment system. The findings are useful to understand the behavior of pesticide in environment.     

Kinetics study of fermentative hydrogen production from liquid swine manure supplemented with glucose under controlled pH

Kinetics of H₂ production from liquid swine manure supplemented with glucose by mixed anaerobic cultures was investigated using batch experiments under four different pH conditions (4.4, 5.0, 5.6, and uncontrolled). The temperature for the experiments was controlled at 37 ± 1°C and the length of experiments varied between 50 and 120 hours, depending upon the time needed for completion of each individual experiment. The modified Gompertz model was evaluated for its suitability for describing the H₂ production potential, H₂ production rate, and substrate consumption rate for all the experiments. The results showed that the Gompertz model could adequately fit the experimental results. The effect of pH was significant on all kinetic parameters for H₂ production including yield, production rate and lag time, and the substrate utilization rate. The optimal pH was found to be 5.0, at which a maximum H₂ production rate (0.64 L H₂/h) was obtained, and deviation from the optimal pH could result in substantial reductions in H₂ production rate (0.32 L H₂/h for pH 4.0 and 0.43 L H₂/h for pH 5.6). The results also showed that if pH was not controlled for the batch fermentation process, the substrate utilization efficiency could steeply decrease from 98.8% to 33.7%.     

Sublethal impact of paraquat on the life span and parasitic behavior of Diaeretiella rapae M’Intosh

This study focuses on assessing the impact of sublethal doses of paraquat on the survival, the emergence, the life span and the parasitic behavior of Diaeretiella rapae M’Intosh (Hymenoptera: Braconidae). The impact of sublethal doses was measured at room temperature using different densities of the cabbage aphid Brevicoryne brassicae. The results reveal that the field dose of paraquat caused 100% mortality in D. rapae. The percentage emergence of D. rapae decreased from 80.5% in the control group to 71.5% when treated with the lowest concentration of paraquat. Similarly, the life span of parasitoids that emerged from the mummy treated with paraquat also decreased significantly. Oviposition capability and ovipositor thrusting frequency of D. rapae also treated with sublethal dose paraquat decreased significantly along with a shortened patch residence time in the foraging area.     

The Autothermal Pyrolysis of Waste Tires

Abstract

The growing amount of rubber waste, such as that from tires and cables, has resulted in serious environmental problems. Since rubber waste is not easily biodegradable even after a long period of landfill treatment, material and energy recovery is the preferable alternative to disposal. The potential offered by waste tire pyrolysis for solving both energy and waste treatment problems is widely recognized. Pyrolysis is one method of inducing thermal decomposition without using any oxidizing agent, or using such a limited supply of the agent that oxidization does not proceed to an appreciable extent. The latter may be described as autothermal pyrolysis and will be studied in the present work.

The main objective of this research was to study the operating parameters of autothermal pyrolysis of scrap tires in a laboratory-scale fluidized bed reactor with a 100-cm bed height (10 cm I.D.) and a 100-cm freeboard (25 cm I.D.). Scrap tires were pyrolyzed in a limited oxygen supply, so that the heat for pyrolysis of the scrap tires was provided by combustion of some portion of the scrap tires. The operating parameters evaluated included the effect on the pyrolysis oil products and their relative proportions of (1) the air factor (O.O7–O35); (2) the pyrolysis temperature (370–570 °C); and (3) the catalyst added (zeolite and calcium carbonate). The results show that: (1) the composition of the liquid hydrocarbon obtained is affected significantly by the air factor; (2) the higher operating temperature caused a higher yield of gasoline and diesel; (3) the yield of gasoline increased due to the catalyst zeolite added, and the yield of diesel increased due to the addition of the catalyst calcium carbonate; (4) the principal constituents of gasoline included dipentene and diprene.     

Product Guide/1982

Abstract

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH₄ gas was abated and lots of fine SiO₂ particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber. Test results show that the present venturi scrubber system is effective for removing submicron particles. For SiO₂ particles greater than 0.1 μm, the removal efficiency is greater than 80–90%, depending on particle concentration. The corresponding pressure drop is relatively low. For example, the pressure drop of the venturi scrubber is ～15.4 ± 2.4 cm H₂O when the liquid-to-gas ratio is 1.50 L/m³. A theoretical calculation has been conducted to simulate particle growth process and the removal efficiency of the venturi scrubber. The theoretical results agree with the experimental data reasonably well when SiO₂ particle diameter is greater than 0.1 μm.     

2019年扬州市公共场所健康危害因素监测结果分析

为了提升扬州市公共场所卫生状况和传染病防控能力,按照国家标准于2019年对扬州市宾馆(酒店)类、沐浴类、理发店类、美容店类和候车室类5类公共场所的健康危害因素(空气质量和公共用品用具)进行监测,按照《公共场所卫生指标及限值要求》(GB 37488—2019)进行评价。结果表明,共监测空气质量样品216份,合格率为84.26%,共监测公共用品用具1 414份,合格率为96.46%,不同场所的空气质量合格率和公共用品用具微生物指标合格率差异均具有统计学意义(P 0.05)。不同类型公共用品用具监测项目中,金黄色葡萄球菌的合格率最高(100%),而真菌总数的合格率最低(93.75%)。各类公共用品用具中,拖鞋合格率最低(91.67%),床单相对较高(99.70%)。扬州市公共卫生状况总体良好,在空气质量监测中,物理项目和微生物项目合格率较低,在公共用品用具监测中,细菌总数和大肠菌群存在不合格现象。     

Evaluation of marine outfall with three-dimensional hydrodynamic and water quality modeling

Numerical models are often used to evaluate the potential impact of human alternation of natural water bodies and to help the design of the alternation to mitigate its impacts. In the past decade, three-dimensional hydrodynamic and reactive transport modeling has matured from a research subject to a practical analysis technology. This paper presents a practical study in which a three-dimensional hydrodynamic and water quality model [hydrodynamic eutrophication model (HEM-3D)] was applied to determine the optimal location for treated wastewater discharged from marine outfall system in the Keelung harbor and the adjacent coastal sea. First, model validation was conducted with respect to surface elevation, current, and water quality variables measured in the Keelung harbor station and its coastal sea. The overall performance of the model was in qualitative agreement with the available field data. The model was then used to evaluate several scenarios of the locations from marine outfall system. Based on model simulation results, a location at the northeast of Ho-Ping Island was recommended for adoption because the environmental impact is smaller than any other alternative.

Development of Customized Fire Behavior Fuel Models for Boreal Forests of Northeastern China

Knowledge of forest fuels and their potential fire behavior across a landscape is essential in fire management. Four customized fire behavior fuel models that differed significantly in fuels characteristics and environmental conditions were identified using hierarchical cluster analysis based on fuels data collected across a boreal forest landscape in northeastern China. Fuel model I represented the dense and heavily branched Pinus pumila shrubland which has significant fine live woody fuels. These forests occur mainly at higher mountain elevations. Fuel model II is applicable to forests dominated by Betula platyphylla and Populus davidiana occurring in native forests on hill slopes or at low mountain elevations. This fuel model was differentiated from other fuel models by higher herbaceous cover and lower fine live woody loading. The primary coniferous forests dominated by Larix gmelini and Pinus sylvestris L. var. mongolica were classified as fuel model III and fuel model IV. Those fuel models differed from one another in average cover and height of understory shrub and herbaceous layers as well as in aspect. The potential fire behavior for each fuel model was simulated with the BehavePlus5.0 fire behavior prediction system. The simulation results indicated that the Pinus pumila shrubland fuels had the most severe fire behavior for the 97th percentile weather condition, and had the least severe fire behavior under 90th percentile weather condition. Fuel model II presented the least severe fire potential across weather conditions. Fuel model IV resulted in greater fire severity than Fuel model III across the two weather scenarios that were examined.     

石化废水深度处理用臭氧催化氧化体系的研究＊

文章就臭氧催化氧化体系在石化废水处理中的作用进行了深入研究,对催化剂载体、催化剂配伍体系以及臭氧的投加方式进行了优化筛选。根据实验,多元催化掺杂体系较一元催化体系氧化效果好,CODCr的去除率可由一元催化时的20%提高到多元催化时的33%;在臭氧的投加方式上,分段投加要优于单级投加,臭氧投加分配比例为6∶3∶1时,CODCr的去除率可由单一投加时的9%提高到分级投加时的19%。