Methanolysis and Hydrolysis of Polycarbonate Under Moderate Conditions

Alkali-catalyzed methanolysis and hydrolysis of polycarbonate (PC) in a solvent in which PC can substantially dissolve such as N-methyl-2-pyrrolidone, 1,4-dioxane, tetrahydrofuran and so on were studied. Reaction conditions were optimized for the purpose of recycling PC in the form of bisphenol A and carbon carbonate. The results showed that both the methanolysis and hydrolysis of PC could take place under moderate conditions. Under the conditions of reaction temperature 40 °C, m(PC):m(MeOH) = 1:1, m(PC):m(NaOH) = 50:1, reaction time 35 min and using tetrahydrofuran as solvent, the methanolysis conversion of PC was almost 100% and the yield of bisphenol A was over 95%. Moreover, under the conditions of reaction temperature 100 °C, m(PC):m(H₂O) = 1:0.7, m(PC):m(NaOH) = 10:1, reaction time 8 h and using 1,4-dioxane as solvent, the hydrolysis conversion of PC was almost 100% and the yield of bisphenol A was over 94%.     

粒径对镁粉爆炸特性的影响

在简要分析了镁粉爆炸的过程和特性基础上,结合在20 L球型爆炸测试装置中对粒径D50为6,47,104,173 μm镁粉的爆炸特性实验数据,着重分析了粒径对镁粉爆炸特性所产生的影响.实验结果表明,随着粒径的增大,镁粉的爆炸危险性随之减小.     

烟花爆竹在生产过程中的安全管理

烟花生产企业人群知识水平低,认识程度不高;同时,在管理上,缺乏正确引导,一些主管部门没有为企业建立长远的引导规划意识,只是见事说事,按程序办事,现在烟花企业形式不容乐观。作为一个烟花企业,应从以下几点进行安全与质量的管理完善。     

GC-PID联用直接测定大气中痕量烃类化合物

作者把气相色谱仪(GC)与自行研制的光离子化检测器(PID)联用,实现了大气中痕量烃类化合物的直接测定,给出了仪器的构成和性能指标及测量结果.     

学龄儿童肺功能水平影响因素的研究

用逐步回归分析方法对与室内、外空气污染和机体状况等有关的因素对广州市学龄儿童肺功能 (FVC、FEV1 、PEFR和 FEF2 5～ 75 )水平的影响进行研究。结果提示 ,影响肺功能水平的主要因素是内因 ,身高的影响最明显 ,呼吸系统疾病或症状发生与肺功能水平下降有关 ;室外空气污染使肺功能水平下降 ,SO2 、NOx 和 PM2 .5 的影响明显 ,PM2 .5 的影响明显大于 PM1 0 和 TSP;居室或厨房通风不良、家庭烹饪用不洁燃料对儿童肺功能的生长不利 ;被动吸烟对女性儿童肺功能有不利影响。对各种影响因素 ,PEFR和 FEF2 5～ 75 比 FVC和 FEV1 更为敏感     

环境监测报告(记录)的审核原则和方法

从实际工作出发,提出了审核原始记录、数字型监测报告（报表）和文字型监测报告的审核原则和方法。     

运用法律手段加强环境治理工作的有效性

单靠道德自律及经济、行政性处罚等手段 不可能从根本上解决环境问题,唯有加强法律作为硬性强制性手段,才能加大环保工作的有效性。     

Characteristics of atmospheric carbonyls and VOCs in Forest Park in South China

The diurnal variation of atmospheric carbonyls and VOCs in a forest in south China were studied in summer 2004. Twenty kinds of carbonyls and eight kinds of VOCs were identified and quantified. Formaldehyde and acetaldehyde were the two most abundant carbonyls, while the most abundant VOCs were isoprene, followed by o-xylene. Most C₃-C₁₀ carbonyls had higher concentrations from 09:00 to 15:00, and their levels were lower during night-time and often reached the lowest in early morning. Formaldehyde and acetaldehyde, however, showed two high levels in their diurnal patterns partly due to their different sources and sinks. The VOCs had different diurnal patterns compared to most carbonyls. The highest concentrations were observed from 03:00 to 06:00 for 1-butene, from 06:00 to 12:00 for isoprene, and from 12:00 to 15:00 for α-pinene. The highest levels for aromatic hydrocarbons occurred during midnight and the lowest in late afternoon. According to the study, emissions from vegetation and photo-oxidation of gas-phase hydrocarbons were the main sources for some carbonyls and VOCs in this region. Other compounds, such as formaldehyde, acetaldehyde and BTEX, showed anthropogenic sources.     

A storm event-based approach to TMDL development

It is vitally important to define the critical condition for a receiving water body in the total maximum daily load (TMDL) development process. One of the major disadvantages of using a continuous simulation approach is that there is no guarantee that the most critical condition will be covered within the subjectively selected representative hydrologic period, which is usually several years depending on the availability of data. Another limitation of the continuous simulation approach, compared to a design storm approach, is the lack of an estimate of the risk involved. Because of the above limitations, a storm event-based critical flow-storm (CFS) approach was previously developed to explicitly address the critical condition as a combination of a prescribed stream flow and a storm event of certain magnitude, both having a certain frequency of occurrence and when combined, would create a critical condition. The CFS approach was tested successfully in a TMDL study for Muddy Creek in Virginia. The present paper reports results of a comparative study on the applicability of the CFS approach in Taiwan. The Dy-yu creek watershed in northern Taiwan differs significantly from Muddy Creek in terms of climate, hydrology, terrain, and other characteristics. Results show that the critical condition for different watersheds might be also different, and that the CFS approach could clearly define that critical condition and should be considered as an alternative method for TMDL development to a continuous simulation approach.     

Occurrence and distribution of polycyclic aromatic carbons in sludges from wastewater treatment plants in Guangdong, China

In this study, the occurrence and distribution of polycyclic aromatic hydrocarbons (PAHs) were investigated in six sludge samples collected from Guangdong Province, China. Concentrations of PAHs varying from 2,534.1 to 6,926.6 μg kg^???1 (dry sludge) were observed in three municipal wastewater treatment plants with phenanthrene (Phe), fluoranthene, and pyrene being the main compounds. In addition, 682.6 μg kg^???1 PAHs were detected in one sludge sample from a food processing plant, with fluorene, Phe, and chrysene being the main components. No PAHs were detected in sludge samples obtained from two cosmetic plants. The levels and distributional characteristics of PAHs, polychlorinated biphenyls (PCBs), and polycyclic musks (PMs) from the samples were also compared. The results of this comparison indicated that petrochemical refineries and road traffic played important roles in the PAH loads in sludge, while PMs primarily originated from domestic wastewater and industrial wastewater from cosmetic plants. Finally, the presence of 98.8 μg kg^???1 PCBs in sludge suggested diffusional emission sources from electrical components containing PCBs.