应用D412螯合树脂治理含镍电镀废水的研究

本文研究了Ｄ４１２螯合树脂对Ｎｉ（Ⅱ）离子静态和动态的吸收性能,并且研究了使用Ｄ４１２树脂除去和回收电镀废水中镍的最佳条件。     

Sorption of polar and nonpolar aromatic compounds to four surface soils of eastern China

Improved predictions on the fate of organic pollutants in surface environments require a better understanding of the underlying sorption mechanisms that control their uptake by soils. In this study, we monitored sorption of nine aromatic compounds with varying physicochemical properties (hydrophobicity, electron-donor/acceptor ability and polarity), including two polycyclic aromatic hydrocarbons, two chlorobenzenes, two nitroaromatic compounds, dichlobenil, carbaryl and 2,4-dichlorophenol in aqueous suspension of four surface soils of eastern China. The tested soils were characterized with respect to organic carbon (OC) content, black carbon content, mineralogy, morphology and size fraction to assess the role of the diverse soil characteristics in sorption. The results of this study show that not only the solute hydrophobicity and the OC content of soil are important to the retention of organic pollutants, but also the solute molecular structure and the soil nature.     

Global sensitivity analysis of a process-based model for ammonia emissions from manure storage and treatment structures

The development of process-based models to estimate ammonia emissions from animal feeding operations (AFOSs) is sought to replace costly and time-consuming direct measurements. Critical to process-based model development is conducting sensitivity analysis to determine the input parameters and their interactions that contribute most to the variance of the model output. Global and relative sensitivity analyses were applied to a process-based model for predicting ammonia emissions from the surface of anaerobic lagoons for treating and storing manure. The objectives were to compare global sensitivity analysis (GSA) to relative (local) sensitivity analysis (RSA) on a process-based model for ammonia emissions. Based on the first-order coefficient, both GSA and RSA showed the model input parameters in order of importance in process model for ammonia emissions from lagoon surfaces were: (i) pH, (ii) lagoon liquid temperature, (iii) wind speed above the lagoon surface, and (iv) the concentration of ammoniacal nitrogen in the lagoon. The GSA revealed that interactions between model parameters accounted for over two-thirds of the model variance, a result that cannot be achieved using traditional RSA. Also, the GSA showed that parameter interactions involving liquid pH had more impact on the model output variance than the single parameters: (i) temperature, (ii) wind speed, or (iii) total ammoniacal nitrogen. This study demonstrates that GSA provides a more complete analysis of model input parameters and their interactions on the model output compared to RSA. A comprehensive tutorial regarding the application of GSA to a process model is presented.     

隔震:保证建筑物地震安全的最佳选择

<正>几十年地震预报实践说明,地震预报尚未成熟,远未达到实用化,目前仍属于摸索探索阶段。有些地震虽然说可能作预测预报,但即使预报了,对一个大城市而言也不会轻易疏散、停工停产,而且地震发生了城市的物质文明建设照样会遭到严重破坏。换个方式去思维去实践,即把城乡建筑的抗震性能提高了,尤其是住宅建筑和重     

化学还原法回收含银电镀废液中的银

以Na2S2O4为还原剂,采用化学还原法回收某电镀厂含银电镀废液中的银。实验结果表明,在n(Na2S2O4)∶n(Ag+)=2.5、反应温度35℃、废水pH7.5、搅拌速率300r/min的条件下,Ag+回收率达到99.92%。对回收的银粉进行X射线衍射和扫描电子显微镜分析,分析结果表明回收的银粉纯度较高,成球形。     

废纸苯酚液化物合成热固型酚醛树脂

为了提高废纸的附加值,利用废纸苯酚液化物与甲醛在碱性环境中反应,进行热固型酚醛树脂合成实验。通过正交实验确定最优化的树脂化合成工艺为:n(甲醛)∶n(废纸液化物)=2.1,n(氢氧化钠)∶n(废纸液化物)=0.5,合成温度74℃,合成时间3.0h。在此工艺条件下制备的酚醛树脂压制的胶合板达到GB/T9846—2004《人造板及饰面人造板理化性能试验方法》中Ⅰ类胶合板的强度要求。     

疏水改性阳离子聚丙烯酰胺絮凝剂的制备及其絮凝性能

通过水溶液共聚合法,以丙烯酰胺(AM)、丙烯酰氧乙基三甲基氯化铵(DAC)和2-乙烯基吡啶(2-VP)为共聚单体合成了疏水改性阳离子聚丙烯酰胺P(AM-DAC-2VP),并用红外光谱仪和核磁共振光谱仪对其结构进行了表征。实验结果表明:当w(2-VP)为1.0%、w(DAC)为30%、活性污泥pH为5、P(AM-DAC-2VP)加入量为25mg/L时,P(AM-DAC-2VP)对本实验的活性污泥絮凝能力最强,上清液透光率为92.1%;P(AM-DAC-2VP)比同条件下制备的阳离子聚丙烯酰胺P(AM-DAC)具有更好的絮凝效果。     

三元乙丙橡胶超细纤维复合膜的制备及其截留性能

以四氢呋喃和N,N-二甲基甲酰胺为溶剂,配制三元乙丙橡胶(EPDM)纺丝液,通过静电纺丝技术制备了EPDM超细纤维,进而以聚偏氟乙烯(PVDF)微滤膜为基膜制备了EPDM超细纤维复合膜。采用红外光谱(FTIR)和扫描电子显微镜(SEM)对EPDM超细纤维的结构和形态进行了表征。考察了复合膜对苯乙烯废水的截留效果和复合膜通量的变化情况。实验结果表明:EPDM超细纤维具有类似无纺布形式的多孔纤维网状结构,其直径在0.2~2.0μm之间;复合膜在操作压力为0.1MPa的条件下,处理质量浓度为100μg/mL的模拟苯乙烯废水,膜通量约为5.90mL/(cm2.h),苯乙烯去除率可达89.7%。     

Fe2O3/膨润土微波诱导氧化处理染料废水

以膨润土为载体,采用直接沉淀法制备了Fe2O3/膨润土负载型催化剂。制备催化剂的最佳工艺条件:硝酸铁质量浓度为8.08g/L,硝酸铁与膨润土质量比为1.0,焙烧温度为350℃,焙烧时间为3h。用Fe2O3/膨润土负载型催化剂微波诱导氧化处理50mL质量浓度为50mg/L的模拟活性嫩黄废水的最佳工艺条件:催化剂加入量为0.5g,微波功率为900W,微波作用时间为5min。在此条件下模拟活性嫩黄废水脱色率达96.40%。微波诱导氧化处理模拟活性嫩黄废水的反应符合一级反应动力学方程。     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。