中空纤维微滤膜污染及阻力分析

选用0．1μm的PVDF中空纤维内压式微滤膜组件，在死端微滤工况下，研究了酵母（平均粒径5．3μm）和高岭土（平均粒径0．7μm）体系在浓度和压力变化时的污染机理及过滤阻力、膜渗透通量的变化规律性。通过恒压堵塞定律积分式的具体形式与实验数据的拟合及根据堵塞过滤定律计算的结果都表明：死端微滤时，酵母体系和高岭土体系均符合滤饼过滤机理。     

膜生物反应器处理微污染水源水的研究与应用现状

膜生物反应器及其组合工艺能实现水源水中微污染物的有效去除,是一种新型高效水处理工艺.总结了膜生物反应器处理微污染水源水的研究与应用现状、污染物去除效果和机制;在分析膜污染机制基础上归纳了膜污染控制和污染膜清洗方式,展望了膜生物反应器在给水领域应用需克服解决的技术难点.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

水葱修复土壤镉污染潜力的研究

野外观察与研究发现水葱(Scirpus tabernaemontani G.)可以耐受土壤中高浓度的重金属污染,并对镉(Cd)有很高的生物富集量.实验室水培试验研究了两个主要因素,营养液pH与Cd含量,对水葱生物量以及Cd富集效果的影响.结果表明,它可耐受高浓度Cd (30 mg/L)和大范围pH变化 (3.7～7.7).当营养液pH为4.7, Cd为25 mg/L时,水葱富集的Cd达到最大值:地上部分264.71 mg/kg,地下部分234.39 mg/kg,平均转运系数1.13.这显示了它用于植物修复Cd污染土壤的潜力.     

青霉菌HHE-P7利用酱油废水产生微生物絮凝剂的研究

研究了微生物絮凝剂产生菌HHE-P7在酱油废水中产生微生物絮凝剂的絮凝特性。实验表明，酱油废水由于碳源丰富，是一种良好的培养基。HHE-P7菌最佳培养条件为：COD20000mg／L，K2HP041．0g／L，培养3d。最佳絮凝条件为在1L高岭土水中投加10～15mL微生物絮凝剂（MBF7），pH调至9，则絮凝率为90％以上；微生物絮凝荆在水系中主要起吸附架桥的作用。     

Ag~+改性复合钛铌酸钾盐对二甲基硫醚和乙硫醇吸附与光催化氧化研究

采用高温固相法合成具有不同Nb/Ti摩尔比的复合钛铌酸钾盐,通过Ag+离子交换对其进行改性。在静态下评价了Ag+改性复合钛铌酸钾盐对二甲基硫醚(DMS)和乙硫醇(EM)的吸附与紫外光催化氧化作用,使用红外光谱技术对催化剂表面滞留物种进行表征。结果表明,Ag+改性复合钛铌酸钾盐对DMS的吸附作用力比EM弱。随着Nb/Ti摩尔比增加,Ag+改性复合钛铌酸钾盐对EM的吸附作用力增强。在紫外光辐射下,Ag+改性的复合钛铌酸钾盐将DMS氧化为亚砜、砜和硫酸盐,而EM则被氧化为磺酸和单齿硫酸盐。     

竹炭-微生物联合法对沼液中氨氮的去除

采用竹炭-微生物联合法,考察了竹炭用量、菌液用量、进水氨氮浓度、pH、DO、HRT等因素对氨氮废水处理效果的影响;同时采用对比实验,初步探讨了竹炭-微生物联合法处理沼液的作用机理。结果表明,竹炭-微生物法去除沼液氨氮的最优条件推荐为:竹炭用量30 g/L,微生物活性液用量3%,pH 7.0～8.0,DO为2 mg/L,HRT为48 h。竹炭-微生物法对沼液氨氮的去除过程可用一级反应动力学模型C=272.56e-0.0148描述,其去除效果来源于竹炭吸附和生物降解的协同作用,协同程度为48.45%。     

环渤海湾诸河口水质现状的分析

根据对环渤海湾诸河口实地采集的12个水样进行的重金属、砷、总氮和总磷含量分析，发现环渤海湾诸河口水污染严重，多超过地表水V类标准，主要污染物质为Hg、N和P，其他污染物含量均在地表水H类标准以内。其中海河口处的Hg含量在20年间增加了10倍左右。诸河口水体中N和P含量均达到水体富营养化危险负荷，可见陆源污染是渤海湾富营养化日趋严重、赤潮日趋增多的主要原因。     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.     

Comparative quantification of oxygen release by wetland plants: electrode technique and oxygen consumption model

Understanding oxygen release by plants is important to the design of constructed wetlands for wastewater treatment. Lab-scale systems planted with Phragmites australis were studied to evaluate the amount of oxygen release by plants using electrode techniques and oxygen consumption model. Oxygen release rate (0.14 g O₂/m²/day) measured using electrode techniques was much lower than that (3.94–25.20 gO₂/m²/day) calculated using the oxygen consumption model. The results revealed that oxygen release by plants was significantly influenced by the oxygen demand for the degradation of pollutants, and the oxygen release rate increased with the rising of the concentration of degradable materials in the solution. The summary of the methods in qualifying oxygen release by wetland plants demonstrated that variations existed among different measuring methods and even in the same measuring approach. The results would be helpful for understanding the contribution of plants in constructed wetlands toward actual wastewater treatment.