Diffusion of radionuclides in concrete and concrete-bentonite systems

Various construction materials are under consideration for nuclear waste repositories. Two important materials are concrete and bentonite clay, which will act as mechanical barriers and prevent convective water flow. These barriers will also retard transport (diffusion controlled) of dissolved radionuclides by a combination of mechanical constraints and chemical interactions with the solid.An important issue is the possible change of the initial sodium bentonite into the calcium form due to interaction with calcium from the concrete. The initial leaching of concrete was studied using radioactive spiked concrete in contact with compacted bentonite.Measurement were made of the diffusion of Cs, Am and Pu into 5 different types of concrete in contact with pore water. The diffusivity measured for Cs agrees reasonably well with data found in the literature. No movement could be measured for Am and Pu (< 0.2 mm), even though the contact times were extremely long (2.5 and 5 yr, respectively). The diffusion of Na, Ca and Cs from concrete into bentonite was also measured.     

Screening of lead exposure among workers in Selangor and Federal Territory in Malaysia

The study of lead exposure among workers in Selangor and the Federal Territory was carried out based on the delta-aminolevulinic acid (ALA) level in urine. Occupations which are expected to have higher lead exposure were chosen in this research. The ALA level in the workers' urine was linked to a few variables which may contribute to the lead level in the body. The result of this study showed that the ALA level of the urine of university students (0.352 +/- 0.038 mg/100 ml) < clerical staff (0.560 +/- 0.043 mg/100 ml) < traffic police (0.612 +/- 0.064 mg/100 ml) < vehicle workshop workers (0.673 +/- 0.099 mg/100 ml) < petrol kiosk workers (0.717 +/- 0.069 mg/100 ml) < bus drivers/conductors (0.850 +/- 0.055 mg/100 ml) which was similar to workers in the printing industry (0.852 +/- 0.110 mg/100 ml). The ALA levels in the urine of the exposed workers were significantly different from the control group (university students). However, results obtained from clerical staff revealed that they were also in the exposed group category. Analysis of variance showed that the exposed groups are in a population which is different from the control population. Correlation tests suggest that there is no significant connection between the ALA level in the urine and the variables tested. Furthermore, Duncan's Multiple Range Test showed no significant differences between the smoking/non smoking group, alcoholic/non-alcoholic group, race and sex (p > 0.05).     

Relationship between water solubility of chlorobenzenes and their effects on a freshwater green alga

The effective concentrations of benzene and 12 chlorobenzenes that reduced 50% of the primary productivity (EC₅₀) of a freshwater green alga, $\text{Ankistrodesmus falcatus}$, were determined. Benzene was the least toxic chemical and the toxicity increased as the degree of chlorine substitution in the aromatic ring increased. No EC₅₀ value could be obtained for HCB. A quantitative relationship was found to exist between water solubility, lipophilicity and the EC₅₀. A good correlation was also observed between the EC₅₀ for this alga and other toxicity data for various aquatic biota.     

Leaching study of polycyclic aromatic hydrocarbon bioavailability from a coal-derived solid product

The leaching behavior of selected four- to six-ring polycyclic aromatic hydrocarbons (PAH) from a tumorigenic coal-derived solid product was determined using three media to evaluate their potential bioavailabilities. Equilibrium PAH concentrations generally exceeded the aqueous solubilities after less than five days of leaching. PAH selectively accumulated in phospholipid vesicles at individual concentrations greater than 1 μg/g, which is ca. 100-fold over that in the bulk aqueous leachate. The results suggest that the PAH are quite bioavailable from the solid product, and that cell membranes can be exposed to considerable quantities of these PAH over an extended bioassay.     

Simulation of effects of atmospheric ethylene on tree leaf shedding

This study made a preliminary assessment of the possibility that ethylene contained in polluted atmospheres affects leaf shedding of trees. The effect of ethylene dosage (ppb x h) on leaf shedding at various temperatures was approximated by using a polynomial regression. The effect of ethylene dosage on shedding of tree leaves with various sensitivities to this hydrocarbon was simulated in connection with the relationship between ethylene concentrations (10-100 ppb), dosage periods (0-50 days) and temperature (10-30 degrees C). The simulated results indicated the possibility that, for the tree group having high sensitivity, the rate of leaf shedding due to a dosage of ethylene with a concentration as low as 20 ppb, which is commonly observed in urban atmospheres, increased with temperature. On the other hand, the same concentration scarcely influenced leaf shedding in the low sensitivity group even at a temperature as high as 30 degrees C. The results for the real atmosphere determined at the Tokyo metropolitan center indicated the possibility that, for trees having high sensitivity, the rate of leaf shedding increased with rises in both monthly ethylene concentrations and air temperatures and reached a maximum of 90% in July. But in December when the concentration again reached the same value as in July while the mean monthly air temperature was 9.3 degrees C, the rate was only 10%.     

Characteristics of aerosols collected in central Taiwan during an Asian dust event in spring 2000

Aerosol samples for PM(2.5) and PM(2.5-10) were collected at four locations in central Taiwan from 26 to 31 March 2000, a period that experienced exceedingly high PM levels from 29 to 30 March due to the passage of an Asian dust storm. The samples were analyzed for mass, metallic elements, ions, and carbon. The purpose of this paper is to investigate the influence of the dust storm on the characteristics of local ambient particulate matter. The results indicate that the concentrations of the crustal elements Ca, Mg, Al, Fe and the sea salt species Na+ and Cl- in PM(2.5-10) during the dust episode exceed the mean concentrations in the non-dust period by factors of 3.1, 2.9, 2.6, 2.2, 2.3 and 2.1 respectively. Enrichment factors of Ca, Fe, and Mg in PM(2.5-10) during the dust event are close to unity, indicating that these elements are from soil. Reconstruction of aerosol compositions revealed that soil of coarse particulates elevated approximately 50% in the dust event. It is noted that during the dust event, the ratio of Mg/Al in PM(2.5-10) ranged from 0.21 to 0.25 while that of Ca/Al ranged from 0.6 to 0.9, levels more constant than those obtained in non-dust period.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia

Four kinds of woods used for residential heating in Australia were selected and burned under two burning conditions in a domestic wood heater installed in a laboratory. The selected wood species included pine (Pinus radiata), red gum (Eucalvptus camaldulensis), sugar gum (Eucalyptus cladocalyx) and yellow box (Eucalyptus melliodora). The two different burning conditions represented fast burning and slow burning, with the air inlet of the combustion chamber respectively 'full open' and 'half open'. By sampling and analysing particulate and gaseous emissions from the burning of each load of wood under defined experimental conditions, PAHs emissions and their profiles in the particulate and gaseous phases were obtained. 16 species out of the 18 selected PAHs were detected. Of these, seven species were detected in the gaseous phase and most were lower molecular weight compounds.Similarly, more than 10 species of PAHs were detected in the particulate phase and these were mostly heavier molecular weight compounds. Under both burning conditions, emission levels for total PAHs and total genotoxic PAHs were the highest for pine and lowest for sugar gum, with red gum being the second highest, followed by yellow box. Using the specific sampling method, gaseous PAHs accounted for above 90% mass fraction of total PAHs in comparison to particulate PAHs (10%). The majority of the genotoxic PAHs were present in the particulate phase. PAHs emission levels in slow burning conditions were generally higher than those in fast burning conditions.     

Reductive dechlorination of polychlorinated biphenyls as affected by sediment characteristics

The effect of sediment sources on the selection of polychlorinated biphenyl (PCB) dechlorinating competence was investigated using sediments from two different locations, the Grasse River and Owasco Lake. These two sediments had a similar organic carbon content but different particle size distribution. The two PCB-free sediments were spiked with Aroclor 1248 and inoculated with microorganisms from the Reynolds and General Motors sites in the St. Lawrence River, which exhibited different dechlorination patterns. When each inoculum was serially transferred into fresh sediments four times (every 8-10 weeks), they still maintained the initial dechlorination patterns regardless, the source of sediments and the number of transfers, and dechlorination patterns of the two inocula in the same sediments did not converge. In a parallel approach, when the acclimated microorganisms from the Reynolds site were inoculated into fresh sediments from both sources as well as sediments enriched with organic carbon (2%, w/v), the dechlorination pattern remained unchanged after a 40-week incubation. These results suggest that the sediment characteristics or organic carbon content did not play a role in the selection of dechlorinating populations.     

PCDD and PCDF exposures in workers and controls living near an industrial waste incinerator

This study measured the levels of 17 congeners of PCDDs/PCDFs in serum to compare the levels between potentially exposed workers at an industrial waste incinerator and any residents with no known exposures. The 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD were detected in serum of workers but in controls. Likewise, 1,2,3,7,8-PeCDF, 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDF were detected only in serum of workers. The international toxic equivalent (TEQ) levels of PCDDs/PCDFs in sera of workers are much higher than in controls. Among PCDDs, the proportion of total concentration and TEQ level is dominated predominantly by 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD. We need extensive studies to estimate human exposure and are continuing this investigation.