Changes in persistent contaminant concentration and CYP1A1 protein expression in biopsy samples from northern bottlenose whales, Hyperoodon ampullatus, following the onset of nearby oil and gas development

A small population of endangered northern bottlenose whales (Hyperoodon ampullatus) inhabits "The Gully" a Marine Protected Area on the Scotian Shelf, eastern Canada. Amid concerns regarding nearby oil and gas development, we took 36 skin and blubber biopsy samples in 1996-1997 (prior to major development) and 2002-2003 (five years after development began), and three samples from a population in the Davis Strait, Labrador in 2003. These were analysed for cytochrome P4501A1 (CYP1A1) protein expression (n=36), and for persistent contaminants (n=23). CYP1A1 showed generally low expression in whales from The Gully, but higher levels during 2003, potentially coincident with recorded oil spills, and higher levels in Davis Strait whales. A range of PCB congeners and organochlorine compounds were detected, with concentrations similar to other North Atlantic odontocetes. Concentrations were higher in whales from The Gully than from the Davis Strait, with significant increases in 4,4'-DDE and trans-nonachlor in 2002-2003 relative to 1996-1997.     

Bulk deposition of polycyclic aromatic hydrocarbons (PAHs) in an industrial site of Turkey

Ambient air and deposition samples were collected in the period of July 2004-May 2005 in an industrial district of Bursa, Turkey and analyzed for polycyclic aromatic hydrocarbon (PAH) compounds. The overall average of fourteen bulk deposition fluxes for PAHs was 3300+/-5100 ng m(-2) d(-1). PAH depositions showed a seasonal variation and they were higher in winter months. This was probably due to increases in residential heating activities and decreases in atmospheric mixing layer levels. Ambient air samples, measured with a high volume air sampler, were collected from the same site. The average total concentration including gas and particulate phase was about 300+/-420 ng m(-3) and it was in the range of previously reported values. Some of the ambient air and bulk deposition samples were collected simultaneously in dry periods. Both concurrently measured values were used to calculate the dry deposition velocities whose overall average value was 0.45+/-0.35 cm s(-1).     

Feasibility of phytoextraction to remediate cadmium and zinc contaminated soils

A Cd and Zn contaminated soil was mixed and equilibrated with an uncontaminated, but otherwise similar soil to establish a gradient in soil contamination levels. Growth of Thlaspi caerulescens (Ganges ecotype) significantly decreased the metal concentrations in soil solution. Plant uptake of Cd and Zn exceeded the decrease of the soluble metal concentrations by several orders of magnitude. Hence, desorption of metals must have occurred to maintain the soil solution concentrations. A coupled regression model was developed to describe the transfer of metals from soil to solution and plant shoots. This model was applied to estimate the phytoextraction duration required to decrease the soil Cd concentration from 10 to 0.5 mg kg⁻¹. A biomass production of 1 and 5 t dm ha⁻¹ yr⁻¹ yields a duration of 42 and 11 yr, respectively. Successful phytoextraction operations based on T. caerulescens require an increased biomass production.     

Relationship between atmospheric pollution processes and synoptic pressure patterns in northern China

The air pollution index (API) sequences in 10 cities in northern China and the synoptic pressure patterns during autumn and winter from 2002 to 2006 were analyzed with diagnostic and statistical methods. The results showed that the air qualities in northern China had a prominent correlation with the pressure systems. It revealed that (a) the increasing phase of API was associated with high pressure and the successive low pressure, (b) the preceding part of front (i.e. the retral part of low pressure) was associated with the maximum of API values during a cycle of air pollution process, (c) the pressure systems with high gradient led to the decrease of API, and (d) the synoptic pressure patterns and their evolvements were the main causes of regional air pollution processes. These relations can be used to analyze the variation characteristics and mechanism of regional atmosphere pollution process, and provide important basis for the qualitative prediction, control, and management of regional air pollution problems.     

Vitrification of bottom ash from a municipal solid waste incinerator

During incineration of municipal solid waste (MSW), various environmentally harmful elements and heavy metals are liberated either into bottom ash, or carried away with the off-gases and subsequently trapped in fly-ash. If these minor but harmful elements are not properly isolated and immobilized, it can lead to secondary environmental pollution to the air, soil and water. The stricter environmental regulations to be implemented in the near future in The Netherlands require a higher immobilization efficiency of the bottom ash treatment. In the present study, MSW incinerator bottom ash was vitrified at higher temperatures and the slag formed and metal recovered were examined. The behaviour of soluble elements that remain in the slag is evaluated by standard leaching test. The results obtained can provide a valuable route to treat the ashes from incinerators, and to make recycling and more efficient utilization of the bottom ash possible.     

Performance of industrial by-products in controlled low-strength materials (CLSM)

As the construction industry continues to recognise the importance of sustainable development, technologies such as controlled low-strength material (CLSM) have come to the forefront as viable means of safely and efficiently using by-product and waste materials in infrastructure applications. CLSM, also known as flowable fill, can be defined as an engineered backfill material containing fine aggregates, Portland cement, water and a by-product material. CLSM can provide an economically and technically feasible alternative to conventional fill materials because of potential cost savings related to its unique and often superior technical properties. In this present experimental study, three industrial by-products, namely fly ash (FA), rice husk ash (RHA) and quarry dust (QD), were used as constituent materials in CLSM. Mixture proportions were developed for CLSM containing these industrial by-products and were tested in the laboratory for various properties, such as flowability, unconfined compressive strength (UCS), stress-strain behaviour, density, water absorption and volume changes. Comparison between the two pozzolanic materials, namely FA and RHA, for their potential to produce an effective CLSM has been made. It can be observed from the results that by-product materials such as FA, RHA and QD can be successfully used in CLSM. This successful utilization of by-product materials is important to sustainable development and is the focus of this research.     

An inexact multi-objective dynamic model and its application in China for the management of municipal solid waste

With the development of science and technology, solid waste management has become a serious environmental problem for most communities all over the world. This paper presents a multi-objective optimization model for the management of municipal solid waste (MSW) via an uncertainty approach. In this model, the system cost of solid waste management and the environmental impact are considered as the main objectives, and some necessary constraints based on the characteristics of China are included; additionally, Pollution loss theory is applied to evaluate the environmental impact.This model is applied to the City of Fo Shan, China. Compared with the primary project of Fo Shan, which is provided by the government, the results of the optimization procedure show that the overall system cost could be reduced by $1–2.4/ton, i.e., $3.7 million/yr. The model presented in this paper was proven to be an effective response to the multi-objective solid waste management problem, and provides a new technique to optimize MSW management and operation. Why is the optimization result better? By analyzing the modelling with respect to function, constraints, and results, we conclude that the profit would be augmented due to the amount of the waste that would be treated by recycling technology, which would increase rapidly during the planning time; thus, the total system cost could be reduced accordingly.     

Effect of Rainfall Regime and Slope on Runoff in a Gullied Loess Region on the Loess Plateau in China

Runoff was measured from seven plots with different slopes nested in Tuanshangou catchment on the Loess Plateau to study effect of slopes on runoff in relation to rainfall regimes. Based on nine years of field observation and K-mean clusters, 84 rainfall events were grouped into three rainfall regimes. Rainfall regime A is the group of events with strong rainfall intensity, high frequency, and short duration. Rainfall regime C consists of events with low intensity, long duration, and infrequent occurrence. Rainfall regime B is the aggregation of events of medium intensity and medium duration, and less frequent occurrence. The following results were found: (1) Different from traditional studies, runoff coefficient neither decreased nor increased, but presented peak value on the slope surfaces; (2) For individual plot, runoff coefficients induced by rainfall regime A were the highest, and those induced by rainfall regime C were the lowest; Downslope, the runoff coefficients induced by three rainfall regimes presented the same changing trend, although the peak value induced by regime A occurred on a shorter slope length compared to those by regime B and C; (3) Scale effect on runoff induced by rainfall regime A was the least, and that induced by rainfall regime C was the largest. These results can be explained by the interactions of crusting, soil moisture content, slope length and gradient, and erosion units, etc., in the context of different rainfall regimes.     

Zinc and cobalt phytoextraction by different plant species

Plant species sorghum (Sorghum vulgar L.), clover (Trifolium pratense L.), panikum (Panicum antidotal), and canola (Brassica napus) were tested to determine their phytoremediation potential. After a period of about 90 days, plant samples (shoots and roots) and soil samples (before and after cultivation) were collected for zinc and cobalt analyses using atomic absorption spectrometry. The highest zinc uptake was observed in canola, while panikum grass showed a high zinc accumulation affinity compared to sorghum and clover. Calculation of the recovery percentage, based on the amount of zinc removed from the soil after cultivation, ranged between 12.8 and 36.3 percent of the total initial zinc. Canola shoots exhibited the highest cobalt uptake compared to the other plant species. Calculation of the recovery percentage based on cobalt removed from the soil after cultivation ranged between 10.1 and 40.7 percent of the total initial cobalt concentration. © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Predicting organic contaminant concentrations in sediment porewater using solid-phase microextraction

Because of its cost and time saving features, solid-phase microextraction (SPME) is a leading candidate as a biomimic technique in assessing the bioavailable fraction of hydrophobic organic contaminants (HOCs) in sediment porewater. However, no predictive modeling framework in which to systematically address the effect of key parameters on SPME performance for this application exists. In this study, we derived two governing equations to predict (1) the minimum sediment volume (V(s)min) required to achieve non-depletive conditions, and (2) dissolved phase HOC porewater concentrations (C(pw)) as functions of HOC- and sediment specific characteristics in a conceptual three compartment system. The resulting model predicted that V(s)min was independent of HOC concentrations both in sediment and porewater, but did vary with hydrophobicity (characterized by logK(ow)), the fraction of sediment porewater (f(pw)), and the volume (V(f)) of the SPME sorbent phase. Moreover, the effects of these parameters were minimized (i.e., V(s)min reached plateaus) as logK(ow) approached 4-5. Model predictions of C(pw), a surrogate for SPME-based detection limits in porewater, decreased with increasing sediment volume (V(s)) at low V(s) values, but rapidly leveled off as V(s) increased. A third result suggested that the sediment HOC concentration required for SPME is completely independent of K(ow). These results suggest that relatively small sediment volumes participate in exchange equilibria among sediment, porewater and the SPME fiber, and that large sediment HOC reservoirs are not needed to improve the detection sensitivity of SPME-based porewater samplers. The ultimate utility of this modeling framework will be to assist future experimental designs and help predict in situ bioavailability of sediment-associated HOCs.