Degradation of di-butyl-phthalate by soil bacteria

Twelve Gram-positive phthalate ester degraders were isolated from soil. Using Biolog GP2 plates, eight of them were identified as belonging to the Corynebacterium-Mycobacterium-Nocardia group, while the remaining four were unidentifiable. When cultured in the presence of di-butyl-phthalate (DBP) in basal salts solution, five of these isolates accomplished more than 90% of DBP degradation within 48 h (fast group), three were placed in the medium group, and the remaining four were placed in the slow group which caused less than 30% of DBP degradation within the same period of time. A 420 bp DNA fragment was amplified from six isolates and none of them fell within the slow group. When compared with the large subunit of phthalate dioxygenase gene (phtA) of Arthrobacter keyseri, 83% and 91% similarities were evident in the nucleotide and amino acid sequences, respectively. However, no correlation between cell surface hydrophobicity and phthalate degradation ability was evident. Six surfactants (Brij 30, Brij 35, Tergitoltype NP-10, Triton N-101, Triton X-100 and SDS) were tested for their abilities to increase degradation rate. When added at the critical micellar concentration (CMC), they all displayed strong growth inhibition against the three bacteria tested, with Brij 30 been the least toxic to isolates G2 and G11, and Brij 35 had the least inhibitory effect for G1. When half the CMC of Brij 30 was incorporated into the basal salts, the inhibitory effect on DBP degradation remained. Soil helped to minimize surfactant toxicity of surfactant and increase the degradation potential of some of the test bacteria. When DBP-amended soil had been aged for three months, decreases in bioavailability were observed but the effect varied tremendously between different organisms. For isolates G1, G2, G5, G7 and G17 the aging effects were almost non-exist. The present study indicates that selection of a suitable degrader may minimize the undesired effect of aging on bioremediation process.     

Application of a constructed wetland for industrial wastewater treatment: a pilot-scale study

The main objective of this study was to examine the efficacy and capacity of using constructed wetlands on industrial pollutant removal. Four parallel pilot-scale modified free water surface (FWS) constructed wetland systems [dimension for each system: 4-m (L)x1-m (W)x1-m (D)] were installed inside an industrial park for conducting the proposed treatability study. The averaged influent contains approximately 170 mg l(-1) chemical oxygen demand (COD), 80 mg l(-1) biochemical oxygen demand (BOD), 90 mg l(-1) suspend solid (SS), and 32 mg l(-1) NH(3)-N. In the plant-selection study, four different wetland plant species including floating plants [Pistia stratiotes L. (P. stratiotes) and Ipomoea aquatica (I. aquatica)] and emergent plants [Phragmites communis L. (P. communis) and Typha orientalis Presl. (T. orientalis)] were evaluated. Results show that only the emergent plant (P. communis) could survive and reproduce with a continuous feed of 0.4m(3)d(-1) of the raw wastewater. Thus, P. communis was used in the subsequent treatment study. Two different control parameters including hydraulic retention time (HRT) (3, 5, and 7d) and media [vesicles ceramic bioballs and small gravels, 1cm in diameter] were examined in the treatment study. Results indicate that the system with a 5-d HRT (feed rate of 0.4m(3)d(-1)) and vesicles ceramic bioballs as the media had the acceptable and optimal pollutant removal efficiency. If operated under conditions of the above parameters, the pilot-plant wetland system can achieve removal of 61% COD, 89% BOD, 81% SS, 35% TP, and 56% NH(3)-N. The treated wastewater meets the current industrial wastewater discharge standards in Taiwan.     

Polycyclic aromatic hydrocarbons (PAHs) in the aerosol in Beijing, China, measured by aminopropylsilane chemically-bonded stationary-phase column chromatography and HPLC/fluorescence detection

We developed a useful analytical method for the determination of polycyclic aromatic hydrocarbons (PAH) concentrations in the aerosol of China. We used an accelerated solvent extraction (ASE) method for the extraction of PAHs from the aerosol samples, in order to reduce the extraction time and the solvent volume used. The optimum purification method was developed, with aminopropylsilane chemically-bonded stationary-phase column chromatography, in order to remove many co-extractives which cannot be removed by conventional purification methods using silica-gel column chromatography. HPLC/fluorescence detection (FLD) was adopted as the analytical method, because it has very high sensitivity to PAH and it is easy to install, operate, and maintain as compared with GC/MS. With the analytical method developed in this study, the recovery and precision (RSD) for most of the PAHs ranged from 75% to 129% and from 2.8% to 22.7%, respectively. The concentrations of PAHs in the aerosol samples collected from October 2003 to April 2005 in Beijing, China were determined using the newly developed method. SigmaPAHs, which is the sum of the concentrations of all detected PAHs, was 177.8 +/- 239.9 ng m(-3) (n = 64). The SigmaPAHs concentration in the heating season (305.1 +/- 279.0 ng m(-3), n = 33) was 7.2 times higher than that in the non-heating season (42.3 +/- 32.0 ng m(-3), n = 31). These strong seasonal variations in atmospheric PAH concentration are possibly due to coal combustion for residential heating in winter.     

A robust approach for iterative contaminant source location and release history recovery

Contamination source identification is a crucial step in environmental remediation. The exact contaminant source locations and release histories are often unknown due to lack of records and therefore must be identified through inversion. Coupled source location and release history identification is a complex nonlinear optimization problem. Existing strategies for contaminant source identification have important practical limitations. In many studies, analytical solutions for point sources are used; the problem is often formulated and solved via nonlinear optimization; and model uncertainty is seldom considered. In practice, model uncertainty can be significant because of the uncertainty in model structure and parameters, and the error in numerical solutions. An inaccurate model can lead to erroneous inversion of contaminant sources. In this work, a constrained robust least squares (CRLS) estimator is combined with a branch-and-bound global optimization solver for iteratively identifying source release histories and source locations. CRLS is used for source release history recovery and the global optimization solver is used for location search. CRLS is a robust estimator that was developed to incorporate directly a modeler's prior knowledge of model uncertainty and measurement error. The robustness of CRLS is essential for systems that are ill-conditioned. Because of this decoupling, the total solution time can be reduced significantly. Our numerical experiments show that the combination of CRLS with the global optimization solver achieved better performance than the combination of a non-robust estimator, i.e., the nonnegative least squares (NNLS) method, with the same solver.     

Metals leachability from medical waste incinerator fly ash: A case study on particle size comparison

This paper presents the results from a study of metals leachability of medical waste incinerator fly ash in Japan on the basis of particle size. Sequential extraction and Toxicity Characteristic Leaching Procedure (TCLP) analysis were carried out in order to quantify the leaching amount of metals in each categorized particle size. Sequential extraction was also subjected to identify the preference of binding matrix of metals. The results of sequential extraction showed an increase both exchangeable and carbonate associated chromium concentrations in the bigger particle size fractions. Likewise, concentrations of carbonate matrix of arsenic and tin tended to increase in the bigger particle size fractions. In contrast, exchangeable associated cadmium as well as both exchangeable and carbonate matrices of barium were found higher in the smaller particle size fractions. However, no correlation was found in Kendal-tau correlation analysis between particle size of the ash and metals leachability of the TCLP.     

Florida's weakened motorcycle helmet law: effects on death rates in motorcycle crashes

OBJECTIVES: Effective July 1, 2000, Florida's universal helmet law was amended to exclude riders ages 21 and older with insurance coverage providing at least 10,000 US dollars in medical benefits for injuries sustained in a motorcycle crash. Observed helmet use in Florida was reported to have declined from nearly 100% in 1998, before the law change, to 53% after. This study examined the effects of the law change on the likelihood of death, given involvement in a motorcycle crash. METHODS: Rates of motorcyclist deaths per crash involvement in Florida for 2001-2002 (after the law change) were compared with those for 1998-1999 (before the law change). Before/after death rate ratios (95% CIs) were examined, and logistic regression models estimated the effect of the helmet law change on the odds of death in a crash, while controlling for rider gender, age, and seating position, and number of vehicles. RESULTS: The motorcyclist death rate increased significantly after the law change, from 30.8 to 38.8 deaths per 1,000 crash involvements. Motorcyclist death rates increased for single- and multiple-vehicle crashes, for male and female operators, and for riders of all ages including those younger than 21. After controlling for gender and age, the likelihood of death given involvement in a motorcycle crash was 25% higher than expected after the law change. It is estimated that 117 motorcyclist deaths could have been avoided during 2001-2002 if Florida's universal helmet law had remained in place. CONCLUSIONS: This study provides evidence of the life-saving benefits of universal helmet laws. The results also suggest that age-specific helmet laws are not effective in protecting the youngest drivers. This is not surprising, as these laws are largely unenforceable.     

Influence of air-sea fluxes on chlorine isotopic composition of ocean water: implications for constancy in delta37Cl--a statistical inference

The behaviors of chlorine isotopes in relation to air-sea flux variables have been investigated through multivariate statistical analyses (MSA). The MSA technique provides an approach to reduce the data set and was applied to a set of 7 air-sea flux variables to supplement and describe the variation in chlorine isotopic compositions (delta37Cl) of ocean water. The variation in delta37Cl values of surface ocean water from 51 stations in 4 major world oceans--the Pacific, Atlantic, Indian and the Southern Ocean has been observed from -0.76 to +0.74 per thousand (av. 0.039+/-0.04 per thousand). The observed delta37Cl values show basic homogeneity and indicate that the air-sea fluxes act differently in different oceanic regions and help to maintain the balance between delta37Cl values of the world oceans. The study showed that it is possible to model the behavior of chlorine isotopes to the extent of 38-73% for different geographical regions. The models offered here are purely statistical in nature; however, the relationships uncovered by these models extend our understanding of the constancy in delta37Cl of ocean water in relation to air-sea flux variables.     

Limits of thermoluminescence dosimetry using quartz extracted from recent building materials in urban settlements

The luminescence of quartz extracted from recently fired building material is known to detect doses of few mGy and can be successfully employed in the case of large scale radiation exposures due to nuclear accidents or terrorist acts. One brick and two tiles (50-80 years range) collected from an urban settlement were used to test the realistic minimum detectable dose limits of retrospective luminescence dosimetry. Independent methods like alpha counting, beta dosimetry, gamma spectrometry and flame photometry were used for the annual dose assessment. Two approaches were employed for the evaluation of the total accrued dose: regenerative dose and additive dose. The former allows the assessment of doses due to anthropogenic sources of radiation as low as approximately 12 mGy by using 10-year-old samples, but it can be applied only in samples showing no sensitisation. The latter can be applied to any sample, however, the related uncertainty is higher and minimum detectable anthropogenic dose in young samples amounts to 20 mGy.     

Uptake of deuterium by dead leaves exposed to deuterated water vapor in a greenhouse at daytime and nighttime

Dead leaves were exposed to deuterated water vapor (D(2)O) as a substitute of tritiated water (HTO) in a greenhouse at daytime and nighttime to examine uptake and release of tritium by dead leaves because they cover a wide area of the forest floor and are therefore a major target material to be exposed when HTO is atmospherically derived to the forest. The dead cedar needles showed faster uptake and faster release rates during and after the exposure than the fresh ones, and the equilibrium concentration of the dead cedar needles was about two times higher than the fresh ones, indicating a quick response and a high buffering potential of dead leaves. The relation between uptake of D(2)O and number of stoma was examined for dead deciduous leaves; the species with larger number of stoma accumulated more D(2)O at the daytime and nighttime exposures. However, drying of the dead leaves suppressed D(2)O uptake greatly at daytime, suggesting stomata's opening and closing controls the D(2)O uptake of dead leaves.     

Anthropogenic radionuclides in sediment in the Japan Sea: distribution and transport processes of particulate radionuclides

Distributions of anthropogenic radionuclides ((90)Sr, (137)Cs and (239+240)Pu) in seabed sediment in the Japan Sea were collected during the period 1998-2002. Concentration of (90)Sr, (137)Cs and (239+240)Pu in seabed sediment was 0.07-1.6 Bq kg(-1), 0.4-9.1 Bq kg(-1) and 0.002-1.9 Bq kg(-1), respectively. In the northern basin of the sea (Japan Basin), (239+240)Pu/(137)Cs ratios in seabed sediment were higher and their variation was smaller compared to that in the southeastern regions of the sea. The higher (239+240)Pu/(137)Cs ratios throughout the Japan Basin were considered to reflect production of Pu-enriched particles in the surface layer and substantial sinking of particulate materials in this region. In the southern regions of the Japan Sea (<38 degrees N), both inventories and (239+240)Pu/(137)Cs ratios in sediment were larger than those in the other regions. In the southern Japan Sea, observations suggested that supply of particulate radionuclides by the Tsushima Warm Current mainly enhanced accumulation of the radionuclides in this region.