Recent advances in three typical configurations and applications of bioelectrochemical systems北大核心CSCD

As the world's freshwater resources and available energy are alarmingly decreasing, the bioelectrochemical system (BES) is a cutting-edge technology for the resolution of the resource and energy issue. Researchers have paid much attention to t he application of t he BES configuration. Based on t he brief i ntroduction of m icrobial f uel cell a nd m icrobial electrolytic cell structure, principles, and domestic and foreign research, the BES and its influencing factors are introduced, specifically including: microbial activity, electrode materials, and configuration. Three important aspects (i.e., the electrode chamber, the reaction chamber, and micro-sensor) are summarized, and the advantages and disadvantages of single-electrode and multi-electrode chambers are compared, based on the microbial desalination cell. Microbial electrolysis desalination cell: Microbial electrolysis desalination and chemical-production cell have been discussed to introduce increasing reaction chamber configuration; this review focuses on the research of BES monitoring with regards to biochemical oxygen demand. The potential applications of the research progress are explored. The results show that the configuration of multi-chamber microbial fuel cell is complex and its efficiency is low, while the single chamber configuration is advantageous. The reaction chamber added is mainly aimed at desalination, and the study of the desalination pool still needs to be focused on optimizing the cation exchange membrane to maintain the anode pH balance and reduce the air cathode dissolved oxygen. Microbial electrode sensor can be applied in more areas, and its sensitivity and long-term stability need to be further improved. However, there is relatively less research on the abundance and activity of electricigen communities; the configurations and scopes of application of BES are still the research priority. © 2018 Science Press. All rights reserved.     

Species diversity variation of Cupressus funebris secondary forest in landslide site after 5.12 Wenchuan Earthquake北大核心CSCD

The characteristics of species diversity in Cupressus funebris secondary forest under the effect of geological hazard were explored by selecting the typical landslide surface of Fenghuang Mountain, Leigu Town, Beichuan County, which was derived from the 5.12 Wenchuan earthquake. The results showed that 93 species belonged to 42 families, and 78 genera were found in the landslide area, where the main families were Compositae, Leguminosae, and Gramineae-based. Further, 97 species in the transition area belonged to 39 families and 80 genera, and the main families were Compositae, Gramineae, and Rosaceae-based. In all, 108 species were recorded in the non-landslide area, which belonged to 59 families and 92 genera, the main families of which were Compositae, Rosaceae, and Gramineae-based. Compositae and Gramineae played important roles in the landslide recovery process after earthquake. The Pielou index (JSW) was the highest in the non-landslide area of the herb layer, whereas the richness index (D) was the lowest; the Shannon-Wiener index (H) and Simpson index (H') showed medium values. In the non-landslide area, the D, H, and H' were the highest in the shrub layer, whereas the JSW was the lowest. Further, the species diversity index of the transitional area was higher than that of the landslide area. In the tree layer, the D and H were both the highest and lowest in the landslide area and transition area, respectively. In contrast, the H' and JSW were the highest in the transition area and the lowest in the non-landslide area. The distribution of vegetation was generally consistent with the distribution of soil nutrients in the spatial distribution of surface soil nutrients. The succession of trees in the landslide area was relatively slow and at the initial stage, and the pioneer species were Coriaria nepalensis, Leptopus chinensis, and Arthraxon lanceolatus in this area. Taken together, the findings suggested that the stability of a plant community can be increased by improving the soil and stabilizing the slope. © 2018 Science Press. All rights reserved.     

The interaction of heat shock proteins and some components of plant viruses北大核心CSCD

Considerable research has indicated that heat shock proteins (Hsp), as molecular chaperones, carry out many biological activities of plant viruses by folding, transporting, translocating, assembling, or degrading client proteins. It is fundamental to develop resistant plant varieties and novel anti-viral agents by determining the interaction mechanisms between plant viruses and hosts. In this study, we first reviewed the classification, gene and protein structure, and biological significances. We then analyzed the assembling mechanism of Hsp70 or Hsp90, plant host cofactors, and RNA-dependent RNA polymerases in a viral replicase complex, and the mechanism of interaction and subcellular localization between Hsp70 and some plant virus components. We highlighted the mechanism of interaction and movement between Hsp70 and some plant virus components and the effect of Hsp expression of plant hosts or viruses. The results indicated where the mechanism occurred, the participating factors, energy supply, and material conversion between Hsps and the plant virus components for the course of the intracellular movement, local movement between cells, and long-distance movement, and showed the Hsp type specificity and the law of dynamic Hsp expression in plant hosts infected by viruses. The studies mainly focused on the two Hsp factors and the plant viral components, indicating limited coordination mechanisms among many nucleic acids, proteins, and polysaccharides in macromolecular protein complexes (MRC). Future research should analyze the translocation mechanism between client proteins and Hsps, the coordination mechanism between Hsps and MRC components, and the relation between MRC and the plant tissue structure. © 2018 Science Press. All rights reserved.     

Effects of different mowing frequencies on soil carbon and nitrogen changes in leymus chinensis steppe of Hulun Buir北大核心CSCD

Mowing is the main management of Hulun Buir grasslands in Inner Mongolia; therefore, understanding the changes of soil organic carbon (SOC), total nitrogen (TN), and carbon sequestration under different mowing frequencies will provide an important scientific basis for grassland carbon sink management in Inner Mongolia. Three treatment plots were devised in the study area, including enclosed sample (Y), mowing every other year (2G), and mowing once a year (1G), where SOC, TN content and storage were investigated. The results showed that with increased mowing frequency, the SOC and TN content showed a decreasing trend in the 0-30 cm depth soil layer. The SOC and TN content were different in each soil layer, which decreased gradually with increasing soil depth in Y and 2G plots, whereas increased gradually in 1G plots. The soil carbon storage was significantly correlated with the soil nitrogen storage, and both showed a significant linear decrease with increased mowing frequency, which showed as carbon and nitrogen loss. In 2G plots, the soil carbon storage decreased by 17.1% and soil nitrogen storage decreased by 20.8%. In 1G plots, the soil carbon storage decreased by 21.6% and soil nitrogen storage decreased by 29.3%. The results showed that the change of soil carbon and nitrogen was sensitive to mowing frequency for the Hulun Buir grassland. It is possible to reduce the loss of carbon and nitrogen by reasonably controlling mowing frequency, and the sustainable use of grassland could be achieved with appropriate fertilization. Keywords. © 2018 Science Press. All rights reserved.     

Assessment of heavy metal pollution and health risks in a main river in Huayuan County,Xiangxi, Hunan Province北大核心CSCD

To study heavy metal pollution and assess the health risk of river water in Huayuan County, Xiangxi, Hunan Province, 11 water samples were collected from the Huayuan River and Brother Rivers in August and December 2016. Heavy metal (Pb, Zn, Cr, Cu, Fe, and Ni) concentrations were determined from the samples. The health risk assessment model recommended by the U.S. Environmental Protection Agency (USEPA) was applied to assess the health risk of heavy metals in the main surface waters of Huayuan County. The results indicated that the concentrations of heavy metals (Pb, Zn, Cr, Cu, Fe, and Ni) of surface water in the research area were 2.57 × 10-3, 4.66 × 10-4, 1.65 × 10-3, 6.27 × 10-4, 0.19, and 8.50 × 10-4 mg/L, respectively. The health risk of surface waters with heavy metals was high. Therefore, the chemical carcinogenic substance (Cr) health risk index was five or six times higher than that of chemical non-carcinogens (Pb, Zn, Cu, and Ni). The average health risk indices of non-carcinogenic substances were in the order Pb > Cu > Zn > Ni. The correlation and principal component analysis of surface water showed that the six heavy metal elements were composed of three main components in the main surface waters of the county. The first principal component was comprised of Fe and Ni (33.28%), which was mainly from internal pollution. The second component was comprised of Cu and Cr (26.98%), which was primarily due to industrial waste water, rainwater leaching mineral waste produced by heavy metal mining, and smelting enterprises. The third component, resulting from geochemical pollution, was Zn (17.10%). The health risk indices triggered by heavy metal in surface waters was high. Heavy metal pollutants in the research area need to be controlled in the order Cr, Pb, Cu, Zn and Ni. © 2018 Science Press. All rights reserved.     

Effect of iron addition on the performance of anoxic-oxic membrane process and biological phosphorus removal北大核心CSCD

In order to solve the problem of poor treatment of phosphorus in membrane bioreactor (MBR) with long sludge retention time (SRT), a ferric salt was added to enhance phosphorus removal; FeCl36H2O (Fe/P = 2.0) was added to the reactor. The removal efficiency of nitrogen, organic matters, and phosphorus in the MBR was investigated systematically. Moreover, this study focused on the membrane performance, the change of active sludge flora, and the effect of adding a ferric salt on membrane fouling before and after the addition. It was seen that adding the ferric salt could not affect the removal of COD and NH4 +-N and the removal rate of COD and NH4 +-N reached over 90%. However, the average removal rate of phosphorus was 52%, while the removal rate increased by nearly 40% after adding the ferric salt. The effects of adding ferric salts on the dominant bacteria and biological phosphorus removal of activated sludge were further studied. The results showed that the addition of ferric salt (Fe/P = 2.0) decreased the diversity of active sludge flora and relative abundance of some phosphorusaccumulating organisms and had a negative effect on biological phosphorus removal. The analysis of transmembrane pressure difference (TMP) recording revealed that the concentration of iron salts did not exacerbate membrane fouling. The results showed that the concentration of iron salts entering the membrane bioreactor would reduce the relative abundance and phosphorus removal efficiency of the activated sludge in the system to a certain extent, but it had no obvious effect on membrane fouling. It allowed the effluent to attain acceptable standards, especially with respect to phosphorus removal efficiency. © 2018 Science Press. All rights reserved.     

Energy reduction of a submerged membrane bioreactor using a polytetrafluoroethylene (PTFE) hollow-fiber membrane

The fiber length and packing density of the PTFE membrane element were increased. The MBR was stably operated under an SAD^m of 0.13 m³·m^-2·hr^-1. Specific energy consumption was estimated to be less than 0.4 kWh·m^-3. In this study, we modified a polytetrafluoroethylene (PTFE) hollow-fiber membrane element used for submerged membrane bioreactors (MBRs) to reduce the energy consumption during MBR processes. The high mechanical strength of the PTFE membrane made it possible to increase the effective length of the membrane fiber from 2 to 3 m. In addition, the packing density was increased by 20% by optimizing the membrane element configuration. These modifications improve the efficiency of membrane cleaning associated with aeration. The target of specific energy consumption was less than 0.4 kWh·m^-3 in this study. The continuous operation of a pilot MBR treating real municipal wastewater revealed that the MBR utilizing the modified membrane element can be stably operated under a specific air demand per membrane surface area (SAD_m) of 0.13 m³·m^-2·hr^-1 when the daily-averaged membrane fluxes for the constant flow rate and flow rate fluctuating modes of operation were set to 0.6 and 0.5 m³·m^-2·d^-1, respectively. The specific energy consumption under these operating conditions was estimated to be less than 0.37 kWh·m^-3. These results strongly suggest that operating an MBR equipped with the modified membrane element with a specific energy consumption of less than 0.4 kWh·m^-3 is highly possible.     

丙烯腈对小鼠精液运动参数的影响(Effects of Acrylonitrile on Sperm Motility in Male Mice)

为探讨丙烯腈(Acrylonitrile,AN)对雄性小鼠的生殖毒性作用机制,将250只SPF级昆明种雄性小鼠按体重随机分为5组:3个AN染毒组(1.25、2.50、5.00mg·kg-1)、1个阴性对照组(生理盐水0.01mL·g-1)和1个阳性对照组(环磷酰胺40mg·kg-1),腹腔注射染毒5d,每天1次.于初次染毒后第7、14、21、28、35d分五批处死小鼠,检测分析小鼠精子运动参数的变化.结果表明,5个观察终点各剂量组精液参数(精子密度、活动度、运动速度、运动方式参数、空间位移程度)变化与阴性对照均无显著差异(p>0.05).提示,在试验浓度范围内,AN对小鼠精子运动参数无影响.     

Simultaneous Removal of Cationic and Anionic Dyes from Binary Solutions Using Carboxymethyl Chitosan Based IPN Type Resin

Journal of Polymers and the Environment - In this study, a novel bead form IPN type resin comprising poly (2-Dimethylaminoethyl) methacrylate and carboxymethyl chitosan networks with a high dye...