14C-dimethoate residues in olive oil during oil processing

An olive tree was treated twice in the field with 14C-dimethoate (237.7 muCi, 2.4 g) and 14C residues were determined in the olive fruits at harvest. The fruits were crushed and pressed to extract the crude oil, then refined by neutralization, bleaching and deodorization. The crude oil contained 14.1% of the total 14C in the olive fruits. Neutralization resulted in a reduction of 14C by about 50% of the total 14C residues in oil. Bleaching and deodorization processes further reduced the 14C residues and the refined oil contained 31.6% (which corresponds to 4.4% of 14C residues of the total 14C in olive fruits) of the total 14C in the crude oil. Industrially extracted crude oil was fortified with 14C-dimethoate at 1.8 mg kg-1 (0.02 muCi) level and subjected to the same refining process. A sharp decrease in the amount of 14C was observed by neutralization and the amount of 14C remaining in the refined oil was about 7.3% of the total 14C in the crude fortified oil. The data suggest that the 14C residues in the aged and the fortified oil amples were not of the same nature. The terminal 14C residue in the refined oil obtained from the field experiment did not contain dimethoate and/or its oxon.     

Trace analysis of dissolved polychlorinated organic compounds in the water of the Yangtse River (Nanjing, China)

Eighteen organochlorine contaminants from the water samples of the Yangtse River have been qualitatively and quantitatively analyzed. The analysis of polychlorinated organic compounds (PCOCs) extracted by C18 Solid Phase Extract (SPE) was performed using HP6890 gas chromatograph coupled by ECD detector. The analytical results demonstrate that the analytical methods are reliable based on the fact that most of the recoveries for the targeted compounds are 60-90%. Most of the concerned contaminants, i.e. chlorinated pesticides and PCBs were found in the water samples of the Yangtse River, but their concentration was very low, <2.97 ng l(-1), which is far less than 1 microg l(-1)--the standard of drinking water of China. It is apparent that the PCOCs were in high concentration during the dry season, and in low concentration during the rainy season. The situation of PCOCs contamination in the water of the Yangtse River in 1999 was greatly improved in comparison with 10 years ago.     

Effects of leachate recirculation on biogas production from landfill co-disposal of municipal solid waste,sewage sludge and marine sediment

Leachate recirculation is an emerging technology associated with the management of landfill. The impact of leachate recirculation on the co-disposal of three major wastes (municipal solid waste, sewage sludge and sediment dredgings) was investigated using a laboratory column study. Chemical parameters (pH, COD, ammoniacal-N, total-P) and gas production (total gas volume, production rates and concentrations of CH4 and CO2) were monitored for 11 weeks. Leachate recirculation reduced waste-stabilization time and was effective in enhancing gas production and improving leachate quality, especially in terms of COD. The results also indicated that leachate recirculation could maximize the efficiency and waste volume reduction rate of landfill sites.     

Meteorological effects on the evolution of high ozone episodes in the greater Seoul area

Three high O3 episodes--7 days in 1992 (July 3-July 9), 9 days in 1994 (July 21-July 29), and another 3 days in 1994 (August 22-August 24)--were selected on the basis of morning (7:00 a.m.-10:00 a.m.) average wind direction and speed and daily maximum O3 concentrations in the greater Seoul, Korea, of 1990-1997. To better understand their characteristics and life cycles, surface data from the Seoul Weather Station (SWS) and surface and 850-hPa wind field data covering northeast Asia around the Korean Peninsula were used for the analysis. In the July 1992 episode, westerly winds were most frequent as a result of the influence of a high-pressure system west of the Korean Peninsula behind a trough. In contrast, in the July 1994 episode, easterly winds were most frequent as a result of the effect of a typhoon moving north from the south of Japan. Despite different prevailing wind directions, the peak O3 concentrations for each episode occurred when a sea/land breeze developed in association with weak synoptic forcing. The August 1994 episode, which was selected as being representative of calm conditions, was another typical example in which a well-developed     

Comparison of quantitation of polychlorinated dibenzodioxins and polychlorinated dibenzofurans in complex environmental samples by high resolution gas chromatography with flame ionization, electron capture and mass spectrometric detection

A complete separation of PDDD and PCDF from a complex sample matrix by a two-step HPLC clean-up procedure shows the feasibility of analysis of PCDD and PCDF using less expensive instruments. This is demonstrated by a comparison of quantitative results of PCDD and PCDF in a complex flyash sample analyzed using GC/FID, GC/ECD, and GC/MSD.     

An approach for treating the uncertainties in the impact of climate change

Past accumulated data supported by the predictions of climate models suggest that our world is getting warmer. Scientists are trying to construct mathematical models of both climate and crop systems to identify what types of climate changes could constitute a significant risk or benefit for agriculture. However, due to the many uncertainties regarding these models, it is impossible to make unequivocal predictions. At present, almost all the research in this area is carried out without considering the uncertain nature of the problem. The approach outlined here attempts to find a way to deal with the above uncertainty problem. Artificial intelligence techniques are being developed with the aim of performing inferences based on uncertain information. In our method, causal graphs are used for explicit representation of the relationships between climatic factors and yield. Probabilities are used to express the uncertainties associated with these links, and Bayes' theorem is applied to deal with uncertainty reasonings. This approach has the additional advantage of allowing the prediction to be readily updated as results from improved climate and crop models become available. These opportunities are being evaluated initially by using the model for potato growth developed at the Scottish Crop Research Institute.     

Microbial kinetic analysis of three different types of EBNR process

The disadvantages of developed biological nutrient removal (BNR) processes (additional energy for liquid circulation and addition of external carbon substrate for denitrification in anoxic zones) were improved by reconfiguring the process into (1) an anaerobic zone followed by multiple stages of aerobic-anoxic zones (TNCU3 process) or (2) anaerobic, oxic, anoxic, oxic zones in sequence (TNCU2 process). These two pilot plants were operated at a recycling sludge ratio of 0.5 without internal recycle of nitrified supernatant. The sludge retention time was maintained at 10 d. The main objective of this study is to analyze the kinetics of different microorganisms in these two processes and A2O process by using the Activated Sludge Model No. 2d. The effective removal efficiency of carbon, total phosphorus and total nitrogen at 87-98%, 92-100% and 63-80%, respectively, were achieved in the testing runs. According to model simulations, the microbial kinetics in the TNCU3 and TNCU2 processes would be affected by different operations. When the step feeding strategy was adopted, the HRT was longer due to the less influent flowrate in the front stages and the microbes would grow in quantities by about 6% in the aerobic reactors. In the followed anoxic reactors, the microbes would decrease in quantities by about 12% due to the dilution effect. The dilution effects in TNCU3 and TNCU2 processes did not take place in A2O process because the recycling mixed liquid from the aerobic reactor to the anoxic reactor still contained particulate components. The XH, XPAO, and XAUT concentrations in the effluent of the last tank were lower when the step-feeding mode was adopted. The TNCU3 and TNCU2 processes could be operated efficiently without nitrified liquid circulation and addition of external carbon substrate for denitrification.     

An unconventional approach to studying the reaction kinetics of the Fenton's oxidation of 2,4-dichlorophenoxyacetic acid

The Fenton's oxidation kinetics of herbicide 2,4-D at various [Fe(II)] and [H(2)O(2)] combinations was investigated and modelled through an unconventional approach. The reaction kinetics of 2,4-D degradation demonstrated a two-stage pattern of decay, where a very fast reactive stage was followed by a retardation stage due to the depletion of oxidants and to the competitive side-reactions of the intermediates (including 2,4-dichlorophenol, chlorohydroquinone and 2,6-dichlororesorcinol). A model characterized by two newly established constants, the initial decay rate and the maximum oxidative capacity, was proposed and proven capable of describing the two-stage process, which cannot easily be described by conventional first- or second-order kinetics approaches.     

Method development for determination of fluroxypyr in soil

Four methods were developed for the analysis of fluroxypyr in soil samples from oil palm plantations. The first method involved the extraction of the herbicide with 0.05 M NaOH in methanol followed by purification using acid base partition. The concentrated material was subjected to derivatization and then cleaning process using a florisil column and finally analyzed by gas chromatography (GC) equipped with electron capture detector (ECD). By this method, the recovery of fluroxypyr from the spiked soil ranged from 70 to 104% with the minimum detection limit at 5 microg/kg. The second method involved solid liquid extraction of fluroxypyr using a horizontal shaker followed by quantification using high performance liquid chromatography (HPLC) equipped with UV detector. The recovery of fluroxypyr using this method, ranged from 80 to 120% when the soil was spiked with fluroxypyr at 0.1-0.2 microg/g soil. In the third method, the recovery of fluroxypyr was determined by solid liquid extraction using an ultrasonic bath. The recovery of fluroxypyr at spiking levels of 4-50 microg/L ranged from 88 to 98% with relative standard deviations of 3.0-5.8% with a minimum detection limit of 4 microg/kg. In the fourth method, fluroxypyr was extracted using the solid liquid extraction method followed by the cleaning up step with OASIS HLB (polyvinyl dibenzene). The recovery of fluroxypyr was between 91 and 95% with relative standard deviations of 4.2-6.2%, respectively. The limit of detection in method 4 was further improved to 1 pg/kg. When the weight of soil used was increased 4 fold, the recovery of fluroxypyr at spiking level of 1-50 microg/kg ranged from 82-107% with relative standard deviations of 0.5-4.7%.