Atmospheric dry deposition fluxes of trace elements measured in Bursa, Turkey

Trace element dry deposition fluxes were measured using a smooth, greased, knife-edge surrogate surface (KSS) holding greased Mylar strips in Bursa, Turkey. Sampling program was conducted between October 2002 and June 2003 and 46 dry deposition samples were collected. The average fluxes of crustal metals (Mg, Ca, and Fe) were one to four orders of magnitude higher than the fluxes of anthropogenic metals. Trace element fluxes ranged from 3 (Cd) to 24,230 (Ca) microg m(-2) d(-1). The average trace element dry deposition fluxes measured in this study were similar to those measured in other urban areas. In addition, ambient air samples were also collected simultaneously with flux samples and concentrations of trace elements, collected with a TSP sampler, were between 0.7 and 4900 ng m(-3) for Cd and Ca, respectively. The overall trace element dry deposition velocities, calculated by dividing the fluxes to the particle phase concentrations ranged from 2.3+/-1.7 cm s(-1) (Pb) to 11.1+/-6.4 cm s(-1) (Ni). These values are in good agreement with the values calculated using similar techniques. The anthropogenic and crustal contributions were estimated by employing enrichment factors (EFs) calculated relative to the average crustal composition. Low EFs for dry deposition samples were calculated. This is probably due to contamination of local dust and its important contribution to the collected samples.     

Speciation of arsenic and chromium metal ions by reversed phase high performance liquid chromatography

The speciation of arsenic [As(III) and As(V)] and chromium [Cr(III) and Cr(VI)] was carried out by high performance liquid chromatography. The column used was Econosil C18 (250 x 4.6 mm i.d., particle size 10 microm). The mobile phases consisted of water-acetonitrile (80:20, v/v) for arsenic and 10 mM ammonium acetate buffer (6.0 pH)-acetonitrile (10:90, v/v) for chromium speciation separately and respectively. The detection was carried out by UV-Vis at 410 nm and atomic absorption spectrometer (AAS) respectively and separately. The values of alpha and Rs of As(III) and As(V) species were 1.4 and 1.5 respectively while the values of alpha and Rs for Cr(III) and Cr(VI) were 1.35 and 0.2 respectively. The effect of the acetonitrile percentages was also carried out on the speciation of arsenic only. The relative standard deviation and limit of detection were in the range of 0.01-0.02 and 0.4-1.0 microg/ml respectively.     

Enhancement of photocatalytic oxidation of humic acid in TiO2 suspensions by increasing cation strength

This study aimed at improving the photocatalytic (PC) oxidation of humic acids (HA) in TiO2 suspensions by adding cationic ion such as calcium or magnesium. A set of tests was first conducted in the dark to study the adsorption of HA onto TiO2 in suspensions at different pH and calcium concentrations. The experiment demonstrated that the adsorption of HA onto the TiO2 particles was either pH-dependent or calcium strength-dependent due to electrostatic interaction and calcium ion bridging. The photodegradation of HA in the presence of UV irradiation was investigated as a function of pH and the concentration of calcium and magnesium ions. The results showed that the adsorption behavior between HA and TiO2 played a very important role during the PC oxidation process. The PC oxidation could be enhanced at neutral pH by increasing the cation strength. The kinetics of HA PC degradation in TiO2 suspensions with different initial concentrations was also studied using the Langmuir-Hinshelwood model.     

A mechanism for mercury oxidation in coat-derived exhausts

This paper evaluates an elementary reaction mechanism for Hg0 oxidation in coal-derived exhausts consisting of a previously formulated homogeneous mechanism with 102 steps and a new three-step heterogeneous mechanism for unburned carbon (UBC) particles. Model predictions were evaluated with the extents of Hg oxidation monitored in the exhausts from a pilot-scale coal flame fired with five different coals. Exhaust conditions in the tests were very similar to those in full-scale systems. The predictions were quantitatively consistent with the reported coal-quality impacts over the full range of residence times. The role of Cl atoms in the homogeneous mechanism is hereby supplanted with carbon sites that have been chlorinated by HCl. The large storage capacity of carbon for Cl provided a source of Cl for Hg oxidation over a broad temperature range, so initiation was not problematic. Super-equilibrium levels of Cl atoms were not required, so Hg was predicted to oxidize in systems with realistic quench rates. Whereas many fundamental aspects of the heterogeneous chemistry remain uncertain, the information needed to characterize Hg oxidation in coal-derived exhausts is now evident: complete gas compositions (CO, hydrocarbons, H2O, O2 NOx, SOx), UBC properties (size, total surface area), and the ash partitioning throughout the exhaust system are required.     

A reevaluation of carbon monoxide: past trends,future concentrations,and implications for conformity "hot-spot" policies

Control of CO is one of the great air-quality management success stories of the past 20 years. This paper evaluates whether past progress will continue into the future and whether changes in microscale CO concentrations are comparable to reductions observed at the regional scale. Neighborhood and microscale CO concentrations were evaluated at six northern and southern California monitoring sites. The study also included a review of CO emission, concentration, and exposure trends and on-road motor vehicle-based CO emission control programs for California and the United States. Consistent with California and national trends, CO concentrations declined at each of the six study locations from 1988 through 1998. Microscale concentrations declined at the same rate as did neighborhood-scale concentrations. Rollback analyses demonstrated that microscale concentrations will continue to decline through at least 2010-2020. Within a few years, microscale violations of the CO National Ambient Air Quality Standards (NAAQS) will be unlikely in California except under extraordinary circumstances.     

Comparative studies of the Fe3+/2+-UV, H2O2-UV, TiO2-UV/vis systems for the decolorization of a textile dye X-3B in water

The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ  320 nm), but was decolorized when one of Fe³⁺, H₂O₂ and TiO₂ components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe²⁺–H₂O₂–UV  Fe²⁺–H₂O₂ > Fe³⁺–H₂O₂–UV > Fe³⁺–H₂O₂ > Fe³⁺–TiO₂–UV > TiO₂–UV > Fe³⁺–UV > TiO₂–visible light (λ  450 nm) > H₂O₂–UV > Fe²⁺–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity.     

Chronic toxicity of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in soil determined using the earthworm (Eisenia andrei) reproduction test

The sublethal and chronic effects of the environmental contaminant and explosive octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in artificial soil were assessed using the earthworm (Eisenia andrei). Based on various reproduction parameters (total and hatched number of cocoons, number of juveniles and their biomass), fecundity was reduced at the different concentrations of HMX tested (from 280.0 +/- 12.3 to 2502.9 +/- 230.0 mg kg-1 dry soil) in spiked artificial soil (LOEC: 280.0 +/- 12.3 mg kg-1 dry soil). The growth of adult E. andrei was also reduced at the different concentrations tested, though no mortality occurred, even at the highest tested concentrations. The number of juveniles produced was correlated with the number of total and hatched cocoons, and the biomass of juveniles was correlated with the number of cocoons. Pooled results of these and earlier studies on explosives (TNT, RDX) using the E. andrei reproduction test confirm that effects of HMX on cocoon production are indicative of some reproductive consequences (number of juvenile and their biomass), whereas adult growth, in general, does not correlate strongly with change in reproduction capacity.     

Levels of PCDDs and PCDFs in two kinds of fast foods in Korea

We initiated an attempt to gather preliminary Korean fast food data on the concentrations, whole weight and international toxic equivalent (TEQ), in two kinds of fast foods, hamburger and fried chicken. The levels of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in hamburgers are detected to be lower than in fried chickens. Total TEQ level of PCDDs in fried chicken is 47.45 times higher than in hamburger. In case of PCDFs, it is 48.61 times. Even though these are compared to the only one brand and three samples each, we think that these high levels of PCDDs/PCDFs in fried chicken are very important data because of the potentially increasing daily intake. If we continue to survey for PCDDs/PCDFs in fast foods more even, especially fried chicken, these data will be useful to calculate the estimated daily intake of TEQ levels of PCDDs/PCDFs in Korea.     

Solubilization of substituted indole compounds by beta-cyclodextrin in water

The solubilization of four pairs of substituted indole compounds (SICs) by β-cyclodextrin (β-CD) in water was investigated. The results show that 1,2,3,4-tetrahydrocarbazole and N-methyl-1,2,3,4-tetrahydrocarbazole form 1:1 inclusion complexes with β-CD, while the other six SICs form 1:2 inclusion complexes, respectively. To each pair of SICs with similar structures, the differences between their solubilization in β-CD/water solutions has been explained by the difference of their contact area within the β-CD cavity, the difference of their molecule polarity, or the presence of hydrogen bond between SIC molecule and β-CD molecule.     

Climatology of diurnal trends and vertical distribution of ozone in the atmospheric boundary layer in urban North Carolina

Vertical measurements of ozone were made on a 610-m-tall tower located about 15 km southeast of Raleigh, NC, as part of an effort by the state of North Carolina to develop a state implementation plan (SIP) for ozone control in the Raleigh Metropolitan Statistical Area. During summer 1993, 1994, and 1995, ozone was monitored at ground level, 250 m, and 433 m. Boundary layer wind, temperature, and other meteorological variable profiles were determined from balloon soundings. During summer 1996 and 1997, ozone was monitored at ground level, 76 m, 128 m, and 433 m. This paper presents the analysis and discussion of the five-year data. The evolutions of the convective boundary layer during daytime and the stable nocturnal boundary layer (NBL) were found to have marked impacts on ozone concentrations. A strong diurnal pattern, with an afternoon maximum and an early morning minimum, was dominant at ground level, but it was much weaker at elevated levels and insignificant above the NBL at night. Ozone deposition velocities at night during the measurement periods were estimated to range from 0.09 to 0.64 cm/sec. We found evidence of regional transport of ozone and/or its precursors from northwest and north of the site, which may play a role in high ozone events in the Raleigh-Durham area. Ozone concentrations between the various elevated levels were well correlated, while correlations between the ground and upper levels were much weaker. However, a strong correlation was found between the nighttime and early morning ozone concentrations (CR) in the residual layer above the NBL and the maximum ground level concentration (Co max) the following afternoon. Based on this correlation, the latter may be predicted by an observational model Co max = 27.76e 0.016 CR.