基于系统动力学模型的影剧院人员疏散策略

随着社会的发展,人们对生命的重视程度日益增强,大型公共场所临灾情况下人员疏散问题的研究也越来越有实际意义.分析以往影剧院火灾事故可以发现,不正确的疏散逃生行为所引起的通道堵塞,是导致人员大量伤亡的一个主要原因.根据系统动力学原理,应用STELLA系统软件,建立了基于粗网络模型的人员疏散模型.以影剧院发生火灾为例,分析了采取不同疏散策略所产生的避难效果差异,找出了最佳的疏散策略.所提研究方法和建立的模型,对于合理设计疏散路线和优化建筑物的出口与通道结构具有一定的实用价值.     

葛藤的饲用价值及其在攀西地区畜牧业中的应用

葛藤的根、茎、枝、叶不但富含蛋白质、碳水化合物等易消化吸收的营养物质,而且还具有防治动物疾病的作用,是饲药合用、牲畜和家禽喜食的优质牧草和饲料.研究了葛藤的饲用价值和饲用方法,提出了在攀西地区畜牧业中的应用建议.     

声波助清灰技术在滤简除尘器中的应用研究

在试验的基础上,分析了声波助清灰技术对除尘效率的影响,并对各种清灰方式单独或组合使用的效果进行比较,最后对下一步的研究提出了一些建议.     

厌氧-好氧一体化反应器处理高浓度有机废水的运行特性研究

本实验采用新型厌氧—好氧一体化反应器处理高浓度有机废水,主要研究了系统的启动与运行性能,并对系统的NH3 N去除效果作了初步考察。实验结果表明:在16℃～24℃的自然温度下,采用递增负荷、厌氧和好氧分期启动的方式,系统可在38天内达到较好的启动效果;在系统负荷运行期内,当系统总进水COD浓度平均值为3601 8mg/L,总出水COD浓度平均值为384 0mg/L,系统容积负荷平均值为2 54kgCOD/(m3·d),系统总HRT平均值为35 1h时,系统总COD去除率平均值达90 6%。实验还发现:当进水NH3 N浓度为280 3～350 7mg/L,整个系统的NH3 N去除率在68 5%～91 7%,平均为81 0%。由此说明,本反应器具有很好的COD去除性能和NH3 N去除效果,适合于处理COD浓度高且含有中等NH3 N浓度的有机废水。     

溶出伏安法中电极的操作技术

电极性能的优劣是完成溶出伏安分析的关键,本文就三电极体系中电极的选择、处理、安装、使用、维护方法等方面作了较详细的说明和探讨,提高了方法的精密度和准确度,使溶出伏安法在海水分析中得到更好的应用.     

Erratum to: Accumulation of Cr,Cd, Pb,Cu, and Zn by plants in tanning sludge storage sites: opportunities for contamination bioindication and phytoremediation

Environmental Science and Pollution Research -     

官方媒体参与下不同风险感知群体竞争模型及其演化规律

为识别公众风险感知的演化规律和官方媒体参与的作用机制，首先，根据公众的行为表现划分不同风险感知群体，并分析群体间的相互竞争和官方媒体的扰动作用；然后，通过扩展Lotka Volterra模型建立群体间的相互竞争模型；在此基础上，通过推导模型平衡点及其稳定性分析模型演化规律；最后，运用数值仿真考查了官方媒体的参与对模型演化的影响。研究结果表明:模型演化具有3种结果情景，官方媒体参与能够显著改变模型演化的速度和结果。     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.