乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。     

Rapid prediction of disinfection by-product formation potential by fluorescence

Recent drinking water regulations have lowered the disinfection by-product standards as well as added new disinfection by-products for regulation. Natural organic matter (NOM) plays a major role in the formation of undesirable organic by-products following disinfection/oxidation of drinking water. It is suspected that most precursors to disinfection by-products are humic, although nonhumic substances are also suspected of contributing to these by-products. Many of the disinfection by-products have adverse health effects in humans (i.e., carcinogenic or mutagenic effects). The primary chlorinated disinfection by-products of concern include trihalomethanes, haloacetic acids, and haloacetonitrile. Fluorescence spectroscopy was used to study humic and fulvic acids. The two fractions of humic substances, humic and fulvic acids, were characterized by a double-peak phenomena in an overlapping fluorescing region. Disinfection by-product formation potentials of humic and fulvic acids have been correlated with total organic carbon, UV absorbance at 254 nm, specific absorbance and fluorescence. River humic and fulvic acid was found to have the highest reactivity to disinfection by-product formation as compared to soil and peat humic and fulvic acid. Fluorescence spectroscopy has shown to be a rapid and predictive tool for disinfection by-products formation potential of humic and fulvic acids.     

凡口铅锌矿床地球化学特征及成矿作用分析

凡口铅锌矿床是发育于碳酸盐岩建造中的海底热泉喷溢沉积矿床,以“一大二富三集中”的特点和典型的地质地球化学特征吸引着中外矿床地质工作者。常量元素和矿化元素的分布、矿物包裹体特征、稀土元素组成和硫同位素组成反映出该矿床与外生作用有关。铅同位素组成具有壳源和下地壳来源铅的特征,矿物包裹体水氢、氧同位素组成表明,成矿溶液可能与深层建造水有关,后期与大气降水有关。矿区主要矿层经历海底热泉喷溢沉积-成岩的演化。     

Land use as a mitigation strategy for the water-quality impacts of global warming: a scenario analysis on two watersheds in the Ohio River Basin

This study uses an integrative approach to study the water-quality impacts of future global climate and land-use changes. In this study, changing land-use types was used as a mitigation strategy to reduce the adverse impacts of global climate change on water resources. The climate scenarios were based on projections made by the Intergovernmental Panel on Climate Change (IPCC) and the United Kingdom Hadley Centre's climate model (HadCM2). The Thornthwaite water-balance model was coupled with a land-use model (L-THIA) to investigate the hydrologic effects of future climate and land-use changes in the Ohio River Basin. The land-use model is based on the Soil Conservation Service's curve-number method. It uses the curve number, an index of land use and soil type, to calculate runoff volume and depth. The ArcView programming language, Avenue, was used to integrate the two models into a geographic information system (GIS). An output of the water-balance model, daily precipitation values adjusted for potential evapotranspiration, served as one of the inputs into the land-use model. Two watersheds were used in the present study: one containing the city of Cincinnati on the main stem of the Ohio River, and one containing the city of Columbus on a tributary of the Ohio River. These cities represent two major metropolitan areas in the Ohio River Basin with different land uses experiencing different rates of population growth. The projected hypothetical land-use changes were based on linear extrapolations of current population data. Results of the analyses indicate that conversion from agricultural land use to low-density residential land use may decrease the amount of surface runoff. The land-use practices which generate the least amount of runoff are forest, low-density residential, and agriculture; whereas high-density residential and commercial land-use types produce the highest runoff. The hydrologic soil type present was also an important factor in determining the amount of runoff and non-point-source pollution. A runoff-depth matrix and total nitrogen matrix were created for Cincinnati and Columbus to describe possible land-use mitigation measures in response to global climate change. The differences in Cincinnati and Columbus were due to differences in geographic location, air temperature, and total runoff. The results of this study may be useful to planners and policy makers for defining the possible impacts of future global climate and land-use changes on water resources.     

高校要加强大学生礼仪教育

本文列举了大学生在学校多种场合和情景中礼仪素养缺失的种种表现,并多方面分析问题产生的原因,最后简要提出了高校要加强大学生礼仪教育的对策。     

上海市污水回用用于防治地面沉降

以上海市为例,介绍了地面沉降的危害以及现有的防治对策,同时提出了污水经处理后回用于防治地面沉降的新思想,主要包括两种方法:①将处理后的污水回灌地下补给地下水;②用处理后的污水回用代替部分自来水,减少地下水的开采量,以控制地面沉降。     

滇池水污染总量控制中污染源系统特征研究

湖泊流域同入湖水系的流域单元组成，本文以滇池流域单元为基础，进行了污染源总量控制片区划分，并对各片区进行了污染源系统特征研究，从而为滇池主要污染物总量控制提出了工作重点和具体对象。     

飞机喷洒农药的损失分析

通过田间试验，对装配ＧＰ－８１扁扇型喷头的运５飞机在水稻和棉花上喷洒农药中的药液损失进行了分析，同时讨论了２，４－Ｄ丁酯对敏感作物的影响。结果表明，一元三次方程Ｙ＝ｂ０＋ｂ１ｘ２＋ｂ２ｘ＾２＋ｂ３ｘ＾３能很好地描述药液飘移与下风距离的关系，方程中的参数具有明确的实验意义；２，４－Ｄ丁酰对７００ｍ下风距离内的向日葵类高敏感植物有明显药害，对３５０ｍ范围内的大豆等中等敏感植物也有药害；药液由于飘移和蒸     

A/O和A2/O法除磷脱氮工艺影响因素及除磷动力学的研究

重点介绍A/O除磷工艺和A~2/O除磷脱氮工艺,以及影响除磷脱氮工艺因素和除磷动力学的研究。工艺研究采用了动态与静态实验方法,采用色质联机研究了有毒有机物的降解情况。试验结果表明,A/O、A~2/O工艺的BOD_5去除率近于二级污水处理厂,A~2/O法TP去除率近于三级污水处理厂,且去除难降解有毒有机物的效率高于传统的活性污泥法。动力学公式的修正使之更适于低碳源的情况。八种影响因素的研究为工艺的设计与运行提供了依据。     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.