Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

袋式除尘器在立窑烟气除尘中的应用

对立窑烟尘排放特点与立窑除尘工艺中的问题及对策进行了讨论。分析了立窑烟尘排放特征,对几种常见的立窑除尘的设备和工艺进行了比较,指出袋式除尘器可成功地用于立窑烟气除尘。并且从滤料选择、清灰方式、烟温控制、灰斗的气密性等方面详细地完善了袋式除尘器在立窑烟气除尘中的应用。     

一种超声速气体冲击射流噪声的屏蔽抑制方法

根据对冲击射流离散频率噪声产生的反馈机理的认识，提出了一种能够有效地破坏反馈环的形成，从而抑制冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈声波使其不能到达喷嘴唇口、同时屏蔽物不与射流接触来实现降噪的目的，实验结果表明，对于合适的屏蔽罩参数，正常降噪效果达5dB以上。分析表明这种降噪方法对射流冲击平板的推力和除尘除水效率的提高有帮助。     

生物硝化池污水中硝化细菌的快速定量研究

实验采用聚合酶链式反应（PCR）技术与最大几率数法（MPN）相结合的MPN－PCR法对生物硝化池污水中的硝化细菌进行快速定量。所用的一对PCR引物是在对硝化细菌的16SrRNA基因进行系统比较的基础上设计合成的，可以扩增出大小为388bp的DNA片段。以从生物硝化池污水中抽提的含硝化细菌DNA的混合DNA为模板，进行PCR扩增并确定合适的扩增条件。运用MPN－PCR法进行定量检测的整个过程可在几小时之内完成。     

中国产品生命周期影响评价方法研究

讨论了确定中国产品生命周期影响评价所需的标准化基准和权重的确定方法和程序，包括产品系统环境影响潜值计算，数据标准化，加权评估 以及计算环境影响负荷和资源耗竭系数4个步骤。标准化基准采用1990年中国人均环境影响总潜值来表达，而权重采用1990年的基准与2000年中国政府的削减目标所估算的基准之间的比值计算。     

电解制备聚合铝过程中Alb形态生成条件研究

考察了电解法制备聚合铝过程中AIb的最佳形成条件。AIb的形成与电流密度、极板间距、电解液的温度、铝的浓度以及电解时间等因素有关。在制备AI浓度为2．0mol/L的聚合氯化铝时，最佳的电流密度和极板间距分别为1．1A／dm^2和10mm。由于电化学过程中产生的不均匀的界面pH差值较大而生成较多的AI（OH）4^-作为AIb结构的结晶核心，因此能形成更多的AIb聚合形态。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

扬子地块西南缘低温成矿域Au、Sb、Hg、As矿床区域分布上的共生分异及控制因素

扬子地块西南缘大面积低温成矿域的Au、Sb、Hg、As矿床,常出现共生分异的现象,在空间上形成Au、Sb、Hg、As矿床、矿带相伴出现而又相对独立的规律性分布。在详细研究Au、Sb、Hg、As矿床、矿带区域分布及其产出地质背景的基础上,从不同的角度,对制约Au、Sb、Hg、As矿床、矿带共生分异的因素进行了探讨。     

绿色制造在机电产品全生命周期中的实施探讨

就机电产品从制造到报废回收的全生命周期中对环境的影响进行分析，提出了实行绿色制造的必要性。对绿色制造的产生、涵义、实施绿色制造的意义及其实施办法进行了论述。重点分析了机电产品的设计、毛坯制造、机械加工、热处理、装配、包装、使用和维修、报废回收等全周期各环节中可能带来环境污染的因素，提出了减少污染、实施绿色制造的措施与建议。