危机管理体制构建与政府职能转变--后非典时期对于突发公共灾害处置的思考

本文以公共卫生危机和社会突发事件为个案,以政府面对这些危机所面临的挑战和取得的经验为研究对象,分析公共危机产生的原因和基本特征,提出了面对公共危机时应建立政府危机管理的预警系统,建立快速反应机制,动员社会参与危机救治,加强信息流通,加强公共危机的法制化建设.     

假单胞菌XD-1(Pseuomonas XD-1)的产表面活性剂性能研究

从含油废水中分离到1株表面活性剂产生菌,经鉴定为假单胞菌(Pseuomonassp.),命名为XD 1.对假单胞菌XD 1的产表面活性剂性能进行研究,实验结果表明,在正交优化的培养基中发酵培养时,菌XD 1可将培养液的表面张力从70 0mN·m-1降至30 2mN·m-1,其产表面活性剂方式为生长相关型;经提取分析,菌XD 1所产表面活性剂为脂肽类和糖脂类物质的混合物,脂肽类物质为主要成分;菌XD 1所产表面活性剂的CMC值为50mg·L-1,在pH=6 0时表面活性剂表现出最佳活性;菌XD 1所产表面活性剂主要积累在胞内特定的细胞器中,并在细胞壁上产生一层粘附的表面活性剂膜,膜厚140nm,在生长过程中,菌体会将细胞器和细胞壁上的表面活性剂释放到胞外.将培养72h的菌体浸入双蒸水中,6h后菌体能把积累在细胞器和细胞壁上的表面活性剂释放到水体中.     

炼化装置大型机组润滑油站油雾回收系统改造

针对炼化装置机组润滑油站油雾无法回收、现场卫生差及VOCs排放超标等问题,通过对几种油雾治理方式的分析比对发现,将离心式分离法和过滤法相结合可显著降低补油量,改善现场卫生,直接减少非甲烷总烃排放量,同时也为装置创造了一定的经济效益。     

Effect of organic acids on adsorption and desorption of rare earth elements

Effect of citric, malic, tartaric and acetic acids on adsorption of La, Ce, Pr and Nd by and desorption from four typical Chinese soils was studied. Generally, adsorption capacities of rare earth elements (REEs) were significantly correlated with the cation exchange capacity (CEC) of soils. In the presence of acetic acids adsorption of REEs was similar to that in the presence of Ca(NO3)2. However, in the presence of citric, malic and tartaric acids adsorption of REEs by Heilongjiang, Zhejiang and Guangdong soils decreased to varying extents if compared with that in the presence of nitrate and acetic acid. The significance of suppression followed the order of citric acid > malic acid > tartaric acid > acetic acid, which was consistent with the order of stability of complexes of REEs with these organic acids. However, the adsorption increased with increasing equilibrium solution pH. For Jiangxi soil with low soil pH, CEC and organic matter these organic acids exerted an even more serious suppression effect on the adsorption of REEs. Another feature of the relationship between the adsorption of REEs and equilibrium solution pH was that the adsorption of REEs decreased with increase of pH from 2 to 4.5 and then slightly increased with further increase of pH. Desorption of REEs varied with soils and with organic acids as well. REEs were released easily from Heilongjiang, Zhejiang and Guangdong soils in the presence of organic acid. Generally, desorption of REEs decreased with increasing equilibrium solution pH. Effect of organic acids on desorption of REEs from Jiangxi soil was more complicated. In the presence of citric and malic acids no decrement and/or slight increase in desorption of REEs were observed over the equilibrium solution pH from 3 to 6.5. The reasons for this were ascribed to the strong complexing capacity of citric and malic acids and low soil pH, CEC and organic matter of Jiangxi soil.     

Comparison of a rhizosphere-based method with other one-step extraction methods for assessing the bioavailability of soil metals to wheat

There is no method recognized as a universal approach for evaluation of bioavailability of heavy metals in soil. Based on the simulation of the rhizosphere soil conditions and integration of the combined effects of root-soil interactions as a whole, a rhizosphere-based method has been proposed. Wet fresh rhizosphere soil was extracted by low-molecular-weight organic acids (LMWOAs) to fractionate metal fractions of soil pools, which were then correlated with the metal contents of wheat roots and shoots. The rhizosphere-based method was compared with other one-step extraction methods using DTPA, EDTA, CaCl2, and NaNO3 as extractants and the first step of the Community Bureau of Reference (BCR) method. Simple correlation and stepwise multiple regression analysis were used for the comparison. Simple correlation indicated that the extractable Cu, Zn, Cr, and Cd of soils by the rhizosphere-based method were significantly correlated with the metal contents of wheat roots. For DTPA, BCR1 and EDTA methods there was a relatively poor correlation between the extractable Cu, Zn and Cd of soil and metal contents of wheat roots. Stepwise multiple regression analysis revealed that the equation of the rhizosphere-based method was the simplest one, and no soil properties variables needed to be added. In contrast, the equations of other one-step extraction methods were more complicated, and soil properties variables needed to be entered. The most distinct feature of the rhizosphere-based method was that the recommended method was suitable for acidic, neutral and near alkaline soils. However, the DTPA and EDTA extraction methods were suitable for calcareous soils only-or-only for acidic soils. The CaCl2, and NaNO3 extraction methods were only suitable for exchangeable metals. In short, the rhizosphere-based method was the most robust approach for evaluation of bioavailability of heavy metals in soils to wheat.     

A model for evaluation of the phytoavailability of trace elements to vegetables under the field conditions

Currently, several single extraction methods are used for the evaluation of the phytoavailability of metals using pot experiments. A systematic comparison, however, is lacking. It is especially true for the field studies. This study was to investigate the phytoavailability of trace elements to vegetables grown on metal-contaminated soils under the field conditions. All soils collected were typical calcareous soils in northern China. Four frequently used methods using CaCl2, diethylenetriaminepentaacetic acid (DTPA), CH3COOH, and water as extractants were compared for phyto-availability. The concentrations of metals extracted by these four extraction methods ranged from 3.42 to 815, 1.51- 6965, 0.732-24473, 0.688-7863, 0.246-685, 1.99-5337 0.203-4649 ng/g for Cr, Ni, Zn, Cu, Cd, Pb and REEs, respectively. Simple correlation analysis indicated that a significant correlation (Cr: r = 0.5411**; Zn: r = 0.6352**; Cd: r = 0.6979**; Pb: r = 0.5537** and REEs: r = 0.5185** -0.6684**) was observed between the CaCl2-extractable metals in soil solution and that in Chinese cabbage. In addition, soil pH, organic matter (OM), and cation exchange capacity (CEC) also affect the phytoavailability. An empirical model was developed to express the combined effect of soil properties on the phytoavailability. The stepwise multiple regression analysis demonstrated that the phytoavailability of trace elements strongly correlated with the extractable fraction by CaCl2, total metal concentration in soils, and soil pH, OM, CEC. This model can describe approximately 75-95% of the variability of metal uptake and the r2 values ranged from 0.741** to 0.954**, which were much better than the single correlation analysis. For celery and cole, a strong correlation was obtained for Cr, Ni, Zn, Cu, Cd, La, Ce, Pr and Nd. For spinach and Chinese cabbage, however, a positive correlation was only observed for 1 and 3 metals, respectively. Generally, the developed empirical model can integrate the combined effects of soil properties, extractable metal fractions in soil solutions and plant species on the phytoavailability of metals to vegetables in the field conditions.     

Photocatalytic oxidation of pesticide rinsate

Pesticide rinsate has been considered as one of the major threats for the environment. In this study, photocatalysts such as TiO2 and O3 were used to promote the efficiency of direct UV photolysis to prevent such wastewater pollution. Carbofuran (a carbamate pesticide) and mevinphos (an organophosphate pesticide) with a concentration of 100 mg/L were selected as the test pesticide rinsates. Parent pesticide compound, COD, and microtoxicity analysis were employed to investigate the effect of photocatalyst on the degradation efficiency of pesticide in rinsate. It was found that the photocatalytic oxidation process (UV/O3, UV/TiO2) showed much higher COD removal and microtoxicity reduction efficiency for pesticide rinsate than did direct UV photolysis under the imposed conditions, suggesting that photocatalytic oxidation processes such as UV/O3 and UV/TiO2 could be a better alternative to treat pesticide rinsate. In addition, it was noted that increasing the initial pH of mevinphos rinsate to a basic level was required to reach higher COD removal efficiency and positive microtoxicity reduction efficiency while it was not necessary for the treatment of carbofuran rinsate.     

Photocatalytic reactions of pyrene at TiO2/water interfaces

The photocatalytic oxidation of pyrene preadsorbed on TiO2 is examined in aqueous suspension under UV irradiation. Chemical oxygen demand measurements, UV-VIS spectrophotometer, infrared spectrometer and GC-MS analytical techniques were used to monitor the formed intermediates. During the oxidation processes, the ring-open reaction, hydroxylation and ketolysis occurred to produce some intermediate products (4-oxapyrene-5-one, 1,6- or 1,8-pyrenediones, 4,5-phenanthrenedialdehyde, cyclopenta[def]phenanthrene). Some factors affecting the photodegradation rate were also studied. The results were different from other studies: The pH of the dispersion, ratio of Py/TiO2:water had little effect on the photooxidation rate of pyrene catalyzed by TiO2, while the surface coverage, addition of Fe3+ affected it greatly.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

水中钙离子现场快速测定方法研究

通过研制一种测试管 ,从而能简便、快速的测定水中的钙离子。该测试管尤其适宜于现场即时监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点