颗粒流冲击力研究现状及讨论∗

颗粒流包括滑坡、泥石流、碎屑流、雪崩等,通常对桥梁、公路、居民区具有较大危害。分析了颗粒流的运动过程及其侵蚀、堆积和爬高等特性;此外,对颗粒流冲击力计算模型及其野外观测结果进行阐述。结果表明:现有冲击力计算模型认为冲击力在结构全断面呈均匀分布,忽略了颗粒流的运动特性对冲击力的影响;大块石冲击力计算忽略了颗粒破碎和浆体垫层效应对冲击力的影响,造成巨大的计算误差;由于传统传感器的缺陷,现有野外观测结果也存在较大误差。对此本文提出野外观测需要通过引入或开发新式压力传感器以得到更准确的颗粒流冲击力大小及其分布形式,从而更精确的修正理论模型;理论计算模型研究工作需要考虑颗粒流浆体的垫层效应、流体与基底的相互作用及块石冲击破碎等对流体冲击力的影响,从而推导出更准确的冲击力计算模型,指导工程实际。     

粗枝云杉不同径级根系分解过程中4种养分元素的释放特征

植物根系分解是养分元素进入土壤的重要途径之一.为了解径级对根系分解过程中养分元素释放的潜在影响,以川西亚高山针叶林中的粗枝云杉(Picea asperata)为对象,采用原位分解试验,研究云杉3个径级(0-2 mm,2-5 mm和5-10 mm)根系分解过程中钾(K)、钠(Na)、钙(Ca)和镁(Mg)元素的浓度、残留...     

Determination of Steroid Estrogens in Wastewater Treatment Plant of A Controceptives Producing Factory

Steroid estrogens such as estrone (E1), 17β-estradiol (E2), estriol (E3), and 17α-ethynylestradiol (EE2) have been suspected to be the main contaminants, which can affect the endocrine system of animals. Many authors have investigated these chemicals in the domestic wastewater treatment plants (WTP). However, wastewater from industries producing steroid contraceptives has not got ample attention. From the environmental point of view, the four steroids are very significant because even very low concentrations (ng/L) can cause reproductive disturbances in human, livestock and wildlife. The main purpose of the present investigation was to develop an analytical method for the determination of the four steroid estrogens present in WTP of a pharmacy factory, mainly producing contraceptive medicine in Beijing, China. Analysis was performed by solid-phase extraction (SPE) system and liquid chromatography combined with tandem mass spectrometry (LC/MS/MS). The average recoveries from effluent samples ranged from 88% to 103% and the precision of the method ranged from 9% to 4%. Based on 0.5-L wastewater samples, the limit of quantification (LOQ) was determined at 0.7 ng/L for E1, 0.8 for E2, 0.9 ng/L for E3, and 0.5 ng/L for EE2 in influent, and 1.0 ng/L for E2 and EE2, and 2.0 ng/L for E1 and E3 in effluent. In the influent samples, average concentrations of 80, 85, 73 and 155 ng/L were determined for E1, E2, E3 and EE2, respectively, showing that they were removed in this WTP to the extent of 79, 73, 85 and 67%, respectively.     

基于有序Logit与Probit模型的交通事故严重性影响因素分析

为准确分析影响交通事故严重性的各项因素,引入有序选择模型中的Ordinal Logit模型和Ordinal Probit模型,研究驾驶员、车辆、环境、管理因素与事故严重程度之间的耦合关系,利用计量经济学理论和统计学方法对模型进行显著性检验。并选择美国北卡罗来纳州2010年至2014年385个翻车事故样本进行严重性影响因素分析,所得回归模型参数估计均符合Wald检验(p≤0.0001)和似然比检验(p≤0.0001),模型的拟合度也都符合Pearson检验(p=0.7976)、偏差检验(p=0.6006)和信息准则检验,模型预测精度指标值均大于0.7。所得两个模型中变量"安全带"(p≤0.001)、"路面状况"(p=0.0071)、"道路线形"(p=0.0077)、"路面类型"(p=0.0251)都对翻车事故的严重性具有显著影响,表明有序Logit模型和有序Probit模型均适用于分析和揭示影响交通事故严重性的各个因素。     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – II. Mass size distributions and gas-particle partitioning

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study gas-particle partitioning, aerosol mass size distributions and to explore the potential of a higher time resolution (4 h-sampling).In the particulate phase the mass median diameters of the PAHs were found almost exclusively in the accumulation mode (0.1–1.0 μm of size). These were larger for semivolatile PAHs than for non-volatile PAHs. Gas-particle partitioning of semivolatile PAHs was strongly influenced by temperature. The results suggest that the Junge–Pankow model is inadequate to explain the inter-species variation and another process must be significant for phase partitioning which is less temperature sensitive than adsorption. Care should be taken when interpreting slopes m of plots of the type log K_p = m log p_L⁰ + b based on 24 h means, as these are found sensitive to the time averaging, i.e. tend to be higher than when based on 12 h-mean samples.     

不同碳源和泥龄对反硝化聚磷的影响

在4个SBR装置(1#~4#)中,对4种不同比例的丙酸/乙酸合成废水采用厌氧/缺氧方式驯化富集反硝化聚磷菌(DPB),研究了碳源浓度和污泥龄对除磷的影响。实验结果表明:(1)厌氧段碳源COD浓度越高,释磷越充分,溶解性正磷酸盐(SOP)去除率越高;但当碳源COD浓度超过某个浓度值时,未反应完全的有机物残留于后续缺氧段对缺氧吸磷产生抑制作用。(2)污泥龄SRT=15 d时,活性污泥的性能较好,达到了较好的除磷效果。(3)在相同碳源浓度和相同的污泥龄下,随着丙酸/乙酸比例的提高,SOP的去除率逐渐的降低。说明在厌氧/缺氧环境下,碳源中丙酸比例的提高不利于系统中磷的去除。高乙酸含量的碳源更适合反硝化除磷系统。     

超声协同TiO_2光催化降解4,4′-二溴联苯

以纳米TiO2膜为光催化剂,对4,4′-二溴联苯水溶液进行了超声光催化(US+UV)、光催化(UV)和超声(US)降解,探讨了初始浓度、超声的声强和频率等对降解4,4′-二溴联苯的影响。结果表明,4,4′-二溴联苯的超声光催化降解存在协同效应,降解率随4,4′-二溴联苯初始浓度的增大而下降,随声强和频率的增大而增大。超声光催化过程符合一级动力学方程,反应数率常数为0.011 min-1。超声光催化与光催化的降解产物不同。     

旋流板式气液分离器减阻杆实验研究

实验研究了不同条件下减阻杆对分离器分离效率及压降的影响。研究结果表明,在旋流板式气液分离器内安装减阻杆可以在不减小分离效率的前提下降低阻力,减阻幅度的大小与减阻杆的轴向长度、径向位置和分离器内的空速有关;减阻杆对于分离效率的影响在实验范围内很小。研究结果可为分离器的优化设计提供建设性指导。     

TiO_2/SiO_2@γ-Fe_2O_3光催化剂的制备及其光催化性能

以共沉淀法制备的纳米Fe3O4为核,以正硅酸乙酯为硅源,通过溶胶-凝胶法制备了SiO2@Fe3O4壳-核结构纳米颗粒,再以钛酸四丁酯为钛源,通过溶胶-凝胶法、经焙烧制得TiO2/SiO2@γ-Fe2O3磁性纳米光催化剂。采用X射线衍射仪、透射电子显微镜、比表面分析仪、振动磁强计对光催化剂的结构进行了表征,以苯酚溶液为模拟废水对光催化剂的光催化性能进行了评价。实验结果表明:经500℃焙烧的光催化剂活性相为锐钛矿型TiO2;在苯酚溶液初始浓度为0.2mmol/L、苯酚溶液pH为7的条件下,COD去除率为70.9%。     

MBR技术的发展及应用

介绍了目前MBR的主要类型、膜污染情况、膜清洗方式以及MBR在不同领域的应用情况和工程实例,对MBR技术未来的发展趋势进行了预测。