Multivariate characterization of elements accumulated in Wolfiporia extensa mushroom from Yunnan province of China

ABSTRACT

Dried sclerotia of Wolfiporia extensa have been used as medicine in Asia from Eastern Han Dynasty, and also used as traditional snack called “fulingjiabing” in Beijing, China. In this paper, 18 macro and trace elements (Ag, As, Ba, Cd, Co, Cr, Cs, Cu, Fe, Li, Mn, Ni, Pb, Rb, Se, Sr, V, and Zn) in both flesh and peel of Wolfiporia extensa from seven sites of Yunnan province in China were determined by inductively coupled plasma mass spectrometer. The average recovery rates of certified reference materials for GBW10015 (spinach leaves) ranged from 90.5 to 113%, for GBW10028 (citrus leaves) from 92.8 to 106%, and for GBW07603 (bush branch and leaves) from 83.3 to 114.6%. Generally speaking, the concentration of all elements determined was at common level. The results of this survey indicate that mineral compositions in peel were higher than in flesh. In peel, the contents of investigated trace metals in mushroom samples were found to be in the range of 1,660–13,400 µg·g^?1 dry matter (dm) for Fe and 29.6–710 µg·g^?1 dm for Mn. The mean contents of Cr, Cu, Rb, V, and Zn in peel were between 10 and 20 µg·g^?1 dm, followed by As, Co, Li, Ni, Pb, Se, and Sr with mean contents between 1 and 10 µg·g^?1 dm, while Ag, Cd, and Cs had mean contents of <1 µg·g^?1 dm. In flesh, the concentration of Fe was in the range of 54–900 µg·g^?1 dm, and it was 1.5–49 µg·g^?1 dm for Mn, followed by Ba, Cu, Rb, and Zn in the range of 1 to 10 µg·g^?1 dm, while for Ag, As, Cd, Co, Cr, Cs, Li, Ni, Pb, Se, Sr, and V it was <1 µg·g^?1 dm. The concentration of toxic elements, such as As, Cd, and Pb, in both flesh and peel was below the permissible limits of World Health Organization. However, As and Pb contents in peel were higher than the limits permitted in the Chinese Pharmacopoeia. The results of principal component analysis showed that the flesh of Wolfiporia extensa from all the seven sites of the Yunnan province tend to cluster together, most probably because the origin of mineral elements in both flesh and peel is wood substrate (old and dead pine trees).     

有色金属企业的安全管理

近年来，我国国内有色金属产量和对矿产品需求量快速增长。10种有色金属产量已从1980年的124．8万吨发展到2008年的产量为2，519万吨，增长了20倍多，并从2002年起，连续六年产量位居世界第一；预计到2020年10种有色金属需求总量为3000万吨。     

CO2 dynamic of Lake Donghu highlights the need for long-term monitoring

Environmental Science and Pollution Research - Inland freshwater lakes have been widely considered as significant sources of CO2 to the atmosphere. However, long-term measurements of CO2 dynamics...     

以农田高盐排水为替代镁源回收养殖废水中的磷素

为解决新疆南疆地区养殖废水高浓度氮磷和农田排水中的高浓度盐分的协同污染问题,以农田高盐排水为镁源对模拟养殖废水中的磷进行了回收实验,对比了高盐排水和常规镁源的磷回收效率,探讨了影响其回收的主要因素,并通过正交试验获得了高盐排水回收磷的最优反应条件.与常规MgC12镁源的磷回收对比分析结果表明,pH=10时高盐排水回收磷的效率最高,比MgCl2镁源达最大回收率所需的反应pH略高;利用L34正交试验探究了pH(8、9、10、11)、Mg:P摩尔比(1.0、1.5、2.0、2.5)、N:P摩尔比(1.0、1.5、2.0、4.0)对高盐排水镁源回收磷的影响,并结合SPSS统计分析得到高盐排水回收磷的最优反应条件为pH=10、n(Mg):n(P)=2.5,n(N):n(P)=4;高盐排水中的HCO3-和SO42-离子对磷回收有抑制作用,而Ca2+离子对磷回收有促进作用;XRD和SEM-EDS分析表明,高盐排水回收磷的产物以鸟粪石为主,并夹杂着磷灰石和粘土矿物等杂质.整体上,以高盐排水作为替代镁源回收磷的效果较好,本研究为解决鸟粪石沉淀法的镁源问题提供了一种新思路.     

容积负荷对ABR-MBR工艺反硝化除磷性能的影响

采用连续流ABR-MBR组合工艺处理生活污水,研究不同容积负荷(volume loading rate,VLR)对该工艺反硝化除磷性能的影响,获得最佳工艺参数.试验考察ABR进水容积负荷(以COD计,下同)分别为0.76、1.01、1.51和2.27 kg·(m~3·d)~(-1)时系统去碳脱氮除磷的性能,并在各ABR容积负荷条件下考察MBR容积负荷对MBR反应器硝化性能的影响.结果表明,在ABR进水容积负荷为1.51 kg·(m~3·d)~(-1)的条件下,系统A2隔室COD去除量最大,并在MBR容积负荷为0.462 kg·(m~3·d)~(-1)时,MBR反应器中实现了短程硝化,系统NH_4~+-N和TN去除率分别达到90%和72%以上,厌氧释磷量为7.41 mg·L~(-1),缺氧吸磷量达到15.42 mg·L~(-1),出水PO_4~(3-)-P浓度低于0.5 mg·L~(-1),这表明短程硝化更有利于强化ABR-MBR系统的反硝化除磷性能.     

On the effect of Fe(III) on proliferation of Microcystis aeruginosa at high nitrate and low chlorophyll condition

The impact of Fe concentrations on the growth of Microcystisaeruginosa in aquatic systems under high nitrate and low chlorophyll conditions was studied. The responses of cell density, total and cell chlorophyll-a intracellular Fe content and organic elemental composition of M. aeruginosa to different concentration gradients of Fe(III) in the solutions were analysed. The results showed that the proliferation speeds of M. aeruginosa were: (1) decelerated when the Fe(III) concentration was lower than 50 μg/L in the solutions, (2) promoted and positively related to the increase of Fe(III) concentration from 100 to 500 μg/L in the solutions over the experimental period, and (3) promoted in the early stage but decelerated in later stages by excess adsorption of Fe by cells when the Fe(III) concentration was higher than 500 μg/L in the solutions. The maximum cell density, total and cell chlorophyll-a were all observed at 500 μg Fe(III)/L concentration. The organic elemental composition of M. aeruginosa was also affected by the concentration of Fe(III) in the solutions, and the molecular formula of M. aeruginosa should be expressed as C_7–7.5H₁₄O_0.8–1.3N_3.5–5 according to the functions for different Fe(III) concentrations. Cell carbon and oxygen content appeared to increase slightly, while cell nitrogen content appeared to decrease as Fe(III) concentrations increased from 100 to 500 μg/L in the solutions. This was attributed to the competition of photosynthesis and nitrogen adsorption under varying cell Fe content.     

Effects of Cu2+ and humic acids on degradation and fate of TBBPA in pure culture of Pseudomonas sp. strain CDT

Soil contamination with tetrabromobisphenol A(TBBPA) has caused great concerns;however, the presence of heavy metals and soil organic matter on the biodegradation of TBBPA is still unclear. We isolated Pseudomonas sp. strain CDT, a TBBPA-degrading bacterium, from activated sludge and incubated it with ~(14)C-labeled TBBPA for 87 days in the absence and presence of Cu~(2+)and humic acids(HA). TBBPA was degraded to organic-solvent extractable(59.4% ± 2.2%) and non-extractable(25.1% ± 1.3%) metabolites,mineralized to CO_2(4.8% ± 0.8%), and assimilated into cells(10.6% ± 0.9%) at the end of incubation. When Cu~(2+)was present, the transformation of extractable metabolites into non-extractable metabolites and mineralization were inhibited, possibly due to the toxicity of Cu~(2+)to cells. HA significantly inhibited both dissipation and mineralization of TBBPA and altered the fate of TBBPA in the culture by formation of HA-bound residues that amounted to 22.1% ± 3.7% of the transformed TBBPA. The inhibition from HA was attributed to adsorption of TBBPA and formation of bound residues with HA via reaction of reactive metabolites with HA molecules, which decreased bioavailability of TBBPA and metabolites in the culture. When Cu~(2+)and HA were both present, Cu~(2+)significantly promoted the HA inhibition on TBBPA dissipation but not on metabolite degradation. The results provide insights into individual and interactive effects of Cu~(2+)and soil organic matter on the biotransformation of TBBPA and indicate that soil organic matter plays an essential role in determining the fate of organic pollutants in soil and mitigating heavy metal toxicity.     

北京市潮白河再生水补水河段水质时空变异

城市河道是城市再生水利用的主要载体,而人工湿地是城市再生水河道补水前主要的水质净化方式.为了解再生水补水与人工湿地对再生水补水段水质的影响,选取北京市潮白河再生水补水河段作为研究对象,利用聚类分析、判别分析及因子分析等方法对不同季节水体的水质情况进行分析.结果表明:研究区内水体氮磷污染严重,其中TN污染表现为NO₃--N、NO₂--N和NH₄+-N的混合型污染.聚类分析结果表明,水质在季节尺度上表现为丰水期（6-9月）和枯水期（2月、3月、5月和12月）两大类;在空间尺度上受再生水补水和湿地净化的影响表现为显著的空间差异性.判别分析结果表明,再生水补给对河道水质的影响无显著季节差异,湿地净化功能在丰水期和枯水期差异较大且丰水期湿地的净化效果最为明显.因子分析结果表明,再生水作为城市河道的补充水源,一方面对河道中的F-、Chl-a等起到稀释作用,另一方面使得水体中的N、P及离子含量增加;丰水期湿地的净化作用使水体中氮磷等有机营养物质含量及ρ（TDS）等显著降低.      

流体剪切与超声空化破解剩余污泥的参数优化

为提高剩余污泥的破解效果并降低能耗,采用FS（fluid shear,流体剪切）、UC（ultrasonic cavitation,超声空化）、FS和UC联合工艺（FS-UC,UC-FS）破解剩余污泥,并应用单因素试验结合响应面法对联合工艺进行优化.结果表明:FS对剩余污泥破解效果一般,只在开始阶段具有较好效果,随作用时间延长,破解效果未有显著提高甚至下降.UC对剩余污泥破解效果明显,随作用时间延长,破解效果显著提升,但能耗也随之增大,EDR（energy disintegration ratio,效能比）明显下降.相同作用时间下,UC破解效果优于FS破解效果,UC破解剩余污泥的DD_COD（degree of disintegration,破解率）与EDR均明显高于FS方法.单因素试验得出的较优FS作用时间范围为2~8 min,较优UC作用时间范围为5~15 min.响应面法试验结果显示,联合工艺的剩余污泥破解效果和能量利用率均优于单一方法,联合工艺中FS-UC工艺的破解效果优于UC-FS工艺.FS-UC工艺的最佳参数:FS处理5.6 min再UC处理15.0 min,该条件下剩余污泥实际DD_COD为50.8%,EDR为26.8%.UC-FS工艺的最佳参数:先UC作用15.0 min再FS作用7.8 min,该条件下剩余污泥实际DD_COD为36.5%,EDR为17.1%.研究显示,以DD_COD和EDR为指标,4种工艺的高效性顺序为FS-UC > UC-FS > UC > FS,其中FS-UC工艺具有能耗低、破解效率高的特点,是4种工艺中剩余污泥破解效果最好的一种工艺.