多层填料生物转鼓去除NO废气的效能比较研究

生物转鼓过滤器能有效去除一氧化氮(NO)废气,为进一步提高生物转鼓过滤器的去除效能,实验改变了生物转鼓的填料结构,并与单层填料的生物转鼓进行了比较研究.结果表明,多层填料生物转鼓比单层填料生物转鼓更能有效去除NO,运行也更加稳定.8个月的连续运行实验表明,多层填料生物转鼓对NO去除率稳定在53.9％ ～93.4％之间,平均去除效率79.8％,而单层填料生物转鼓的平均去除率仅有68.7％;在相同实验条件下,空床停留时间(EBRT)可从单层填料生物转鼓的86.4 s降至多层填料生物转鼓的57.6 s.多层填料生物转鼓的最优工艺条件为,营养液量为1.3～3L,转速为0.75 r·min-1,在以葡萄糖为碳源时,TOC＞ 1250 mg·L-1后,去除效率增长幅度趋于平缓.     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

短程硝化颗粒污泥的快速培养与硝化特性研究

以城市污水处理厂剩余污泥为种泥,以2 min沉淀时间为选择压,在序批式反应器(SBR)中快速培养出好氧颗粒污泥。经过60个周期(20 d),反应器内出现砂粒状颗粒,并持续稳定运行120 d。成熟的颗粒污泥平均粒径856.56μm,具有良好的硝化性能。SBR反应器以固定曝气时间方式运行,亚硝酸盐积累率达80%以上,实现了稳定短程硝化。试验结果表明:絮体污泥(即接种污泥)与颗粒污泥的硝化过程相似但略有差异。二者差别在于,氨氮氧化结束后,继续曝气120 min,絮体污泥将亚硝酸盐完全转化为硝酸盐,而颗粒污泥仅将部分亚硝酸盐转化且过程比较缓慢。     

景观用再生水氮磷条件下两种典型水华藻类的生长及竞争规律

针对再生水景观水体的藻类控制,以BG11培养基为基础,设定不同氮磷浓度,对铜绿微囊藻和小球藻进行了纯培养和共培养实验。实验结果表明:初始总氮浓度为15 mg/L、总磷浓度为0.1 mg/L时两种藻就能出现明显的生长高峰;当总氮浓度为3⁴5 mg/L,氮磷比为3045 mg/L,氮磷比为30¹50的情况下,小球藻在与铜绿微囊藻的竞争中容易成为优势藻种。     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

日本沼虾与秀丽白虾的营养生态位

为科学评估虾类的营养关系及资源的保护,利用稳定同位素技术研究了2种淡水虾类在大型通江湖泊——洞庭湖和鄱阳湖中的营养生态位和生态宽幅大小.结果表明,日本沼虾与秀丽白虾的δ13C值呈显著差异,而δ15N值无明显差异.同时,由于营养状况及水文的差异,虾类同位素值的差异在2个湖泊中表现不同.日本沼虾的δ13C值范围比秀丽白虾大,频率分布相对集中在-25.0‰～-23.0‰区间,表明其摄食的食物来源更广,对某些饵料生物有所偏好.另外,日本沼虾与秀丽白虾的营养生态位重叠程度较大,表明二者的主要食物来源相同,在食物网中占据的营养级相近,存在着激烈的种间竞争.在鄱阳湖中,日本沼虾占有的营养生态位和生态宽幅大于秀丽白虾;而在洞庭湖的研究结果则相反,主要是由于采样区域生境的差异及人类活动干扰的程度不同所致.     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

无锡市大气中类二噁英多氯联苯污染水平

为了了解无锡市大气中类二噁英多氯联苯(Dioxin-like PCBs,DL-PCBs)水平,利用大流量空气采样器在无锡市分别采集了6个气相和6个颗粒相大气样品,气相色谱-质谱(GC-NCI-MS)测定样品中12种类二噁英多氯联苯。结果显示,大气样品中∑_(12)DL-PCBs的总浓度(气相+颗粒相)为1157～2 747 fg/m³,平均浓度为1759 fg/m3,平均浓度为1759 fg/m³。其中,气相的浓度为11 124～2 721 fg/m3。其中,气相的浓度为11 124～2 721 fg/m³,平均值为1 701fg/m3,平均值为1 701fg/m³;颗粒相的浓度为26～143 fg/m3;颗粒相的浓度为26～143 fg/m³,平均值为58fg/m3,平均值为58fg/m³。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m3。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m³,平均值为3.53fg TEQ/m3,平均值为3.53fg TEQ/m³。DL-PCBs单体中PCB-118的浓度最高,平均占总浓度的54%,其次是PCB-105和PCB-77,PCB+81在所有样品中均未检出。在所有DL-PCBs中,毒性当量浓度的主要贡献者为PCB-126,其平均贡献率为95%,其次为PCB-169,平均贡献率为3%。