废旧电脑拆解工艺与资源化案例研究

以某再生资源公司的废旧电脑拆解为案例进行研究,介绍了工艺技术、拆解回收各种资源的数据。研究结果表明,我国废旧电脑人工拆解-破碎-冶炼相结合的工艺,是电子废弃物循环利用、资源高效回收、减少环境风险的较好工艺技术,符合固废处理的3R(替代、减少、优化)原则。     

周丛藻类水质处理系统中氮、磷污染物去除效果研究

为了评价周丛藻类系统对受污染景观河道水体氮、磷污染物处理效果,以及最佳污染物去除浓度,通过设置周丛藻类水质处理系统,并模拟藻类自然生长条件,于2006年夏秋之季,对该周丛藻类系统的水质处理效果进行了研究.结果表明,①相对于标准培养液条件下20%的平均去除率,周丛藻类水质处理系统中TN、NH4 -N去除率分别可达30%和50%以上,其中TP平均去除率则相对较低(＜10%);②系统最大氮污染物去除率(TN＞65%,NH4 -N＞80%)出现在进水TN浓度约11.0mg·L-1条件下,而TP去除率则随进水浓度增加呈下降趋势;③试验期间,系统中周丛藻类生物量增加54%,Chl-a浓度增加58.2%,同时藻类群落由试验初期的颗粒态硅藻、绿藻为主,演替为以丝状和颗粒状蓝、绿藻为主.     

用褐铁矿制备聚硅氯化硫酸铁的研究

通过正交实验研究了用盐酸、硫酸、褐铁矿和硅酸钠制备聚硅氯化硫酸铁（PSFCS）絮凝剂的工艺条件。实验结果表明,浸取时间为2.5-3 h,浸取温度为110℃,硫酸浓度为6 mol/L,盐酸浓度为3 mol/L,质量液固比为4∶1,铁的浸出率可达95.7%-96.3%。溶液中加入少量聚乙烯醇作稳定剂,亚硝酸钠作氧化催化剂。PSFCS的合成条件：Fe/Si摩尔比为2,硅酸活化pH值为2,硅酸活化时间是30-40 min,陈化时间是2-2.5 h。与聚合硫酸铁（PFS）和聚合氯化铝（PAC）比较了处理印染废水的效果,表明PSFCS具有良好的絮凝性能,COD和浊度的去除率分别可达81.4%和96.1%。     

安徽省测震台网系统构成

本文对安徽测震台网的系统构成、子台分布、地震设备情况、传输信道、台网的技术系统功能进行了介绍。安徽测震台网部的建成,使得地震监控能力得到更大的提升,在安徽省地震应急中必将发挥积极的作用。     

古黄河泗阳段流域综合治理与生态环境保护

通过采取"治、退、拆、清、修、整、建、营、养、植"等生态修复综合措施、建立古黄河生态保护圈,加强古黄河泗阳段周边环境的生态保护,进一步净化水体环境,同时增加古黄河泗阳段蓄水量,提高水质的稳定性,使得社会效益、环境效益和经济效益达到最佳统一,实现水资源的持续利用.同时改善古黄河地区的空气环境,给古黄河地区的人民一个蓝天,实现古黄河泗阳地区的蓝天碧水.     

关于灾害管理学的几点想法

随着社会经济的发展,我国各种自然灾害的发生有规模大、损失严重的趋势,加强灾害管理对于建立和谐社会意义重大.本文在总结前人工作的基础上,阐述了灾害管理的含义、灾害管理系统的自组织性和协同性,概括了灾害管理的一般方法,指出灾害管理是发展管理.     

Effects of grazing and fencing on carbon and nitrogen reserves in plants and soils of alpine meadow in the three headwater resource regions

Knowledge about carbon and nitrogen in plants and soils and response to fence and graze in alpine ecosystems is still rudimentary because of extremely geographic situation. The purpose of this study was to compare the difference among carbon, nitrogen concentration, and content of unit area and dynamics of above- and below-ground biomass, soil organic carbon and total nitrogen between fencing and grazing alpine meadow. The results showed that total carbon and C: N radio in the aboveground tissue were significantly higher in fenced and ungrazing grassland (FU) than those in free grazing grassland (FG). In addition, the order of total carbon and nitrogen concentration of aboveground tissue of different function groups were not identical between them; The total carbon storage (TCS) per unit of aboveground tissue, roots and 0–30 cm soil layer increased after being fenced for 5 years from free grazing grassland (9255.17 g/m²) to fenced and ungrazing grassland (12637.10 g/m²) by 26.79%. The corresponding total nitrogen storage (TNS) increased by 751.42 g/m². Furthermore over 95% TCS (TNS) come from 0–30 cm soil layer. However there were no significant differences between fenced and ungrazing grasslands of 10 years and 5 years. Therefore fenced to exclude grazing by Tibetan sheep and yaks was an alternative approach to sequester C to the soil in alpine meadow systems.     

Migration drivers in mountain regions in the context of climate change:A case study in Shangnan County of China

Climate change has become widely accepted as a challenge that humans will face in the not-too-distant future.Mountain ecosystems and their inhabitants are among the most vulnerable to climate change.This paper seeks to explain migration drivers in specific mountain regions in the context of climate change based on Foresight’s conceptual framework.A climate change sensitive field named Shangnan County in southern Shaanxi Province is chosen as the case study area to investigate local migration drivers.A series of qualitative research methods is employed in the case study including participant observation,semi-structured interviews,and focus group discussions.The evidence of survey suggests that migration decisions are not only shaped by macro factors in aspects of environmental,economics,demographic,social,politics and psychological,but also influenced by placed-related barriers and facilitating mechanisms and personal characteristics.     

Development of Customized Fire Behavior Fuel Models for Boreal Forests of Northeastern China

Knowledge of forest fuels and their potential fire behavior across a landscape is essential in fire management. Four customized fire behavior fuel models that differed significantly in fuels characteristics and environmental conditions were identified using hierarchical cluster analysis based on fuels data collected across a boreal forest landscape in northeastern China. Fuel model I represented the dense and heavily branched Pinus pumila shrubland which has significant fine live woody fuels. These forests occur mainly at higher mountain elevations. Fuel model II is applicable to forests dominated by Betula platyphylla and Populus davidiana occurring in native forests on hill slopes or at low mountain elevations. This fuel model was differentiated from other fuel models by higher herbaceous cover and lower fine live woody loading. The primary coniferous forests dominated by Larix gmelini and Pinus sylvestris L. var. mongolica were classified as fuel model III and fuel model IV. Those fuel models differed from one another in average cover and height of understory shrub and herbaceous layers as well as in aspect. The potential fire behavior for each fuel model was simulated with the BehavePlus5.0 fire behavior prediction system. The simulation results indicated that the Pinus pumila shrubland fuels had the most severe fire behavior for the 97th percentile weather condition, and had the least severe fire behavior under 90th percentile weather condition. Fuel model II presented the least severe fire potential across weather conditions. Fuel model IV resulted in greater fire severity than Fuel model III across the two weather scenarios that were examined.     

Optimal production and pricing policy for a closed loop system

A closed loop system is investigated, in which the manufacturer has two channels to satisfy the demand: manufacturing brand-new products and remanufacturing returns into as-new products. Remanufactured products have no difference from brand-new products and can be sold in the same market at the same price. The demand is uncertain and sensitive to the selling price, while the return is also stochastic and sensitive to the acquisition price of used products. A mathematical model is developed to maximize the overall profit of the system by simultaneously determining the selling price, the production quantities for brand-new products and remanufactured products, and the acquisition price of used products. Some properties of the problem are analyzed, based on which a solution procedure is presented. Through a numerical example, the impacts of the uncertainties of both demand and return on the production plan, selling price, and the acquisition price of used products are analyzed.