活性粉末脱硝剂制备及其催化还原NOx性能

采用熔化分散冷凝法微胶囊技术以蜂蜡为壳材包覆高锰酸钾作为活性添加剂,铵盐、干燥剂、活性添加剂和助燃剂以100：25：2：1的比例混合制备粉末脱硝剂,将其喷入模拟烟气中进行催化还原NOx实验并确定了最佳反应条件：当模拟烟气流量为4.8 m3·h-1,反应温度600~900℃,氨氮物质的量之比1.15：1,活性添加剂质量分数1.5%,进口烟气NO浓度为500 mg·m-3时,NOx转化率最高,可达90%以上。活性粉末催化还原NOx反应温度窗口宽、NOx转化率高,投资低,有望适应我国中小型燃煤锅炉脱硝需求。     

沙柳活性炭纤维的制备与表征

以（NH4）2HPO4活化沙柳纤维制备活性炭纤维,L16（45）正交实验优化制备工艺条件,重点研究了活化温度对活性炭纤维结构的影响。同时应用扫描电镜（SEM）对其表面形貌进行表征,通过N2吸附-脱附测定其孔结构。结果表明,随着活化温度的升高,活性炭得率逐渐减小,碘吸附值先增大后减小,在浸渍比2.5：1、预氧化温度200℃、预氧化时间90 min、活化温度为800℃、活化时间60 min的条件下,可以制备出比表面积为1 304 m2·g-1、总孔容为1.004 cm3·g-1、得率为31.6%、碘吸附值为1 321 mg·g-1的纤维状活性炭。     

铁碳材料还原NO络合吸收体系中Fe(Ⅲ)EDTA的性能

在湿法烟气脱硝中,Fe（Ⅱ）EDTA是一种常用的螯合剂,对NO有良好的络合吸收能力,但是Fe（Ⅱ）EDTA容易被O2氧化成对NO无络合能力的Fe（Ⅲ）EDTA。因此,选择合适的还原剂实现Fe（Ⅲ）EDTA的高效还原是络合脱硝的关键技术之一。比较了铁碳（Fe/AC）和铁粉（Fe）在不同搅拌速度下对Fe（Ⅲ）EDTA的还原,系统探讨了铁碳质量比、O2浓度、铁碳中Fe与Fe（Ⅲ）EDTA的摩尔比、pH值和Fe（Ⅲ）EDTA初始浓度对铁碳还原Fe（Ⅲ）EDTA的影响,考察了Fe/AC投加前后NO吸收效率的变化,同时通过BET、XRD表征技术对铁碳材料进行了分析。结果表明：Fe/AC能很好地再生Fe（Ⅱ）EDTA,从而提高NO吸收效率。提高搅拌速度、铁碳中Fe与Fe（Ⅲ）EDTA的摩尔比、Fe（Ⅲ）EDTA初始浓度,Fe（Ⅲ）EDTA的还原速率会相应增大;O2浓度及pH增大会降低Fe（Ⅲ）EDTA的还原速率。表征结果表明,铁碳表面形成的氢氧化物为γ-FeOOH。     

Field crops (Ipomoea aquatica Forsk. and Brassica chinensis L.) for phytoremediation of cadmium and nitrate co-contaminated soils via rotation with Sedum alfredii Hance

Environmental Science and Pollution Research - Phytoremediation coupled with crop rotation (PCC) is a feasible strategy for remediation of contaminated soil without interrupting crop production....     

Heavy metal (Cu,Cd, Pb,Cr) washing from river sediment using biosurfactant rhamnolipid

Heavy metal-contaminated sediments posed a serious threat to both human beings and environment. A biosurfactant, rhamnolipid, was employed as the washing agent to remove heavy metals in river sediment. Batch experiments were conducted to test the removal capability. The effects of rhamnolipid concentration, washing time, solution pH, and liquid/solid ratio were investigated. The speciation of heavy metals before and after washing in sediment was also analyzed. Heavy metal washing was favored at high concentration, long washing time, and high pH. In addition, the efficiency of washing was closely related to the original speciation of heavy metals in sediment. Rhamnolipid mainly targeted metals in exchangeable, carbonate-bound or Fe-Mn oxide-bound fractions. Overall, rhamnolipid biosurfactant as a washing agent could effectively remove heavy metals from sediment.

     

Toxicity and bioaccumulation of copper in three green microalgal species

The effective concentrations of copper on the inhibition of the growth of Scenedesmus obliquus, Chlorella pyrenoidosa and Closterium lunula at 96 h (96 h EC50) were determined to be 50, 68 and 200 microg/l, respectively. The low initial bioaccumulation of Cu by C. lunula was found to be responsible for its tolerance to Cu. The amount of Cu accumulated by all three microalgae reached the maximum value and decreased quickly after the peak followed by a slow decrease over the next 6 d. Bioaccumulation of Cu by C. lunula was directly proportional to the initial Cu concentration. After reaching the first peak after 1 d, the bioconcentration factor of Cu by microalgae declined to its minimum value during the exponential growth phase but increased in the stationary growth phase again. This indicates that desorption of Cu from microalgae was higher during the exponential growth phase but lower in the stationary growth phase. Smaller microalgae with low 96 h EC50 values are more efficient in removing Cu from wastewater.     

Contents and sources of polycyclic aromatic hydrocarbons and organochlorine pesticides in vegetable soils of Guangzhou, China

We investigated contents, distribution and possible sources of PAHs and organochlorine pesticides (Ops) in 43 surface and subsurface soils around the urban Guangzhou where variable kinds of vegetables are grown. The results indicate that the contents of PAHs (16 US EPA priority PAHs) range from 42 to 3077 microg/kg and the pollution extent is classified as a moderate level in comparison with other investigations and soil quality standards. The ratios of methylphenanthrenes to phenanthrene(MP/P), anthracene to anthracene plus phenanthrene (An/178), benz[a]anthracene to benz[a]anthracene plus chrysene (BaA/228), indeno[1,2,3-cd]pyrene to indeno[1,2,3-cd]pyrene plus benzo[ghi]perylene (In/In+BP) suggest that the sources of PAHs in the soil samples are mixed with a dominant contribution from petroleum and combustion of fossil fuel. The correlation analysis shows that the PAHs contents are significantly related to total organic carbon contents (TOC) (R2=0.75) and black carbon contents (BC) (R2=0.62) in the soil samples. Dichlorodiphenyltrichloroethane and metabolites (DDTs) and hexachlorocyclohexanes and metabolites (HCHs) account largely for the contaminants of OPs. The concentrations of DDTs range from 3.58 to 831 microg/kg and the ratios for DDT/(DDD+DDE) are higher than 2 in some soil samples, suggesting that DDT contamination still exists and may be caused by its persistence in soils and/or impurity in the pesticide dicofol. The concentrations of HCHs are 0.19-42.3 microg/kg.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

降酚菌株的固定化细胞处理含酚废水的性能研究

用海藻酸钠作为载体将一株降酚菌株进行固定化包埋。利用正交实验确定了该菌株固定化细胞制备的最优条件。研究表明,该降酚菌株的固定化细胞对苯酚的降解能力和耐受能力均大于游离细胞。降酚菌株固定化细胞降解苯酚的最适温度范围是30~35℃,最适pH值范围为6~8。该菌株的固定化细胞对废水中的COD也具有良好的降解效果。     

催化湿式氧化法处理糖蜜酒精废液的研究

以非贵金属Cu、Fe、Mn和Ce为主要活性成分和TiO2、-γA l2O3为载体,制备了10种用于催化湿式氧化法处理糖蜜酒精废液的催化剂。考察了载体、焙烧温度、成分配比对催化剂催化活性与稳定性的影响,研究了氧气分压、催化剂投加量、反应温度和反应时间对催化湿式氧化过程的影响规律。结果表明:(1)Fe-Mn/-γA l2O3(3∶1∶1)催化剂是催化湿式氧化法处理糖蜜酒精废液的可选催化剂;(2)适宜的氧气供应量为理论需氧量的3.4~4.6倍,催化剂的投加量以10 g/L为佳;在300℃下反应30 m in或在280℃下反应60 m in,处理水可达到污水综合排放标准GB9878-1996的三级标准。