Synthesis, characterization and experimental investigation of Cu-BTC as CO2 adsorbent from flue gas

Porous Cu-BTC material was synthesized by the solvothermal method. Powder X-ray diffraction (PXRD) was used to test the phase purity of the synthesized material and investigate its structural stability under the influence of flue gas components. The thermal stability of the material was determined through thermal gravimetric (TG) analysis. Scanning electron microscopy (SEM) was employed to study the microstructure of the material. Cu-BTC was demonstrated not only to have high CO₂ adsorption capacity but also good selectivity of CO₂ over N₂ by means of packed bed tests. The adsorption capacity of Cu-BTC for CO₂ was about 69 mL/g at 22°C. The influence of the main flue gas components on the CO₂ capacity of the material were discussed as well.     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

Effects of rare earth elements La and Yb on the morphological and functional development of zebrafish embryos

In recent years, with the wide applications and mineral exploitation of rare earth elements, their potential environmental and health effects have caused increasing public concern. Effect of rare earth elements La and Yb on the morphological and functional development of zebrafish embryos were studied. The embryos were exposed to La³⁺ or Yb³⁺ at 0, 0.01, 0.1, 0.3, 0.5 and 1.0 mmol/L, respectively. Early life stage parameters such as egg and embryo mortality, gastrula development, tail detachment, eyes, somite formation, circulatory system, pigmentation, malformations, hatching rate, length of larvae and mortality were investigated. The results showed La³⁺ and Yb³⁺ delayed zebrafish embryo and larval development, decreased survival and hatching rates, and caused tail malformation in a concentration-dependent way. Moreover, heavy rare-earth ytterbium led to more severe acute toxicity of zebrafish embryo than light rare-earth lanthanum.     

Theoretical study on the reaction mechanism of ozone addition to the double bonds of keto-limonene

The reaction mechanism of ozone (O₃) addition to the double bonds of gas phase keto-limonene was investigated using ab initio methods. Two different possibilities for O₃ addition to the double bond were considered and two corresponding van derWaals complexes (Complex 1 and Complex 2) were found for 1-endo and 2-endo. The rate constants were calculated using the transition state theory at the CCSD(T)/6-31G(d) + CF//B3LYP/6-31G(d,p) level. The high-pressure limit of the total rate constant at 298 K was 3.51 × 10^-16 cm³/(molecule sec), which was in a good agreement with the experimental data.     

Diversity of methanotrophs in a simulated modified biocover reactor

A simulated landfill biocover microcosm consisting of a modifying ceramsite material and compost were investigated. Results show that the mixture can improve the material porosity and achieve a stable and highly efficient (100%) methane oxidation over an extended operating period. The diversity of the methanotrophic community in the microcosm was assessed. Type I methanotrophs were enhanced in the microcosm due to the increased air diffusion and distribution, whereas the microbial diversity and population density of type II methanotrophs were not significantly affected. Moreover, the type I methanotrophic community structure significantly varied with the reactor height, whereas that of type II methanotrophic communities did not exhibit a spatial variation. Phylogenetic analysis showed that type I methanotroph-based nested polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) resulted in the detection of eight different populations, most of which are related to Methylobacter sp., whereas that of type II resulted in the detection of nine different populations, most of which are related to Methylocystaceae. Methanotrophic community analysis also indicated that a number of new methanotrophic genera not closely related to any known methanotrophic populations were present.     

Adsorption of mixed cationic-nonionic surfactant and its effect on bentonite structure

The adsorption of cationic-nonionic mixed surfactant onto bentonite and its effect on bentonite structure were investigated. The objective was to improve the understanding of surfactant behavior on clay mineral for its possible use in remediation technologies of soil and groundwater contaminated by toxic organic compounds. The cationic surfactant used was hexadecylpyridinium bromide (HDPB), and the nonionic surfactant was Triton X-100 (TX100). Adsorption of TX100 was enhanced significantly by the addition of HDPB, but this enhancement decreased with an increase in the fraction of the cationic surfactant. Part of HDPB was replaced by TX100 which decreased the adsorption of HDPB. However, the total adsorbed amount of the mixed surfactant was still increased substantially, indicating the synergistic effect between the cationic and nonionic surfactants. The surfactant-modified bentonite was characterized by Brunauer-Emmett-Teller specific surface area measurement, Fourier transform infrared spectroscopy, and thermogravimetric-derivative thermogravimetric/differential thermal analyses. Surfactant intercalation was found to decrease the bentonite specific surface area, pore volume, and surface roughness and irregularities, as calculated by nitrogen adsorption-desorption isotherms. The co-adsorption of the cationic and nonionic surfactants increased the ordering conformation of the adsorbed surfactants on bentonite, but decreased the thermal stability of the organobentonite system.     

Characterizing the optimal operation of photocatalytic degradation of BDE-209 by nano-sized TiO2

Brominated flame retardants have been widely used in industry. There is a rapid growing public concern for their availabilities in the environment. Advanced oxidation process (AOP) is a promising and efficient technology which may be used to remove emerging chemicals such as brominated flame retardants. This project aims at investigating optimal operational conditions for the removal of BDE-209 using nano-scaled titanium(IV) oxide. The residual PBDE congeners after photocatalytical degradation of BDE-209 by TiO₂ were analysed by gas chromatography-mass spectrometry (GC-MS). It was found that the degradability of BDE-209 by TiO₂ was attributed to its photocatalytic activity but not the small size of the particles. The half-life of removing BDE-209 by TiO₂ was 3.05 days under visible light. Tetra- and penta-BDEs were the major degraded products of BDE-209. Optimum conditions for photocatalytical degradation of BDE-209 was found to be at pH 12 (93% ± 1%), 5, 10, 20 mg/L (93.0% ± 1.70%, 91.6% ± 3.21%, 91.9% ± 0.952%, respectively), respectively of humic acid and in the form of anatase/rutile TiO₂ (82% ± 3%). Hence, the efficiency of removing BDE-209 can be maximized while being cost effective at the said operating conditions.     

Fractionation of residual Al in natural water treatment from reservoir with poly-aluminum-silicate-chloride (PASiC): Effect of OH/Al, Si/Al molar ratios and initial pH

An aluminum fractionation study was conducted for a surface reservoir water treatment to understand the performance of poly-aluminum-silicate-chloride (PASiC) in terms of the residual Al fractions as a function of initial pH. The coagulation performance expressed as turbidity and organic matter removal was established as supporting data. Some extra data were evaluated in terms of the residual Al ratio of the composite PASiC coagulant. The main residual Al sources were the Al fractions derived from the use of PASiC. The turbidity and organic matter removal ability was optimal at initial pH 6.00-7.00, while the concentrations of various residual Al species and the residual Al ratio of PASiC were minimal at an initial pH range of 7.00-8.00. Under the conditions of OH/Al molar ratio = 2.00 and Si/Al molar ratio = 0.05, PASiC had superior coagulation performance and comparatively low residual Al concentrations. The Al fraction in the composite PASiC coagulant seldom remained under such conditions. Experimental data also indicated that the suspended (filterable) Al fraction was the dominant species, and organic-bound or organo-Al complex Al was considered to be the major species of dissolved Al in water treated by PASiC coagulation. Additionally, the dissolved inorganic monomeric Al species dominated the dissolved monomeric Al fraction.     

Fatty acids and algal lipids as precursors of chlorination by-products

Six common algal fatty acids (FAs) with different numbers of double bonds, lipophilic fractions and proteins extracted from the diatom Navicula pelliculosa and algal cells were chlorinated to evaluate their potential in generating disinfection by-products (DBPs). The result showed that the more double bonds in the FAs, the higher the amounts of chloroform and dichloroacetic acid (DCAA) produced, but such a pattern was not observed for trichloroacetic acid (TCAA). Based on the previously reported composition of fatty acids in algal lipids, the DBP generation potentials of algal lipids were calculated. These predicted values were much lower than those measured in the chlorinated algal lipophilic fraction, suggesting unknown lipophilic fraction(s) served as potent DBPs precursors. Another calculation attempted to predict DBP production in algal cells based on algal lipid and protein composition, given quantified measured DBP production per unit algal lipid and proteins. The analysis showed that the observed DBP production was similar to that predicted (< 35% difference), suggesting that algal biochemical compositions may serve as a bioindicator for preliminary estimation of chloroform, DCAA and TCAA formation upon chlorinating algae.     

广东东江流域多氯萘的大气沉降研究

为考察多氯萘(PCNs)通过大气沉降作用对东江流域的影响,利用通用型大气沉降采样器,在东江流域广东省境内代表性地段布设11个采样点,于2010年冬季(1、2月)和夏季(7、8月)分别采集和分析了沉降样品中PCNs的通量及组成.结果表明,东江流域总PCNs日均沉降通量为828 pg.(m2.d)-1,对应毒性当量(TEQ)为0.14 pg.(m2.d)-1,由此估算东江流域广东境内PCNs年沉降总量为8.5 kg,相应TEQ年沉降总量为1.3 g.地域上,广州和东莞地区沉降通量明显高于惠州,同时城镇采样点的沉降通量显著高于农村;季节上,各采样点总体呈现夏季高于冬季的特点;组成上,三氯萘(tri-CNs)是主要的污染物,占总量的50%以上,但广州、东莞的5～8氯萘含量比惠州高.来源分析表明,东江流域PCNs的大气沉降可能受燃烧源与非燃烧源的共同影响;东莞大气沉降中PCNs多来自燃烧源,广州点大气沉降的PCNs以非燃烧源为主.