MnxCe1-xO2／γ-Al2O3催化剂的制备及其催化甲苯的燃烧性能

以γ-Al2O3为载体,以MnxCe1-xO2为催化活性组分,采用浸渍法制备了一系列负载型MnxCe1-xO2／γ-Al2O3催化剂（x=0、0．2、0．4、0．6、0．8、0．9、1）,在固定床反应器中评价了催化剂对甲苯的催化燃烧性能。结果表明,MnxCe1-xO2／γ-Al2O3催化剂的催化活性与催化剂的焙烧温度、活性组分MnxCe1-xO2的负载量以及Mn、Ce摩尔比有显著关系,其中焙烧温度550℃、负载量为20％、Mn、Ce摩尔比为4：1时,即MnxCe1-xO2／γ-Al2O3催化剂对甲苯的催化性能最佳,反应温度为180℃时,甲苯的转化率达到95％。并在连续100h的稳定性操作后,催化剂的活性基本无变化。采用XRD、BET以及SEM等分析测试手段对催化剂的结构以及表面进行了表征。     

陶瓷印花废水处理的混凝剂及工艺条件

采用混凝剂聚合氯化铝（PAC）、聚丙烯酰胺（PAM）、聚合硫酸铁（PFS）对陶瓷印花废水进行混凝沉降处理,监测水样的吸光度、浊度、悬浮物,以脱色率、浊度去除率、悬浮物去除率评价混凝处理的效果。结果表明：PAC是陶瓷印花废水沉降处理的理想混凝剂;水样的吸光度、浊度、悬浮物随混凝剂用量增大和沉降时间延长而呈降低趋势,而脱色率、浊度去除率、悬浮物去除率随混凝剂和沉降时间的增大呈增大的趋势;PAC投加量为20mg／L,沉降时间约为24h,水样脱色率达到90．0％,而当PAC投加量达到100mg／L,沉降时间约为4h,陶瓷印花水的脱色率可达到96．0％。证明了药剂用量的增加与沉降时间的延长对混凝过程具有增效作用。     

The adsorption process during inorganic phosphorus removal by cultured periphyton

To explain the detailed process involved in phosphorus removal by periphyton, the periphyton dominated by photoautotrophic microorganisms was employed in this study to remove inorganic phosphorus (P _i ) from wastewater, and the removal kinetics and isotherms were then evaluated for the P _i removal process. Results showed that the periphyton was capable of effectively removing P _i that could completely remove the P _i in 24 h at an initial P _i concentration of 13 mg P L^?1. Furthermore, the P _i removal process by the periphyton was dominated by adsorption at initial stage (~24 h), which involved physical mechanistic process. However, this P _i adsorption process was significantly influenced by environmental conditions. This work provides an insight into the understanding of phosphorus adsorption by periphyton or similar microbial aggregates.

Distribution and ecological risk assessment of organochlorine pesticides in surface sediments from the East Lake,China

Organochlorine pesticides (OCPs) are ubiquitous pollutants, and their presence in urban lakes is a concern for human and ecological health. Surface sediments in the East Lake, China, were collected in winter 2012 and summer 2013 to investigate concentrations, distribution patterns, possible sources, and potential ecological risks of OCPs in this area. The total concentrations of 14 OCPs ranged from 6.3 to 400 ng g^?1 dry weight (dw) with an average concentration of 79 ng g^?1 dw. The mean values of hexachlorocyclohexanes (HCHs) (α-, β-, γ-, and δ-HCH) and dichlorodiphenyltrichloroethanes (DDTs) (p,p’-DDE, p,p’-DDD, and p,p’-DDT) were 36 and 7.6 ng g^?1 dw, accounting for 45 and 10 % of the total OCPs, respectively. The concentrations of OCPs in sediment samples collected in winter were significantly higher than those in summer, especially the HCHs, of which in winter were two times greater than summer. Composition analyses indicated that DDTs and endosulfan were mainly from historical contribution. Historical use of technical HCH and new input of lindane were probably the source of HCHs in the East Lake. Most sampling sites of HCHs and DDTs were found to have the potential ecological risk based on levels specified in the sediment quality standards.     

Degradation of aqueous Rhodamine B by plasma generated along the water surface and its enhancement using nanocrystalline Fe-, Mn-, and Ce-doped TiO2 films

The degradation of aqueous Rhodamine B (RhB) was examined using a dual-channel spark switch module designed to regulate the steepness of pulsed high voltage with microsecond rise time. Depending on the energy per pulse, a spark along the water surface (SPWS) or streamer along the water surface (STWS) was formed. STWS was found to have a better degradation effect and energy efficiency toward RhB than SPWS at the same power; however, addition of H₂O₂ amounts resulted in increased degradation, the effect being more pronounced using SPWS. The initial concentration of RhB also appeared to influence the rate constant of the degradation reaction. Furthermore, TiO₂ films doped with Fe, Mn, and Ce were found to enhance the degradation performance of plasma. A possible reaction mechanism of plasma formation along the water surface was concluded by determination of the main inorganic products in the liquid and gas phases.     

负载纳米TiO_2凹凸棒黏土的制备表征及对Mn~(2+)的吸附性能

以溶胶-凝胶法制备了负载纳米TiO2凹凸棒黏土吸附剂,采用SEM、XRD等分析方法对负载纳米TiO2凹凸棒黏土前后的结构进行了表征,并对Mn2+进行了吸附性能的研究。结果表明:经过高温焙烧后的负载纳米TiO2凹凸棒黏土吸附剂较负载前的凹凸棒黏土,因其结构中的结晶水和沸石水脱失,内部孔道面积和表面积增加,活性吸附位点的数量增大,吸附能力有了明显提高。在室温条件下(20~25℃),pH为5~6,吸附平衡时间为120 min时,负载纳米TiO2凹凸棒黏土吸附剂对Mn2+有较好的吸附效果。     

蚯蚓生态滤池中蚯蚓与植物对污水净化的作用评估

构建具有不同蚯蚓和植物配置的4个单级蚯蚓生态滤池,依次编号为A(无蚯蚓无植物)、B(有蚯蚓无植物)、C(有蚯蚓栽种芦苇)和D(有蚯蚓栽种水生鸢尾)。通过比较4个滤池在6个月实验期间对化学需氧量(COD)和总氮(TN)的去除效率,系统分析蚯蚓和植物对滤池去除污染物的影响。实验分2个阶段进行:5月上旬至9月上旬,滤池进水碳氮比恒定为6;9月中旬至11月中旬,滤池每周进水碳氮比交替为3、6、9。研究结果表明,蚯蚓对滤池去除COD有一定的促进作用,且作用强度显著受到进水碳氮比的影响。植物的存在与种类对滤池去除COD效率没有显著影响。蚯蚓和植物对滤池的TN去除效率都没有显著影响。滤池进水的碳氮比是显著影响滤池去除TN效率的主要因素。     

Recycling of WEEE plastics: a review

Electric and electronic equipment (EEE) is swiftly growing in volume, level of sophistication, and diversity. Also, it evolves briskly, moved by innovation and technical change, and draws on numerous and at times rare resources. Waste EEE (WEEE) has evolved into an important societal problem. Recycling and treating WEEE implies occupational as well as environmental hazards that are still incompletely documented. Still, second hand EEE has been exported and treated in Africa, China, and India in a precarious informal context. In developed countries, EEE recycling has been sustained by a wide range of initiatives and motives, such as sustainability, creating jobs, and the value of precious or rare metals. Current EU Directives require a steep reduction of WEEE plastics (WEEP) going to landfill. Mechanical, thermal, and feedstock recycling of WEEP are analysed and some options confronted. Plastics recycling should be weighed against the eventual risks related to their hazardous ingredients, mainly legacy brominated fire retardants and heavy metals. Another paper is related to a somewhat similar problem, yet involving a different mix of plastics: recycling plastics from automotive shredder residue.     

Ce-PbO_2/C电极的制备及其去除水中酸性红B

采用电沉积法制备铈修饰的PbO2/C电极,通过SEM、XRD、XPS及循环伏安对PbO2/C、Ce-PbO2/C电极进行表征,结果表明,Ce-PbO2/C电极比PbO2/C颗粒细小,表面均匀致密,电化学氧化能力较强,修饰电极中Ce以CeO2的形态存在。以Ce-PbO2/C为工作电极,电解浓度为1 000 mg/L的高盐酸性红B模拟活性染料废水,考察了电压、pH、电解质浓度、极间距对脱色率、氨氮去除率及COD去除率的影响。确定适宜工艺条件为：初始酸性红B溶液浓度为1 000 mg/L,pH值为6,电压10 V,电解时间1 h,电极间距1.5 cm,该条件下脱色率、氨氮去除率和COD去除率分别为99.98%、97.23%和90.17%。通过UV-Vis及GC-MS初步分析了降解过程可能存在的中间产物及降解途径。     

漆酶对活性黑KN-B和直接大红染料的脱色性能

利用白腐真菌漆酶对活性黑KN-B和直接大红2种偶氮染料进行脱色实验。考察反应时间、加酶量、pH值、染料浓度、温度对脱色率的影响,研究了ABTS介体以及金属离子存在下的脱色效果,并分析了漆酶脱色的动力学性能以及其对偶氮染料的降解规律。结果表明,活性黑KN-B和直接大红脱色适宜条件为：反应时间为30 min,加酶量8 U/mL,pH=7,染料浓度分别为50 mg/L和80 mg/L,温度40~45℃。ABTS介体对酶促偶氮染料脱色没有明显促进作用。Fe²⁺对漆酶脱色有较强的抑制作用;Cu²⁺对漆酶催化活性黑KN-B促进作用较大,对直接大红影响较小。漆酶对2种染料的脱色反应符合米氏方程,其催化活性黑KN-B和直接大红染料的K_m值分别为114.81 mg/L,317.5 mg/L,v_max值分别为6.57 mg/（L·min）和26.0 mg/（L·min）。