China-Indian Silk Trade： Current Production and Future Prospects

As an important traditional labor-intensive industry of both India and China, the cocoon silk industry has long made great contributions to the ecological environment protection, rural economic development and the increase in export income of both countries. India is not only a very important cocoon silk trading partner, but an important production competitor of China. In recent years, there has been a large increase in the production and trade of the cocoon silk between China and India; however, China relies heavily on Indian market, which leads to a tendency of further deterioration in the silk trade environment between both countries. The present article makes an empirical study of the cocoon silk resources of the two countries and the scale, product mix and market structure of China-Indian silk trade from 2001 to 2007. Overall silk trading volumes from China to India and market concentration rate are on the increase because of the superiority of Chinese cocoon silk production over that of India. Owing to scattered market share and export that mainly focused on raw materials product, there has been a phenomenon of price reduction and quantity increase. India carries out fierce competition with China in the international market and even imposes antidumping sanction on Chinese silk, which are key factors restricting further increase between China-India trade. Based on the abovementioned facts, the authors aim to put forward suggestions for steadily developing the production and trade of China＇s silk.     

Influences of chemical activators on incinerator bottom ash

This research has applied different chemical activators to mechanically and thermally treated fine fraction (<14 mm) of incinerator bottom ash (IBA), in order to investigate the influences of chemical activators on this new pozzolanic material. IBA has been milled and thermally treated at 800 degrees C (TIBA). The TIBA produced was blended with Ca(OH)(2) and evaluated for setting time, reactivity and compressive strength after the addition of 0.0565 mole of Na(2)SO(4), K(2)SO(4), Na(2)CO(3), K(2)CO(3), NaOH, KOH and CaCl(2) into 100g of binder (TIBA+Ca(OH)(2)). The microstructures of activated IBA and hydrated samples have been characterized by X-ray diffraction (XRD) and thermogravimetry (TG) analysis. Thermal treatment is found to produce gehlenite (Ca(2)Al(2)SiO(7)), wollastonite (CaSiO(3)) and mayenite (Ca(12)Al(14)O(33)) phases. The thermally treated IBA samples are significantly more reactive than the milled IBA. The addition of Na(2)CO(3) can increase the compressive strength and calcium hydroxide consumption at 28-day curing ages. However, the addition of Na(2)SO(4), K(2)SO(4), K(2)CO(3), NaOH and KOH reduces the strength and hydration reaction. Moreover, these chemicals produce more porous samples due to increased generation of hydrogen gas. The addition of CaCl(2) has a negative effect on the hydration of TIBA samples. Calcium aluminium oxide carbonate sulphide hydrate (Ca(4)Al(2)O(6)(CO(3))(0.67)(SO(3))(0.33)(H(2)O)(11)) is the main hydration product in the samples with activated IBA, except for the sample containing CaCl(2).     

饮食业油烟道火灾的模糊事件树分析

对饮食业油烟道火灾事故进行事件树分析时,历史数据的缺乏常常导致无法进行事件序列的定量计算.针对这一问题,利用专家对事故的模糊评判,引入模糊事件树进行定量计算研究.在模糊集理论的基础上,结合德尔菲法和判断矩阵法, 将模糊性语言转换为三角模糊数或梯形模糊数,应用模糊数截集以及模糊数清晰化方法,对后果事件发生概率进行计算.研究表明,饮食业油烟道火灾事故概率的模糊事件树分析是切实可行的,有助对饮食业油烟道火灾的认识、预防和扑救工作.     

固定化生物活性炭纤维处理洗浴废水的研究

采用混凝-砂滤-固定化生物活性炭纤维的组合处理工艺来处理洗浴废水.利用聚合氯化铝和聚丙烯酰胺为混凝剂对废水进行混凝处理,之后将废水通入砂滤柱,废水在曝气池进行曝气后进入固定化生物活性炭纤维(IBACF)单元.IBACF固定化完成后,连续运行30 d,去除率稳定之后,处理后的浊度、LAS、S0D_(Mn)平均值分别为2.2NTU、0.12 mg·L~(-1)、2.33 mg·L~(-1),平均去除率分别为95.2%、94.7%、84.8%.经处理后的洗浴废水各项指标均可以达到生活饮用水卫生标准或城市供水水质标准,可以直接回用于洗浴用水和其他生活杂用水.     

MnxCe1-xO2／γ-Al2O3催化剂的制备及其催化甲苯的燃烧性能

以γ-Al2O3为载体,以MnxCe1-xO2为催化活性组分,采用浸渍法制备了一系列负载型MnxCe1-xO2／γ-Al2O3催化剂（x=0、0．2、0．4、0．6、0．8、0．9、1）,在固定床反应器中评价了催化剂对甲苯的催化燃烧性能。结果表明,MnxCe1-xO2／γ-Al2O3催化剂的催化活性与催化剂的焙烧温度、活性组分MnxCe1-xO2的负载量以及Mn、Ce摩尔比有显著关系,其中焙烧温度550℃、负载量为20％、Mn、Ce摩尔比为4：1时,即MnxCe1-xO2／γ-Al2O3催化剂对甲苯的催化性能最佳,反应温度为180℃时,甲苯的转化率达到95％。并在连续100h的稳定性操作后,催化剂的活性基本无变化。采用XRD、BET以及SEM等分析测试手段对催化剂的结构以及表面进行了表征。     

碱式硫酸铝溶液中SO42-的测定

建立了以铬黑T为指示剂,乙二胺四乙酸二钠反滴定过量BaCl₂的碱式硫酸铝溶液中SO₄^2-的测定方法。实验确定的操作条件为：待测试样稀释后ρ（SO_4^2-）为0.025 ~0.100 g/L,BaCl₂过量率为25%~100%,并且在加入BaCl₂前将试样煮沸,三乙醇胺加入量为0.10 L/L。该法回收率在98.90%~100.72%,相对标准偏差小于1%。测定方法准确,可靠,且操作简便、快速。     

钼矿区周边农田土壤中重金属污染状况的分析与评价

对钼矿区周边农田土壤重金属污染情况进行了详细研究.选择该矿区受污染农田土壤样本80个,采用HNO3-HF-HClO4混酸对土壤样品进行处理,运用欧共体参比司推荐的BCR三步连续提取法进行化学形态分析;使用等离子体发射光谱仪(ICP-AES)测定土壤样品中Mo、Pb、As、Hg、Cr、Cd、Zn、Cu、Ni的全量及各种化学形态的含量并进行评价,同时对矿区地下水进行分析;采用spas软件进行数据分析.结果表明,矿山周边农田土壤重金属主要污染物为Cd、Hg并伴有Cr污染;Nemerow综合指数6.81,综合评价结果为该区土壤已受严重污染;Cd与As污染来源基本相同,Cu、Ni、Zn污染来源基本相同,Hg有独立的污染来源;重金属中化学形态分布为残余态>有机结合态>氧化结合态>酸可提取态;重金属Cr及Hg的有效态比例较大,可能会影响农作物的正常生长;矿山周边农田土壤重金属污染的原因可能是污染地下水的浇灌,矿石的开采、运输和大气降尘等过程;有机农药及塑料农用制品的施用过程,自然成土、矿物的伴生及其转化等过程.     

A comparative study on milk packaging using life cycle assessment: from PA-PE-Al laminate and polyethylene in China

A Life Cycle Assessment (LCA) approach was used to compare the environmental impacts in the life cycle of two milk packaging systems, PA-PE-Al laminate—a laminated foil made from paper, polyethylene and aluminum foil—and polyethylene. The data for the mass, energy fluxes and environmental emissions were obtained from published literature and from site investigations, for the two systems being analyzed for environmental impacts. The application of LCA using Eco-Indicator 99 has made the comparison of the environmental impacts of the two milk packages possible. The results of this LCA study are discussed and the results reveal that the composite packaging has a slightly higher environmental impact than the plastic one. In addition, the environmental impact of raw material extraction is the highest in all of the life cycle stages except for disposal. The environmental impact of composite packaging mainly comes from the fossil fuels, land use and respiratory inorganics categories, while the plastic packaging mainly comes from the fossil fuels category. However, the composite packaging has a greater environmental impact because it has not been well recycled and reused. This environmental impact could be decreased by developing the technology to separate out polyethylene and aluminum from the packaging.     

宝钢厂区植被碳储量及其固碳效益评价

以著名钢铁企业上海宝钢为例,基于厂区植被调查、航片数字化解释、优势种生物量测定及模型建立,对宝钢厂区植被碳储量和固碳能力进行估算,并通过碳税法对其固碳效益进行评价,以期为城市工业区绿地群落配置和绿化树种选择、企业绿化建设的费用效益分析提供更为科学的依据。结果表明:宝钢厂区植被总碳储量为3992.99～4736.17 t,固碳效益为13507.33～16185.85万元;平均碳密度为45.82～53.27 t/hm2,固碳能力为5.91～6.87t/(hm2.a),高于上海城市森林平均值,但小于中国森林平均值,一定程度上受平均胸径、郁闭度及群落密度等因素影响。厂区在进行绿化建设时,应考虑选择防污且固碳能力强的植物,构建防污固碳兼有型群落,发挥植被的多元功能。     

防弹材料保护套现状及性能测试分析

本文介绍了现代软质防弹材料发展历程及种类,简述了防弹材料防水布使用的作用与目的 ,研究比较了PU、PVC两种涂层的防水布材料的撕破强力、热合牢度、耐静水压、渗水等性能,最终得出使用PU涂层防水布可成为软质防弹材料保护外套的结论。