固定化白腐真菌反应器与接触氧化反应器联用处理癸二酸生产废水

采用固定化白腐真菌(WRF)反应器与接触氧化反应器联用处理癸二酸废水。在WRF反应器中,以汽曝玉米秸秆为载体,并添加铜、铁促进白腐真菌生长和产酶作用,载体的使用寿命约为45 d。在进水苯酚平均质量浓度为69.36 mg/L、平均进水COD为1 648.81 mg/L的条件下,经WRF反应器处理后,苯酚平均质量浓度降至7.59 mg/L,平均出水COD降至478.03 mg/L;再经接触氧化反应器处理后,苯酚平均质量浓度降至1.65 mg/L,平均出水COD降至297.31 mg/L。     

磺化石墨烯对小麦幼苗生长及生理生化指标的影响

随着石墨烯生产量和使用量的不断增大,其对生态环境的风险逐渐引起了环境学家的关注。采用水培试验,探究了磺化石墨烯(SGO)对小麦幼苗的生长、抗氧化酶活性及脂质过氧化的影响。结果表明:在培养10 d后,低浓度磺化石墨烯对小麦根系的生长有显著促进作用(P0.05),200 mg·L-1浓度处理与对照处理相比提高了84.3%,随着浓度增加促进作用逐渐减弱,1 000 mg·L-1时与对照相比提高了19.9%。但对小麦地上部的生长没有影响。磺化石墨烯处理的小麦幼苗根系和叶片组织中超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、过氧化物酶(POD)及丙二醛(MDA)都呈现先下降后上升的趋势。当磺化石墨烯浓度低于200 mg·L-1时,处理组小麦抗氧化酶的活性及MDA含量相对于对照处理大都有所降低,说明低浓度时磺化石墨烯没有对小麦的生长产生氧化胁迫,这与磺化石墨烯可能具有一定的抗氧化能力有关,而高浓度时由于产生氧化胁迫使各项生理生化指标逐渐上升。本实验结果为石墨烯材料对植物的毒理学研究提供了基础数据。     

结构面长期强度确定方法对比研究∗

结构面长期强度的确定对工程岩体长期安全稳定性评价具有重要意义。在对水泥砂浆结构面试件分别进行了不同法向应力条件的剪切应力分级剪切蠕变试验和循环剪切应力松弛试验的基础上,分别利用过渡蠕变法、应力-应变等时曲线法和应力松弛法对结构面的长期强度进行了求解。结果表明:过渡蠕变法确定的长期强度精度依赖于蠕变试验中加载应力级的划分;等时曲线法将长期强度值视为考虑时效作用的屈服强度值,结果偏保守;应力松弛法考虑了循环加载条件应力松弛的终止条件和长期强度之间的关系求得,结果合理明确。该研究对考虑时效作用的工程岩体安全稳定性支护提供设计依据。     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.     

Occupational hazards to health of port workers

Objectives. The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. Methods. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Results. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. Discussion. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.     

RETRACTED:

Jianfeng Li  Sandra M.Y. Lee  Wenmao Liu 《Process Safety and Environmental Protection》2013,91(3):213-220

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

人体装甲测试用模拟破片的应用与发展

模拟破片是人体装甲防弹性能测试评价的主要试验弹体.本文对人体装甲和模拟破片进行了阐释,分析了模拟破片的应用背景,对国内外现状进行了对比分析,对标准模拟破片的确定以及爆炸破片的发展进行了探讨,提出了开展新型模拟破片及其测试技术研究的重要意义.     

医疗保健行业中的纳米材料：职业风险和预防

欧洲职业健康安全署近期发布电子纪要,解释了保健行业工作者在他们工作场所的日常活动中如何与纳米材料发生可能的接触,并提供了预防潜在接触可以采取的措施。这些措施包括国家层面的法律监管、消除与替代、工程控制、管理措施以及个体防护装备（PPE）。作者特编译此文,为国内相关领域提供参考。     

光气生产装置的危险性及事故统计分析

通过对光气、光气化生产工艺过程存在的危险性分析,笔者认为气相光气化工艺比液相光气化工艺危险性小,而固体光气化生产工艺与气、液相光气生产工艺相比,危险性更小。同时对国内外光气和光气化生产发生事故的原因进行分析探讨,指出事故的原因主要是由管道及设备缺陷、个体防护用品缺乏、设计缺陷及人为失误引起。采用固体光气替代光气参与各种有机合成,与液相或气相光气工艺相比具有安全、反应条件温和、易操作、工艺简便、反应计量准确等优点,因此,固体光气工艺发展前景广阔。