Effect of air-drying and oven-drying treatment on Cr(VI) content and Cr bond forms in soil

Air-drying and oven-drying are pretreatment processes often used before testing and analyzing various soil characteristics in the laboratory. This study selected three kinds of soil, including red soil, entisol, and alluvial soil, and examined the variation of the Cr(VI) content and Cr bond forms in these soils during air-drying and oven-drying. The results show that when the soil is air-dried in natural environment, the Cr(VI) content decreases with air-drying time. On day 10 of air-drying, the Cr(VI) content in these soils is 22.8～47.9 % of the initial value. When the soil is oven-dried, the Cr(VI) concentration decays faster; on day 8, the Cr(VI) is no longer detected in these soil samples. When the Cr(VI)-contaminated soil is treated by air-drying and oven-drying, the Cr bond form converts into a more stable form. After oven-drying, the Cr mainly exists in Fe–Mn oxide form, organic bond form, and residual form. The air-drying and oven-drying pretreatment processes of soil reduce the Cr(VI) content and stabilize the Cr bond form. If the laboratory analytic results are applied to risk analysis or remediation strategy planning for chromium-contaminated soil, the toxicity, bioavailability, and mobility of Cr in soil may be underrated.     

清河流域水质目标管理技术应用示范

针对清河流域三级水生态功能分区功能定位和水质保护目标,按照"分类、分区、分级、分期"理念,应用流域水质目标管理技术方法,研究清河流域控制单元污染负荷核定、水环境容量计算与分配、污染负荷削减、污染物总量控制等关键技术应用示范,完善流域水质目标管理技术,为清河流域水环境管理提供科技支撑。     

天津市中心城区集中供应管网末梢水的抗生素耐药基因污染特征研究

为了研究天津市中心城区集中供应管网末梢水的抗生素耐药基因(antibiotic resistance genes,ARGs)污染特征,采集了天津市中心城区6个采样点的管网末梢水样,分别采用微孔滤膜正压过滤法及核酸吸附-洗脱法富集水中细菌和胞外核酸后,利用实时定量PCR技术对15种胞内ARGs和胞外ARGs进行定量检测....     

Levels of black carbon and their relationship with particle number levels—observation at an urban roadside in Taipei City

Information on the relationship between black carbon (BC) and particle number levels in urban areas is limited. Therefore, investigating the relationship between BC and particle number levels in different particle size ranges at an urban area is worthwhile. This study used an aethalometer and scanning mobility particle sizer to measure the levels of BC and particle number simultaneously at an urban roadside in Taipei City. Measurement results show that hourly BC levels are 0.62–8.80 μg m^?3 (mean?=?3.50 μg m^?3) and hourly particle number levels are 4.21?×?10³–4.64?×?10⁴ particles cm^?3 (mean?=?2.00?×?10⁴ particles cm^?3) in Taipei urban area. The BC and particle number levels peak during morning (7:00–9:00) and evening (16:00–18:00) rush hours on weekdays. Low BC and particle number levels exist in the early morning hours. Time variations in BC levels are the same as those of particle number levels in this study, clearly indicating that BC and particles are likely released from the same emission source. Additionally, BC levels in the urban area are more strongly associated with ultrafine particle levels than with total particle number levels, particularly in the size range of 56–180 nm. According to measurement results, most BC in aerosols in urban areas can be in the ultrafine size range.     

Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method

While the innovativeness and market potential of a new product is normally emphasized, its environmental impact is often neglected. Despite their ability to help designers reduce the environmental impact of products throughout their life cycle, many eco-design methods focus on the redesign of existing products, necessitating a more innovative design capacity. This work describes a novel model to accelerate the preliminary eco-innovation product design by integrating the advantages of case-based reasoning and the TRIZ method. Previous cases from a database support a novel design to satisfy functional performances under the CBR framework. The innovative principles and evolution patterns of the TRIZ method can enhance the design level of new products to achieve eco-innovation. Four eco-innovation concepts for a PC mouse demonstrate the effectiveness of the proposed model.     

电旋风除尘模型实验研究

本研究试图将电除尘器与旋风除尘器组合为一体,以求取得较高的除尘效率,并利用旋转气流实现自动清灰。本文介绍了切向进气直流式电旋风除尘的模型试验,通过实测不同工况下的除尘效率和压力损失,应用经典除尘理论,建立了相应的数学模型。     

建立我国重大事故预防控制体系之探讨

简述了我国重大工业事故发生的主要原因，提出了建立重大事故预防控制体系的建议，制定《重大事故预防和控制法》，实行重大危险源上报、登记、评价、分级监察管理，建立国家、省、市三级重大事故应急反应系统和重大危险源动态监控网络系统。     

郫县灰潮田有效硅含量和小麦施硅效应初探

通过同田对比试验，本文对郫县水稻土小麦施用硅肥进行了初步研究．结果表明，小麦施硅获得了增产效果；施硅对小麦穗粒数、株高和基部节间体积等具有生长效应；郫县水稻土有效硅含量为１２７±３９ｍｇ·ｋｇ－１（ｎ＝１２），变异较大，与土壤粘粒（＜０．００１ｍｍ）呈极显著正相关（ｒ＝０．７９）；发育于第四系岷江灰色冲积母质的郫县水稻上，粘粘含量普遍较低，因此，郫县小麦施硅具有较大增产潜力．     

INVESTIGATION OF TURBIDITY MAXIMUM IN A MESOTIDAL ESTUARY,TAIWAN1

ABSTRACT: To comprehend the distributions of salinity, temperature, and suspended sediment in the Danshuei River estuary in Taiwan, monthly field surveys were conducted in 2003. These included several high and low slackwater surveys and intensive surveys. The results show that the Danshuei River estuary is predominately a partially mixed estuary. The highest concentration of suspended sediment is typically observed at the Chung‐Hsin Bridge, the most upstream sampling station. The suspended sediment concentration exhibits a general decreasing trend in the downstream direction. It may be concluded that the sediments mostly come from the upstream reach. A locally high concentration of suspended sediment is found at the Kuan‐Du station because of the local deep channel bathymetry and two‐layered estuarine circulation. A vertical two‐dimensional hydrodynamic and sediment transport model is applied to investigate the tidally averaged salinity distribution, residual circulation, and suspended sediment concentration. The modeling results reveal that, under the Q₇₅ flow condition (i.e., low flow), a turbidity maximum occurs at the Kuan‐Du station due to the strong estuarine circulation. The model simulation with a much higher river flow condition results in a weaker residual circulation and weaker turbidity maximum.     

利用造纸黑液制备水煤浆添加剂

利用造纸黑液中有效成分，经过适当处理制备水煤浆添加剂，并且对添加剂的性能进行了测试。结果表明，依照该工艺生产的添加剂，性能优良，能够满足工业生产需要。