Citrobacter sp. CK3对活性红KN-3B的脱色反应动力学研究

采用脱色菌Citrobacter sp. CK3,以活性红KN-3B染料为处理对象,在厌氧批式反应条件下,系统考察了pH值,温度和染料浓度对脱色反应速度的影响;通过动力学模拟及反应过程中染料的UV-Vis扫描图分析,探讨了脱色反应机理。结果表明：Citrobacter sp. CK3对活性红KN-3B的脱色反应的适宜pH为7～9;脱色反应速度在温度为32℃时达到最大。染料初浓度从57 mg/L逐渐增大到458 mg/L时脱色率逐渐降低。脱色过程中染料的偶氮键发生断裂,脱色反应符合二级反应动力学。     

Effects of different methods of DNA extraction for activated sludge on the subsequent analysis of bacterial community profiles

The effect of different DNA extraction protocols on activated sludge DNA yield and bacterial community composition was evaluated by temperature gradient gel electrophoresis (TGGE). Nine different procedures to extract DNA were compared-sonication (30s), sonication (40s), sonication (50s), freezing-thawing, bead milling, sodium dodecyl sulfate (SDS)-lysozyme, SDS-proteinase K, SDS-lysozyme-proteinase, and a commercial extraction kit. It was found that the TGGE profiles and the DNA band numbers made significant differences via various extraction methods. The yield and purity of DNA extracted by sonication and other physical methods were not satisfactory, while the DNA purity extracted by SDS and other chemical-biological methods were better. Crude DNA extracts isolated by sonication and other physical methods passed the polymerase chain reaction, despite the absence of purification and acquired affluent DNA bands in TGGE. The affluence of bands in TGGE was not consistent with the yield and purification of DNA, but was correlative with extraction protocols. To analyze the activated sludge bacterial community by TGGE fingerprint, it is necessary to make a synthesis of the TGGE fingerprint profiles of chemical and physical DNA extraction methods to overcome the representative bias.     

以应对自然灾害为核心的应急资源投入保障机制研究

应急资源是应急管理工作的重要支撑力量,其保障能力的形成是通过应急资源投入保障机制实现的。针对以应对自然灾害为核心的应急资源投入保障机制,以应急资源投入保障机制的五大主体(中央政府、地方政府、中央部门、地方部门、社会力量)为研究枢纽,系统地梳理了我国应急资源投入保障机制的现状;结合重大案例,以保障过程的三个环节(资金筹集、资金使用和保障能力形成、监督协调)为研究线索分析当前我国应急资源投入保障机制存在的问题,并寻找出其核心症结,即缺少专门的应急资金体系支持应急管理工作和没有统一的应急管理机构;针对核心症结,进行思考并提出相应的政策建议:设立应急管理专用资金体系和建立一体化的应急管理机构。     

诱导结晶工艺中诱晶载体的选择与改性

以含铜废水为处理对象,重点考察了诱晶载体的表面性质及表面负荷对诱导结晶过程的影响。结果表明,在工艺启动初期,白云石以及碱式碳酸铜为诱晶载体时,铜的去除率在90%以上,石英砂对铜的去除率较低,但石英砂经表面改性后对铜的去除效率亦可达90%以上。在运行稳定后,几类诱导载体对铜的去除率皆能稳定在95%,说明诱晶载体的表面性质对诱导结晶工艺的影响主要在于反应启动初期,选择与目标结晶产物结构、成分相同或相似的诱晶载体有利于诱导结晶过程的进行。此外,研究结果还表明,诱晶载体表面负荷对结晶过程影响较大,诱导结晶除铜工艺中载体表面负荷不宜高于0.054 g Cu/(m2.d)。     

Effect of Nucleation of Tricalcium Phosphate and Isothermal Annealing on the Crystallization of Poly(l-lactide-co-glycolide)

We investigated the effect of nucleation and isothermal annealing on the crystallization behavior of a random copolymer, poly(l-lactide-co-glycolide) (PLLGA), with monomer molar ratios of 85/15 (PLLGA85/15) by scanning electron microscopy, polarizing optical microscopy, differential scanning calorimetry, and X-ray diffraction, and examination of the tensile properties of the resultant product. The effect of heterogeneous nucleation was assessed by the addition of tricalcium phosphate (TCP) as a nucleating agent. Nucleation and isothermal annealing of PLLGA at 130 °C were conducted to improve the degree of crystallinity of the copolymer. The fracture surfaces of the TCP/PLLGA85/15 composite bar showed a considerable number of spherulites with TCP as their nucleus. Addition of TCP and subsequent annealing improved the degree of crystallinity. After annealing, the TCP/PLLGA85/15 composite samples gained nearly the same strength that the pure PLLGA85/15 samples possessed. It is believed that this method will enhance the practical application of this nucleating agent in the processing of polymers.     

丙烯酸废水处理工程实例

采用气浮-动态微电解—水解酸化—接触氧化工艺,对无锡某化工总厂丙烯酸废水原工艺和设备进行了改造,经过调试运行,监测结果表明,进水COD为6 000～10 000 mg/L时,处理出水COD小于60 mg/L。出水达到太湖地区重点工业行业主要水污染物排放标准。     

结晶工艺在废水处理领域的应用与发展

结晶水处理工艺具有占地面积小、不产生污泥、可回收资源等优势,近年在国内外备受关注,随着理论和工艺技术的不断完善,其应用范围逐渐扩大。到目前为止,国外已将结晶水处理工艺成功应用于众多实际工程,但国内对其的研究仍局限于实验室阶段。基于上述原因,本文较全面地综述了结晶工艺在废水处理领域的发展现状,并重点对结晶工艺在磷酸盐、重金属的去除与回收以及工业防垢领域的理论研究和工程应用进展进行讨论,同时探讨了目前结晶工艺存在的几个问题以及下一步的发展方向。     

黑曲霉死菌与活性炭对直接耐晒翠蓝FBL的吸附性能

采用批式实验,系统考察了黑曲霉死菌和活性炭的粉剂投加量,染料初始浓度,pH和反应时间对酞菁染料FBL脱色效果的影响;并采用扫描电镜图像,分析吸附剂的结构变化。结果表明,对于FBL染料的吸附处理,黑曲霉死菌粉剂与活性炭粉剂适宜的吸附条件为:酸性至弱碱性pH下,投加量为8 g/L;黑曲霉死菌粉剂比活性炭粉剂的吸附速度快、脱色性能高、抗染料浓度负荷冲击能力强。扫描电镜图像分析显示,黑曲霉死菌粉剂所具有的多层纤维结构为吸附染料分子提供较大的比表面。     

掺硫改性TiO2对活性艳红X-3B的光催化降解性能研究

以硫脲为硫的源物质,以钛酸四丁酯为TiO₂的前驱体,采用溶胶-凝胶法制备了掺硫改性TiO₂光催化剂。以活性艳红X-3B为目标污染物,研究了该催化剂的光催化降解性能,对硫掺杂量、催化剂焙烧温度、溶液pH值以及催化剂添加量等影响因素进行了研究,并采用XRD分析手法对光催化剂进行表征。结果表明,经掺硫改性后的TiO₂的催化活性有了很大提高,且硫的掺杂有一个最佳值,即Ti∶S的摩尔比为1∶1。经掺硫改性的TiO₂在可见光区具备一定的催化活性, 180 min内对活性艳红X-3B的去除率可达35.1%,且在紫外光区的催化活性优于纯TiO₂。     

溇水上游古堰塞湖的发现及其水电工程意义

对溇水上游河湾岩溶渗漏研究中,在湘鄂交界的溇水河谷,发现了大型古滑坡体和堰塞湖沉积粘土层并对其进行了研究。对古滑坡体和堰塞湖作了简要介绍,对一些主要问题进行初步讨论和分析。古滑坡体约2000×104 m3,进入河道长度大于 1000 m;湖相沉积层厚度大于48 m,最大出露高程2841 m,根据14C测试,古堰塞湖形成于 10760±130~16880±250 a BP。通过分析认为堰塞湖水位大于285 m,堰塞湖沉积粘土层中出露的高硫酸盐地下水与当时沉积环境和粘土层本身无直接联系,沿河两岸粘土层产状变化可能与再次滑坡有关联;该研究成果对当前水电工程建设和研究溇水河流发育史、现代江河灾难性地质灾害的形成演化具有一定参考价值