连续流分段进水生物脱氮工艺控制要点及优化

主要介绍了分段进水生物脱氮工艺的系统工作原理及工艺特性,并探讨了该工艺运行操作和设计的几个重要影响因素,如进水流量分配比、溶解氧、污泥回流比、C/N比等,并在此基础上讨论了分段进水生物脱氮工艺的优化控制对策.     

人工湿地处理系统中多环芳烃的行为

采用Oasis HLB柱固相萃取的前处理技术,以气相色谱质谱联用仪(GC/MS)的分析方法,对我国北方永定河上游黑土洼人工湿地中多环芳烃污染的特征以及分布规律进行了研究.结果表明,该湿地系统以低环数多环芳烃污染为主,其中浓度最高的是菲和蒽,未检出高环数(5环、6环)多环芳烃.通过比较进水和出水的浓度,湿地系统总体上不能有效去除进水中的多环芳烃.但是比较不同工艺单元进出水浓度,复氧、植物根系及微生物等均影响到多环芳烃的去除效果,去除率在28%～65%之间.     

粉末活性炭对膜过滤性能的影响

向一体式膜生物反应器中投加粉末活性炭(PAC),可以显著提高膜的过滤性能,有效缓解膜的污染.研究结果表明:投加PAC的吸附作用减少了由于胞外聚合物(EPS)而引起的膜污染;膜表面PAC颗粒的存在减小了浓差极化层的厚度和水力边界层的厚度,提高了过滤物质的传递速率;膜表面形成的PAC层还可过滤微生物和胶体颗粒,减少了它们到达膜表面的数量.     

电极材料对电解法处理循环式准好氧垃圾填埋场渗滤液效果的影响研究

分别用3种不同材料电极（不锈钢、Ti／Pt和Ti／RuO2-IrO2）作阳极、石墨电极作阴极在同一条件下分别对循环式准好氧填埋垃圾场渗滤液进行电解处理对比研究。研究结果表明，随着电解时间的变化，渗滤液中的COD、BOD5、BOD5／COD、重金属离子浓度、色度和pH值均会发生改变。当电解时间为10—20min时，用上述3种电极作阳极电解均会出现渗滤液COD、BOD5、BOD5／COD增大的现象；当电解时间为30—40min时，用Ti／RuO2-IrO2或Ti／Pt电极作阳极电解均可使渗滤液的色度降为0；当电解时间为120min时，分别用3种电极作阳极电解都可使渗滤液中的COD、BOD5和重金属得到有效的去除，其中用Ti／RuO2-IrO2电极作阳极电解对COD、BOD5的去除效果最好：用Ti／Pt电极作阳极电解对Pb^2＋的去除效果最好。     

HCHs and DDTs in sediment-dwelling animals from the Yangtze Estuary, China

HCHs and DDTs in sediment-dwelling animals including mollusks and crabs from the Yangtze Estuary were determined by GC-ECD. Levels of t-HCH were in the range of 1.2-5.5 ng g(-1) and averaged 3.5 ng g(-1) in mollusks, while t-DDT concentrations ranged from 26.0 to 68.8 ng g(-1), with a mean of 34.5 ng g(-1). In crabs t-HCH concentrations varied from 2.0 to 25.7 ng g(-1) and averaged 13.8 ng g(-1), whereas the concentrations of t-DDT were in the range of 1.5-24.8 ng g(-1) with a mean value of 5.9 ng g(-1). The HCHs and DDTs levels depend on geographical position and sources, showing the high levels at fresh water area in the estuary, such as XP, CM and LHK sites, and lower at brackish water area, such as FX site, and little difference between species. Results also indicate there was no significant relationship between t-HCH (t-DDT) concentrations and lipid contents both in mollusks and crabs because of non-equilibrium state under a specific estuarine dynamics; smaller individuals accumulated more HCHs and DDTs than larger individuals of mollusks at LHK site, showing different uptake rate for these pesticides; moreover, HCHs and DDTs levels were lower in female crab bodies than male crab bodies suggesting that the release of spawning. BSAFs (Biota- Sediment Accumulation Factors) from sediment-dwelling animals for HCHs and DDTs show a significant "one high with two low" and "one low with two high" effect in the Yangtze Estuary.     

Characterizing the risk assessment of heavy metals and sampling uncertainty analysis in paddy field by geostatistics and GIS

For many practical problems in environmental management, information about soil heavy metals, relative to threshold values that may be of practical importance is needed at unsampled sites. The Hangzhou-Jiaxing-Huzhou (HJH) Plain has always been one of the most important rice production areas in Zhejiang province, China, and the soil heavy metal concentration is directly related to the crop quality and ultimately the health of people. Four hundred and fifty soil samples were selected in topsoil in HJH Plain to characterize the spatial variability of Cu, Zn, Pb, Cr and Cd. Ordinary kriging and lognormal kriging were carried out to map the spatial patterns of heavy metals and disjunctive kriging was used to quantify the probability of heavy metal concentrations higher than their guide value. Cokriging method was used to minimize the sampling density for Cu, Zn and Cr. The results of this study could give insight into risk assessment of environmental pollution and decision-making for agriculture.     

新型高效污水处理设备--集成一体化生物转筒反应器

介绍了一种新型高效污水处理设备--集成一体化生物转筒反应器(IBDR).IBDR具有微生物浓度高、活性强、生物相分级明显、耐冲击负荷、污泥沉降性能好和不产生污泥膨胀、操作简单灵活、运行成本低等显著特点;并成功地运用于处理餐饮污水和深圳某厂洗涤剂生产废水.在处理餐饮污水时,IBDR比传统的生物转盘处理效果高出20%.     

混凝-生物接触氧化法处理城市污水的研究

采用混凝-生物接触氧化法处理生活小区废水,考察了不同混凝剂用量对COD、NH4-N、SS、TP的去除效果,同时研究了生物接触氧化法对COD、NH4-N等的去除以及耐冲击负荷能力.结果表明,随混凝剂用量的增加,COD、SS、TP的去除率随之增加,生物接触氧化法具有较高的抗冲击负荷能力,最大NH4-N去除负荷达到0.55 kg/(m3·d),最大有机去除负荷达到4.32 kg/(m3·d)     

Trace metal behaviour in the Conwy estuary,North Wales

The distribution of trace metals Zn, Ni, Mn, Fe, Cu, Pb, Cd and Cr between suspended particulate matter (SPM) and water in the Conwy estuary, North Wales, has been studied in three surveys in 1998. Dissolved Cu and Mn showed some monthly variations. Most of the dissolved trace metals displayed a negative association with salinity, indicating rivers as a major source of inputs for them. Particulate Zn, Mn and Fe showed a decreasing concentration seaward, whilst the levels of Ni, Cu, Cr and Pb increased with salinity. SPM concentration was the most important variable significantly related to trace metal concentrations in SPM, with an inverse relationship between the two parameters. This was explained by the relative enrichment of trace metals in fine particles at low SPM concentrations and relative depletion of trace metals in coarse particles at high SPM concentrations. Particulate Zn, Mn and Pb were dominated by the fraction available to acetic acid (non-detrital), whilst particulate Ni, Fe and Cr were dominated by the fraction available to nitric acid (detrital). The partition coefficient of trace metals between SPM and water declined with increasing SPM concentration, consistent with the so-called "particle concentration effect". Such a phenomenon may be explained by the presence of fine particles (including colloids) enriched with trace metals at low SPM concentrations, and the salinity-induced desorption.     

Effect of silica sand on activation energy for diffusion of sodium ions in montmorillonite and silica sand mixture

The effect of silica sand on the diffusion of sodium ions in mixtures of montmorillonite and silica sand was studied by measuring the apparent diffusion coefficients, activation energies for diffusion, and the basal spacing of the mixed samples. These diffusion experiments suggest that the apparent diffusion coefficients of sodium ions in the mixed samples were almost the same as those of pure montmorillonite samples having the same partial dry densities of montmorillonite. The activation energy dependence for diffusion of sodium ions on the partial dry density was different between the mixed samples and the pure montmorillonite samples. The activation energy increased by adding silica sand at the partial dry density of 1.0 Mg m(-3), and decreased by adding silica sand at the partial dry densities higher than 1.2 Mg m(-3). A change in the XRD profile was observed after adding silica sand at the partial dry density of 1.6 Mg m(-3). Here, a three-water-layer hydrate state of montmorillonite was found in the mixed sample whereas only a two-water-layer hydrate state was observed in the pure montmorillonite sample. These experimental results suggest that silica sand changed the montmorillonite microstructure in the mixed samples, which then altered the sodium-ion diffusion process.