涕灭威在植物和土壤中的移动与分布

报道了涕灭威在花生、棉花、柑橘和土壤中的吸收、运转和分布。结果表明，涕灭威及其代谢物在柑橘叶子中的残留４０ｄ达到最高峰（３．４４９ｐｐｍ），可食部位的残留范围为０－０．０８９ｐｐｍ，低于美国ＥＰＡ规定的ＭＲＬ。涕灭威在土壤中降解较快，半衰期约１周。收获时土壤中的检出范围为０－０．１５７ｐｐｍ。涕灭威及其代谢物水溶性很强，且具有渗透和扩散性，因此使用不当可能造成地下水污染。     

溢油指示物(指标)HPLC-UVD研究

建立了溢油指示物（ 指标）ＨＰＬＣ—ＵＶＤ 相似性模式，给出了溢油指示物（ 指标）ＨＰＬＣ—ＵＶＤ 相似性的择近原则，指出溢油指示物（ 指标）ＨＰＬＣ—ＵＶＤ相似性主要受控于油种、风化和实验误差等因素的影响。结果表明，ＨＰＬＣ—ＵＶＤ 相似性模式可作为溢油指示物（ 指标） 。     

Spatiotemporal trends of PM2.5 and its major chemical components at urban sites in Canada

To evaluate the effectiveness of emission control regulations designed for reducing air pollution, chemically resolved PM_2.5 data have been collected across Canada through the National Air Pollution Surveillance network in the past decade. 24-hr time integrated PM_2.5 collected at seven urban and two rural sites during 2010-2016 were analyzed to characterize geographical and seasonal patterns and associated potential causes. Site-specific seven-year mean gravimetric PM_2.5 mass concentrations ranged from 5.7 to 9.6 µg/m³. Seven-year mean concentrations of SO₄^2?, NO₃^?, NH₄⁺, organic carbon (OC), and elemental carbon (EC) were in the range of 0.68 to 1.6, 0.21 to 1.5, 0.27 to 0.71, 1.1 to 1.9, and 0.37 to 0.71 µg /m³, accounting for 10.8%-18.1%, 3.7%-16.7%, 4.7%-7.4%, 18.4%-21.0%, and 6.4%-10.6%, respectively, of gravimetric PM_2.5 mass. PM_2.5 and its five major chemical components showed higher concentrations in southeastern Canada and lower values in Atlantic Canada, with the seven-year mean ratios between the two regions being on the order of 1.7 for PM_2.5 and 1.8-7.1 for its chemical components. When comparing the concentrations between urban and rural sites within the same region, those of SO₄^2? and NH₄⁺ were comparable, while those of NO₃^?, OC, and EC were around 20%, 40%-50%, and 70%-80%, respectively, higher at urban than rural sites, indicating the regional scale impacts of SO₄^2? and NH₄⁺ and effects of local sources on OC and EC. Monthly variations generally showed summertime peaks for SO₄^2? and wintertime peaks for NO₃^?, but those of NH₄⁺, OC, and EC exhibited different seasonality at different locations.     

Degradation of poly(butylene adipate-co-terephthalate) by Stenotrophomonas sp. YCJ1 isolated from farmland soil

In recent years, poly (butylene adipate-co-terephthalate) (PBAT) has been widely used. However, PBAT-degrading bacteria have rarely been reported. PBAT-degrading bacteria were isolated from farmland soil and identified. The effects of growth factors on the degradation of PBAT and the lipase activity of PBAT-degrading bacteria were assessed. The degradation mechanism was analyzed using scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, X-ray diffraction, and liquid chromatography-mass spectrometry. The results showed that Stenotrophomonas sp. YCJ1 had a significant degrading effect on PBAT. Under certain conditions, the strain could secrete 10.53 U/mL of lipase activity and degrade 10.14 wt.% of PBAT films. The strain secreted lipase to catalyze the degradation of the ester bonds in PBAT, resulting in the production of degradation products such as terephthalic acid, 1,4-butanediol, and adipic acid. Furthermore, the degradation products could participate in the metabolism of YCJ1 as carbon sources to facilitate complete degradation of PBAT, indicating that the strain has potential value for the bioremediation of PBAT in the environment.     

预处理方法对供应态LD钢超塑性压缩性能的影响

研究了国产新型冷作模具钢LD钢(7Cr7Mo3V2Si)经球化退火与循环退火后的超塑性压缩的力学特性.试验结果表明,经循环退火后的LD钢,其超塑性压缩性能优于球化退火,而且其最佳超塑性压缩的工艺参数也存在差异.     

以浮游植物评价金堂水库富营养化

通过对浮游植物的生物量、优势种、初级生产力、叶绿素ａ等指的分析，判断金堂水库质已达富营养化水平；网箱养鱼是产生富营养化的主要原因；富营养化对水库功能的不利影响将是很骓消除的。     

矿井水中天然总α放射性的混凝处理技术研究

本文研究了混凝沉淀工艺处理矿井水中天然总α放射性核素铀、镭的技术和条件,通过选择适当的混凝剂、加药量、pH值等条件可将铀的去除率提高到80％左右,使用铀专用混凝剂MHU则可使铀的去除率达到87％。对于镭的去除不能单纯依靠铀混凝剂MHU,尚需添加镭的吸附助剂MHR,则可使镭的去除率提高到80％以上。该工艺的最大优点在于充分利用了煤矿现存的大量矿井水悬浮物处理设施,大大节省了新建工程的投资费用,而且新增加的药剂费用不足0.1元/t水,可在煤矿推广应用。     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

PM2.5中类腐殖质表面活性测定方法与实例分析

建立了大气细粒子中类腐殖质（HULIS）表面活性的动态表征方法,并以华北平原乡村站点冬季大气PM_2.5样品为例,对PM_2.5中HULIS的表面活性进行表征.HULIS碳质组分（HULIS-C）浓度为2.0~4.6μg C/m³,占水溶性有机碳和总有机碳的比例分别为31%~40%和20%~26%.浓度为88~200mg C/L的HULIS水溶液,其表面张力相对于纯水降低了18%~22%.HULIS-C浓度在低于70mg C/L时表面张力降低显著,在88~320mg C/L之间降低相对缓慢.动态表面张力随着时间变化逐渐降低,在液滴形成后200s以内表面张力下降迅速,之后趋于平缓,说明表面活性分子在液滴中扩散趋于稳定需要一定的时间,该特征时间可能影响表面活性物质在云凝结核活化时的作用.证实了在污染地区的大气PM_2.5中含有一定量的表面活性物质,这些物质可能对颗粒物活化为云滴、雾滴过程产生显著影响;表面活性物质的存在可能在外界湿度变化过程中导致颗粒物发生液-液相分离现象,在颗粒物表面形成有机膜,影响活性分子摄取以及半挥发性物质的气-粒分配过程,从而影响大气非均相反应过程.