In vitro pesticide degradation in turfgrass soil incubated under open and sealed conditions

Degradation of selected pesticides was conducted in a turfgrass soil from a golf course under open (i.e., allowing gas exchange with atmosphere) and sealed systems. The time required for 50% of the initial dose of fenitrothion (O,O-dimethyl O-4-nitro-m-tolyl phosphorothioate), diazinon (O,O-dimethyl O-2-isopropyl-6-methylpyrimidin4-yl phosphorothioate), iprodione [3-(3,5-dichlorophenyl)-N-isopropyl-2,4-dioxo-imidazolidine-1-carboxamide], mecoprop [(RS)-2-(4-chloro-otolyloxy)propionic acid], and asulam (4-aminophenylsulfonyl-carbamate) to dissipate (half-life, t 1/2) was less than 2 wk under both conditions. The t 1/2 values of dithiopyr (S,S'-dimethyl 2-difluoromethyl-4-isobutyl-6-trifluoro-methylpyridine-3,5-dicarbothioate) were 324 and 185 d under the open and sealed conditions, respectively. The t 1/2 values of isoprothiolane (di-isopropyl 1,3-dithiolan-2-ylidene-malonate), flutolanil (alpha,alpha,alpha-trifluoro-3'-isopropoxy-o-toluanilide), and benefin (N-butyl-N-ethyl-alpha,alpha,alpha-trifluoro-2,6-dinitro-p-toluidine) under the open conditions were 154, 336, and 47 d, respectively. The t 1/2 values of these pesticides increased slightly under the sealed conditions. The t 1/2 values of terbutol (2,6-di-tert-butyl-4-methylphenyl N-methycarbamate) and one of the major degradation products, N-demethyl-terbutol (2,6-di-tert-butyl-4-methylphenyl carbamate), were 182 and 291 d under the open conditions and increased by six- and threefold under the sealed conditions, respectively. The degradation system under the sealed conditions could characterize the persistence of terbutol and N-demethyl-terbutol, which were the most persistent in the field.     

Carbon nanotube-like materials in the exhaust from a diesel engine using gas oil/ethanol mixing fuel with catalysts and sulfur

Particulate matter from a diesel engine, including soot and carbon nanomaterials, was collected on a sampling holder and the structure of the materials was studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). As a result of employing gas oil/ethanol mixing fuel with sulfur and ferrocene/molybdenum as catalyst sources, formation of carbon nanotubes (CNT)-like materials in addition to soot was observed in the exhaust gas from a diesel engine. It was revealed that CNT-like materials were included among soot in our system only when the following three conditions were satisfied simultaneously: high ethanol fraction in fuel, high sulfur loading, and presence of catalyst sources in fuel. This study confirmed that if at least one of these three conditions was not satisfied, CNT-like materials were not observed in the exhaust from a diesel engine. These experimental results shown in this work provide insights into understanding CNT-like material formation mechanism in a diesel engine.

Implications: Recent papers reported that carbon nanotube-like materials were included in the exhaust gas from engines, but conditions for carbon nanotube-like material formation have not been well studied. This work provides the required conditions for carbon nanotube-like material growth in a diesel engine, and this will be helpful for understanding the carbon nanotube-like material formation mechanism and taking countermeasures to preventing carbon nanotube-like material formation in a diesel engine.     

Co-composting of acid waste bentonites and their effects on soil properties and crop biomass

Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.     

Time trends of perfluorinated compounds from the sediment core of Tokyo Bay, Japan (1950s-2004)

Perfluorinated compounds (PFCs) were detected in sediment core samples collected in Tokyo Bay to reveal their time trends. The core sample deposited during 1950s-2004 was divided into two- to three-year intervals and the concentrations of 24 types of PFCs were determined. Perfluorooctane sulfonate (PFOS) decreased gradually from the early 1990s and its precursor decreased rapidly in the late 1990s, whereas perfluorooctanoic acid (PFOA) increased rapidly. The observed trends were regarded as a reflection of the shift from perfluorooctyl sulfonyl fluoride (PFOSF)-based products to telomer-based products after the phaseout of PFOSF-based products in 2001. The branched isomers of perfluoroundecanoic acid (PFUnDA) and perfluorotridecanoic acid (PFTrDA) were detected in the sample with its ratio of linear-isomer/branched-isomer concentrations decreasing. In this study, we revealed that the sediment core can serve as a tool for reconstructing the past pollution trend of PFCs and can provide interesting evidence concerning their environmental dynamics and time trend.     

Flame retardants in indoor dust and air of a hotel in Japan

Occurrence of flame retardants (FRs) in the indoor environment of highly flame-retarded public facilities is an important concern from the viewpoint of exposure because it is likely that FRs are used to a greater degree in these facilities than in homes. For this study, brominated flame-retardants (BFRs) and organophosphate flame-retardants and plasticizers (OPs), and brominated dibenzo-p-dioxins/furans (PBDD/DFs) were measured in eight floor dust samples taken from a Japanese commercial hotel that was assumed to have many flame-retardant materials. Concentrations of polybrominated diphenylethers (PBDEs) and hexabromocyclododecanes (HBCDs) varied by about two orders of magnitude, from 9.8–1700 ng/g (median of 1200 ng/g) and from 72–1300 ng/g (median of 740 ng/g), respectively. Concentrations of the two types of BFRs described above were most dominant among the investigated BFRs in the dust samples. It is inferred that BFR and PBDD/DF concentrations are on the same level as those in house and office dust samples reported based on past studies. Regarding concentrations of 11 OPs, 7 OPs were detected on the order of micrograms per gram, which are equivalent to or exceed the BFR concentrations such as PBDEs and HBCDs. Concentrations of the investigated compounds were not uniform among dust samples collected throughout the hotel: concentrations differed among floors, suggesting that localization of source products is associated with FR concentrations in dust. Passive air sampling was also conducted to monitor BFRs in the indoor air of hotel rooms: the performance of an air cleaner placed in the room was evaluated in terms of reducing airborne BFR concentrations. Monitoring results suggest that operation of an appropriate air cleaner can reduce both gaseous and particulate BFRs in indoor air.     

Degradation of polychlorinated dibenzo-p-dioxins in aqueous solution by Fe(II)/H2O2/UV system

The photodegradation of polychlorinated dibenzo-p-dioxins (PCDDs), which include tetra- to octa-CDDs (TeCDD, PeCDD, HxCDD, HpCDD and OCDD), was carried out in the presence of Fe(II) and H2O2 mixed reagent. The degradation efficiency was strongly influenced by UV irradiation, and the initial concentrations of H2O2 and Fe(II). An initial TeCDD concentration of 10 ng l(-1) was completely degraded within 20 min under the optimum conditions. All PCDDs tested were successfully degraded by Fe(II)/H2O2/UV treatment and complete degradation of TeCDD, PeCDD and HxCDD was achieved within 120 min. PCDD photodegradation rates decreased with the number of chlorine atoms. The degradation process of TeCDD by this system seems to be initiated by an oxidative reaction (OH* radical attack) because less chlorinated DDs as intermediate products were not detected. From the Frontier electron density calculation, the first OH* radical attack positions on TeCDD were found to be four C atoms neighboring two O atoms. The decomposition of TeCDD gave 4,5-dichlorocatechol as an intermediate product. A TeCDD degradation scheme was proposed based on the identified intermediate and the values of Frontier electron density. Based on these results, Fe(II)/H2O2/UV system could be useful technology for the treatment of wastewater containing persistent pollutants such as dioxins and polychlorinated biphenyls.     

Reactions of model compounds of phenol resin in sub- and supercritical water under an argon atmosphere

Model compounds of phenol resin were reacted in sub- and supercritical water to clarify the mechanism of the decomposition reaction of plastics in water. Cleavage reaction of methylene bonds was confirmed in the reactions of model compounds of phenol resin such as bis(hydroxyphenyl)methanes in sub- and supercritical water under an Ar atmosphere, although the methylene bond was stable in thermal reactions. It was also confirmed that sub- and supercritical water played important roles not only as a stable solvent thermally, but also as a chemical reagent. Received: July 19, 2000 / Accepted: September 14, 2000     

Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials

The removal of heavy metals from plating factory wastewater with economical materials was investigated by the column method. Montmorillonite, kaolin, tobermorite, magnetite, silica gel and alumina were used as the economical adsorbents to wastewater containing Cd(II), Cr(VI), Cu(II) and Pb(II). This removal method of heavy metals proved highly effective as removal efficiency tended to increase with increasing pH and decrease with increasing metal concentration. The removal percentages by adsorption onto montmorillonite, tobermorite, magnetite, and silica gel showed high values for all metals. From the results for the heat of adsorption, the adsorption process in the present study might be chemisorption. The proposed method was successfully applied to the removal of Cd(II), Cr(VI) and Cu(II) in rinsing wastewater from plating factory in Nagoya City, Aichi Prefecture, Japan. Since the economical adsorbents used can be obtained commercially because they are easily synthesized, the wastewater treatment system developed is rapid, simple and cheap for the removal of heavy metals.     

江西九连山区常绿阔叶林林冠截留量的估算

为了研究常绿阔叶林小流域的水分平衡,我们在江西九连山区进行了３ａ林外雨量、林内雨量和树干流量的观测,并据此进行了年林冠截留量的估算。观测结果表明,林冠截留率由一次降雨量为０．４～１ｍｍ的７８．１％逐步降低到一次降雨量为６０ｍｍ的３．４％～３．６％。一次降雨量大于６０ｍｍ时,林冠截留率基本稳定在这一百分数。１９８８、１９８９和１９９０年３ａ的年降水量在１７１８．５～２１１６．５ｍｍ之间。估算结果表明,年林冠截留量在３００～３４０ｍｍ之间,约为年降水量的１６％～１７．５％。