Assessment of the aerosol water content in urban atmospheric particles by the hygroscopic growth measurements in Sapporo,Japan

Aerosol water content (AWC) of urban atmospheric particles was investigated based on the hygroscopic growth measurements for 100 and 200 nm particles using a hygroscopicity tandem differential mobility analyzer in Sapporo, Japan in July 2006. In most of the humidogram measurements, presence of less and more hygroscopic mode was evident from the different dependence on relative humidity (RH). The volume of liquid water normalized by that of dry particle (V_w(RH)/V_dry) was estimated from the HTDMA data for 100 and 200 nm particles. The RH dependence of V_w(RH)/V_dry was well represented by a fitted curve with a hygroscopicity parameter κ_eff. The κ_eff values for 200 nm particles were in general higher than those for 100 nm particles, indicating a higher hygroscopicity of 200 nm particles. Based on the κ_eff values, the volume mixing ratios of water-soluble inorganic compounds (ammonium sulfate equivalent) were estimated to be on average 31% and 45% for 100 and 200 nm particles, respectively. The diurnal variation of κ_eff, with relatively higher values in the noontime and nighttime and lower values in the morning and evening hours, was observed for both particle sizes. The V_w(RH)/V_dry values under ambient RH conditions were estimated from κ_eff to range from 0.05 to 2.32 and 0.06 to 2.43 for 100 nm and 200 nm particles, respectively. The degree of correlation between κ_eff and V_w(RH)/V_dry at ambient RH suggests a significant contribution of the variation of κ_eff to atmospheric AWC in Sapporo.     

Gasification and smelting system using oxygen blowing for plastic waste including polyvinyl chloride

A new type of waste gasification and smelting system using oxygen blowing based on high-temperature metallurgy, was developed by Sumitomo Metals, Japan. This system can steadily gasify and melt not only municipal waste, but also plastic waste and polyvinyl chloride (PVC) waste by using a top-blow oxygen lance together with sideways-blow oxygen lances. As a result of gasification in the high-temperature reducing atmosphere and rapid gas cooling, dioxin-free, high-calorie purified gas was produced. Ash components in the wastes were smelted in a high-temperature reducing atmosphere, and high-quality slag free of heavy metals was produced. Most of the chlorine in the wastes was converted into hydrogen chloride in the off gas. The hydrogen chloride can be recovered as hydrochloric acid or chlorine, which are recyclable to PVC manufacturing.     

Load of Heavy Metals in the Airborne Dust Particulates of an Urban City of Central India

The geographical and temporal distribution patterns of airborne dust particulates have been studied in different representative areas of Raipur City. Dust fall samples from different sites were collected and some selected toxic metals namely Cr, Mn, Fe, Ni, Cu, Zn, Sb and Pb in them were determined by AAS. Total annual flux of 11.7, 541.4, 2751.0, 14.2, 9.8, 90.9, 17.6, and 17.7 kg km(-2) y(-1) were measured for Cr, Mn, Fe, Ni, Cu, Zn, Sb, and Pb respectively. The occurrence of metal concentration were generally in the order industrial > heavy traffic > commercial > residential area in Raipur city. The results of analysis show the existence of toxic metal concentration in the order Fe > Mn > Zn > Pb approximately Sb > Ni > Cr > Cu in Raipur city. These large levels of metal pollutants have also been correlated with some meteorological parameters like temperature, relative humidity and wind velocity, and strong positive correlations have been observed.     

Maternal-fetal distribution and transfer of dioxins in pregnant women in Japan, and attempts to reduce maternal transfer with Chlorella (Chlorella pyrenoidosa) supplements

Dioxins can be transferred from mother to fetus via the placenta, or to nursing infants via breast milk, potentially causing developmental health problems in children. To assess pediatric health risks from dioxins, exposure of mothers and children to dioxins must be clarified. Methods of reducing maternal transfer of dioxins should also be investigated. Concentrations of 28 dioxin (polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and co-planar polychlorinated biphenyls) congeners in blood, adipose tissue, breast milk, cord blood and placenta collected from 44 pregnant Japanese women were measured. In addition, to investigate potential reductions in maternal transfer of dioxins, 23 pregnant women were instructed to take Chlorella pyrenoidosa supplements during pregnancy. Correlations were observed between dioxin total toxic equivalents (total TEQ) in blood and total TEQ in adipose tissue (r=0.913, P<0.0001), breast milk (r=0.695, P=0.0007), and cord blood (r=0.759, P<0.0001). Dioxin levels transferred to fetuses and nursing infants reflect cumulative maternal concentrations of dioxins. A linear regression equation was introduced to predict total TEQ in breast milk and cord blood from dioxin levels in maternal blood, which should prove useful in evaluating fetal and infant risk of dioxin exposure. Total TEQ in cord blood were approximately 26% lower than in maternal blood (P<0.0001). The results of this study suggest that transplacental transfer differs depending on the dioxin congener. Total TEQ in breast milk were approximately 30% lower in the Chlorella group than in controls (P=0.0113). This finding suggests that maternal transfer of dioxins can be reduced using dietary measures such as Chlorella supplements.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.     

Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials

The removal of heavy metals from plating factory wastewater with economical materials was investigated by the column method. Montmorillonite, kaolin, tobermorite, magnetite, silica gel and alumina were used as the economical adsorbents to wastewater containing Cd(II), Cr(VI), Cu(II) and Pb(II). This removal method of heavy metals proved highly effective as removal efficiency tended to increase with increasing pH and decrease with increasing metal concentration. The removal percentages by adsorption onto montmorillonite, tobermorite, magnetite, and silica gel showed high values for all metals. From the results for the heat of adsorption, the adsorption process in the present study might be chemisorption. The proposed method was successfully applied to the removal of Cd(II), Cr(VI) and Cu(II) in rinsing wastewater from plating factory in Nagoya City, Aichi Prefecture, Japan. Since the economical adsorbents used can be obtained commercially because they are easily synthesized, the wastewater treatment system developed is rapid, simple and cheap for the removal of heavy metals.