Surface clogging process modeling of suspended solids during urban stormwater aquifer recharge

Aquifer recharge,which uses urban stormwater,is an effective technique to control the negative effects of groundwater overexploitation,while clogging problems in infiltration systems remain the key restricting factor in broadening its practice.Quantitative understanding of the clogging process is still very poor.A laboratory study was conducted to understand surface physical clogging processes,with the primary aim of developing a model for predicting suspended solid clogging processes before aquifer recharge projects start.The experiments investigated the clogging characteristics of different suspended solid sizes in recharge water by using a series of one-dimensional fine quartz sand columns.The results showed that the smaller the suspended particles in recharge water,the farther the distance of movement and the larger the scope of clogging in porous media.Clogging extents in fine sand were 1 cm,for suspended particle size ranging from 0.075 to 0.0385 mm,and 2 cm,for particles less than 0.0385 mm.In addition,clogging development occurred more rapidly for smaller suspended solid particles.It took 48,42,and 36 hr respectively,for large-,medium-,and small-sized particles to reach pre-determined clogging standards.An empirical formula and iteration model for the surface clogging evolution process were derived.The verification results obtained from stormwater recharge into fine sand demonstrated that the model could reflect the real laws of the surface clogging process.     

基于水质模拟的不确定条件下两阶段随机水资源规划模型

针对流域内不同企业的水资源分配及企业生产污染排放导致的水环境问题,运用区间两阶段随机规划的方法,耦合区间两阶段模型（ITSP）和区间水质模型（IS-P）,建立不确定两阶段随机水质-水量耦合规划模型（ITSP-SP）.该模型以流域内系统利益最大为目标函数,模拟了流域内各个企业的水量分配及排污过程中河道水质变化,并在保证河流水质达标前提下优化预计分配水量,调整企业生产规模.通过模型运算得到区间解,为管理者提供了多样的决策方案.并且,该模型充分考虑不确定因素对系统利益的影响,能够有效的规避系统决策失误及方案缺失现象.     

基于传声器阵列的声源定位技术的应用

基于传声器阵列的声源定位技术中的两个主要方法,STSF和Beamforming声源定位技术两者的实现方法不同。通过对STSF和Beamforming声源定位技术的推导,给出了两种测量技术适用的频率范围和空间范围,从理论上对其应用范围的差异进行了说明,并提出在实际测量中如何选择合适的声源定位方法。结合两种测量技术的特点,提出声源定位技术下一阶段研究的重点。     

隔离式减振垫浮置板道床施工工艺的探讨

介绍隔离式减振垫浮置板道床施工工艺、基本原理、施工特点、施工设备和作业人员配备。针对浮置板道床高度及构成、轨道基础施工、隔振垫铺设施工、轨排铺设施工、隔离式减振垫道床钢筋及混凝土施工、伸缩缝的设置、密封条及防水层施工进行分析和论述,提出安全质量控制措施。     

成都市典型非道路工程机械排气烟度分析

采用不透光烟度计采集了成都市典型工程机械(挖掘机、装载机、叉车和压路机)排气烟度,研究了机械功率对其活动水平(燃油消耗量和年均工作时间)的影响,同时也研究了机械发动机构造和机械排放标准对其排气烟度的影响;同时,采用氮硫测定仪分析了机械油品硫含量,研究了硫含量对其排气烟度的影响.试验结果表明:机械功率越大的工程机械,燃油消耗量和年均工作时间数越高.成都典型工程机械排气烟度排放水平最低的为装载机,最高的为压路机;同时,超高排放装载机与叉车的占比较高.工程机械排气烟度受机械发动机排量、机械发动机构造、机械发动机排放标准和机械用油的综合影响,通过对工程机械装配电控发动机、提高原机排放标准和使用低硫燃油均能直观反映出机械排气烟度不同程度的改善.此外,油品中硫含量越高,机械排气烟度越大.     

Effect of manganese oxide-modified biochar addition on methane production and heavy metal speciation during the anaerobic digestion of sewage sludge

Low organic matter content and high heavy metal levels severely inhibit the anaerobic digestion (AD) of sewage sludge. In this study, the effect of added manganese oxide-modified biochar composite (MBC) on methane production and heavy metal fractionation during sewage sludge AD was examined. The MBC could increase the buffering capacity, enhance the methane production and degradation of intermediate acids, buffer the pH of the culture, and stabilize the sewage sludge AD process. The application of MBC positively impacted methane production and the cumulative methane yield increased up to 121.97%, as compared with the control. The MBC addition can improve metal stabilization in the digestate. An optimum MBC dose of 2.36?g was recommended, which would produce up to 121.1?L/kg volatile solids of methane. After the AD process, even though most of the metals accumulated in the residual solids, they could be transformation from the bio-available fractions to a more stable fraction. The total organic- and sulfide-bound and residual fraction content at a 3?g dose of MBC that is 0.12?g/g dry matter were 51.06% and 35.11% higher than the control, respectively. The results indicated that the application of MBC could improve the performance of AD and promote stabilization of heavy metals in sewage sludge post the AD process.     

Changes in distribution and microstructure of bauxite residue aggregates following amendments addition

Bauxite residue is a highly alkaline byproduct which is routinely discarded at residue disposal areas. Improving soil formation process to revegetate the special degraded lands is a promising strategy for sustainable management of the refining industry. A laboratory incubation experiment was used to evaluate the effects of gypsum and vermicompost on stable aggregate formation of bauxite residue. Aggregate size distribution was quantified by fractal theory, whilst residue microstructure was determined by scanning electron microscopy and synchrotron-based X-ray micro-computed tomography. Amendments addition increased the content of macro-aggregates( 250 μm) and enhanced aggregate stability of bauxite residue. Following gypsum and vermicompost addition, fractal dimension decreased from 2.84 to 2.77, which indicated a more homogeneous distribution of aggregate particles. Images from scanning electron microscopy and three-dimensional microstructure demonstrated that amendments stimulate the formation of improved structure in residue aggregates. Pore parameters including porosity, pore throat surface area, path length, and path tortuosity increased under amendment additions. Changes in aggregate size distribution and microstructure of bauxite residue indicated that additions of gypsum and vermicompost were beneficial to physical condition of bauxite residue which may enhance the ease of vegetation.     

Air pollution characteristics and their relationship with emissions and meteorology in the Yangtze River Delta region during 2014–2016

With rapid economic growth and urbanization, the Yangtze River Delta(YRD) region in China has experienced serious air pollution challenges. In this study, we analyzed the air pollution characteristics and their relationship with emissions and meteorology in the YRD region during 2014–2016. In recent years, the concentrations of all air pollutants, except O_3,decreased. Spatially, the PM_(2.5), PM_(10), SO_2, and CO concentrations were higher in the northern YRD region, and NO_2 and O_3 were higher in the central YRD region. Based on the number of non-attainment days(i.e., days with air quality index greater than 100), PM_(2.5) was the largest contributor to air pollution in the YRD region, followed by O_3, PM_(10), and NO_2.However, particulate matter pollution has declined gradually, while O_3 pollution worsened.Meteorological conditions mainly influenced day-to-day variations in pollutant concentrations. PM_(2.5) concentration was inversely related to wind speed, while O_3 concentration was positively correlated with temperature and negatively correlated with relative humidity.The air quality improvement in recent years was mainly attributed to emission reductions.During 2014–2016, PM_(2.5), PM_(10), SO_2, NO_x, CO, NH_3, and volatile organic compound(VOC)emissions in the YRD region were reduced by 26.3%, 29.2%, 32.4%, 8.1%, 15.9%, 4.5%, and0.3%, respectively. Regional transport also contributed to the air pollution. During regional haze periods, pollutants from North China and East China aggravated the pollution in the YRD region. Our findings suggest that emission reduction and regional joint prevention and control helped to improve the air quality in the YRD region.     

气溶胶等效复折射率反演的免疫进化算法

通过Mie散射理论公式构建目标函数,利用免疫进化算法对气溶胶等效复折射率的实部和虚部进行协同优化,据此创新性地提出了气溶胶等效复折射率反演的新途径.基于成都市2017年9~12月逐时的气溶胶散射系数和吸收系数观测数据以及该时段同时次GRIMM180大气颗粒物监测仪的连续监测资料,研究结果表明,气溶胶等效复折射率反演的免疫进化算法不仅是普适的,而且还具有收敛速度快、计算稳定和求解精度高等特点.通过与其它气溶胶等效复折射率反演方法的对比分析,进一步论证了新方法的优势,这为气溶胶等效复折射率演变机理以及气溶胶吸湿性增长模型的后续研究提供了算法保障.     

WRF-Fluent耦合模式的构建及其对城市大气扩散的精细化模拟

为了准确刻画城市环境中的复杂建筑结构对大气运动和污染物输送及扩散过程的影响,结合中尺度模式WRF和微尺度模式Fluent构建了单向耦合的WRF-Fluent模式,并将其应用于榆中县城区高架源排放情景下大气扩散的模拟研究.基于城市气象/示踪外场试验期间获取的气象数据对WRF模式的模拟性能进行验证,发现WRF能够为Fluent提供比较准确的随时间变化的气象驱动场.在此基础上,将榆中县城区三维几何模型嵌入到WRF-Fluent中,对城区内的流场及污染烟羽的时空演变过程进行精细化模拟,并将模拟结果与实测示踪物浓度数据进行比对.结果显示,WRF-Fluent模式可以很好地描述城区内的复杂三维风场结构以及污染烟羽随时间的动态变化特征,而且模拟的地面和城市冠层顶浓度最大值基本位于观测值的0.3~3倍之内,这表明构建的WRF-Fluent模式具有较好的模拟性能,可作为一种有效的工具应用于实际城市规划和空气质量改善以及环境风险评估等方面的研究.