试用模糊数学方法对电焊作业防护措施进行综合评价

选择北京市四家锅炉厂的电焊工５６名，即从事手把焊、氩弧焊、ＣＯ２气体保护焊、电弧气爆等特种工种作业人员。通过调查，提出单项四级评分标准，再依模糊数学模型，进行综合评价。按Ｂ＝Ａ·Ｒ，求得Ｂ中最大元为０．７０７。最后总评为甲级。此结果与权数分配有关。此方法，可为劳动卫生管理（防护措施评级）提供依据。     

钻井废水的处理

本文针对钻井废水的处理，综述了现有的处理方法、处理药剂以及处理装置，并对钻井废水的处理、排放提出了一些意见和建议。     

火灾模拟结果误差分析的函数分析法

火灾试验结果和模拟预测结果常能表达成关于时间变化的曲线,为定量描述两种随时间变化曲线间相符合的程度,引入误差分析的函数分析法。采用适合于低Mach数流修正的N-S方程描述烟气的输运过程,使用大涡模拟和Smagorinsky亚格子模型,对封闭空间内的火灾过程进行数值模拟;对其计算结果的分析表明,函数分析法能定量对模拟预测曲线与试验曲线间的差别进行描述,模是两曲线值大小的相对误差的度量,余弦是两曲线形状相似程度的度量。     

基于粗糙集与GIS的滑坡地质灾害风险评估——以广西梧州为例

针对梧州市地质环境条件、地质灾害发育情况,选取地貌类型、坡度、河水侧蚀、地层岩性、残坡积层厚度、断裂发育情况、年降雨量、道路工程活动和建筑工程活动9个因子作为滑坡地质灾害危险性评估指标;选取人口密度、土地资源、交通设施、房屋及其附属价值和抗灾能力5个因子作为承灾体易损性评估指标,通过地理信息系统空间分析技术和粗糙集理论,划分研究区评估单元,构建滑坡地质灾害危险性与承灾体易损性评估知识表达系统和决策表,实现决策表的优化和各指标权重的计算。给合地质灾害风险评估模型,将研究区滑坡地质灾害风险性分为极高风险、高风险、中风险和低风险区,其中,极高风险区约占研究区总面积的6.44%,主要沿傍山而建的城镇和切坡坡度、坡高较大的交通干线分布。研究结果表明,粗糙集与GIS的组合方法能合理可靠地评估滑坡地质灾害风险性,对类似地区的滑坡地质灾害风险评估具有借鉴意义。     

一株微生物絮凝剂产生菌的培养基优化研究

利用单因子实验和部分因子实验对实验室保藏的产絮凝剂菌种C3的培养基进行优化,以提高C3菌所产生的微生物絮凝剂MBFC3的絮凝效果.实验结果表明,C3菌产MBFC3的最适培养基为: 蔗糖1.0 g,(NH4)2SO4 0.24 g,FeSO4 0.10 g,KH2PO4 0.40 g,MgSO4 0.01 g,NaCl 0.02 g,蒸馏水100 mL,pH值自然.在此培养条件下,C3菌所产生的微生物絮凝剂MBFC3对高岭土悬浮液的絮凝率可达到99.1%.实验中还发现,培养基中(NH4)2SO4和NaCl的用量是影响MBFC3絮凝效果的显著因素.     

Distribution and assessment of mercury (Hg) in surface sediments of Futian mangrove forest,China

Environmental Geochemistry and Health - To investigate the distribution of mercury (Hg) in Futian mangrove wetland, surface sediments from land to sea were collected, including Kandelia obovata,...     

复合菌种协同发酵酒糟生产饲料蛋白研究

以笔者选育的８５０３和８５０５复合菌种为试验菌,以白酒糟为原料,经最适试验,确定最优条件为：培养温度３０．０℃,初始ＰＨ５．５,（ＮＨ４）２ＳＯ４添加量为５ｍｇ／ｍｌ,投料量１０％,接种量５－１０％,发酵期限５ｄ,在最适条件试验的基础上,进行了５Ｌ发酵罐试验,发酵产物粗蛋白质含量由２３．７５％提高到３５．７５％,提高了１１．００％,其中真蛋白质提高１０．３４％,粗纤维降低了２．０５％,氨基酸总量由     

磷酸盐工业中的放射性污染及其防治

磷矿石中含有一定量的天然放射性物质，在工业生产中，这些物质不仅会在产品、副产品和三废中富集，还会通过生产和使用中的不同环节扩散到周围环境中，对环境造成污染。云南必须对此综合研究，制订措施，使磷化工产业开发与保护并重，可持续发展。     

Low-temperature CO oxidation over Au-doped 13X-type zeolite catalysts: preparation and catalytic activity

Au-supported 13X-type zeolite (Au/13X) was synthesized using a common deposition–precipitation (DP) method with a solution of sodium carbonate as a precipitate agent. Further testing was conducted to test for catalytic oxidation of CO. A study was conducted on the effects of different preparation conditions (i.e., chloroauric acid concentration, solution temperature, pH of solution, and calcinations temperature) on Au/13X for CO oxidation. In respect to the catalytic activity, the relationship between different the preparation conditions and gold particles in 13X zeolite was analyzed using X-ray diffraction, TEM and XPS. The activity of Au/13X catalysts in CO oxidation was dependent on the chloroauric acid concentration. From XRD results, a higher chloroauric acid concentration induced larger gold nanoparticles, which resulted in lower catalytic activity. Results revealed that higher temperatures induced higher Au loading, homogeneous deposit, and smaller gold clusters on the support of 13X, resulting in higher CO activity. Furthermore, a pH of 5 or 6 generated greater amounts of Au loading and smaller Au particles on 13X than at a pH of 8 or 9. This may be a result of an effective exchange between Au(OH)2Cl2- and Au(OH)₃Cl^- on specific surface sites of zeolite under the pH’s 5 and 6. The sample calcined at 300°C showed the highest activity, which may be due to the sample’s calcined at 200°C inability to decompose completely to metallic gold while the sample calcined at 400°C had larger particles of gold deposited on the support. It can be concluded from this study that Au/13X prepared from a gold solution with an initial chloroauric acid solution concentration of 1.5 × 10^-3 mol·L^-1 gold solution pH of 6, solution temperature of around 90°C, and a calcination temperature of 300°C provides optimum catalytic activity for CO oxidation.     

Fenton试剂和氨吹脱法处理苯唑醇废水的试验研究

采用Fenton试剂催化氧化和氨吹脱法对苯唑醇生产废水的处理进行了研究。实验结果表明 ,此方法对废水的CODCr和氨氮具有良好的去除效果 ,平均去除率分别达到 73 .5 %和 95 %以上。处理后废水的BOD5 CODCr>0 .45 ,其可生化性良好。该技术具有能耗低、操作简便等优点